Optimal location and sizing of DG IEEE 14 using GA - Matlab Code Explanation

[@SimulationTutor]

simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/

[@asadabbas_vlogs]

Sir You did not divide the DG value by base value? can you explain by code as there is no conversion in load flow also

[@asadabbas_vlogs]

Hello Sir. Can you tell me about your analysis. When you integrate the DG at the system, why do not divide with the base value. Can you please tell me about that. And also tell me the DG sizes are in MW. Thank you

[@SimulationTutor]

In the loadflow file, the DG value converted into PU by dividing, base value. Yes in Mw

[@sarmedal_bakri5751]

can u help me

[@SimulationTutor]

@@sarmedal_bakri5751 [e-mail]

[@sarmedal_bakri5751]

@@SimulationTutor i need email?

[@SimulationTutor]

[e-mail]

[@ogbedivine8629]

can you help me with the MATLAB code for PMU placement on IEEE 14 bus

[@SimulationTutor]

yes I can, your email?

[@ogbedivine8629]

@@SimulationTutor [e-mail] thank you

[@youssefboudhaouia1116]

Can you send me this too? PMU Placement! Thank you ... [e-mail]

[@renishraiyani465]

@@SimulationTutor Can you send me IEEE 14 Bus Optimum location and sizing of DG matlab code Email : [e-mail] Thank you

[@dariusmuyizere9462]

Hi ... I need the MatLab file for the ieee14 bus system for load shedding with time delay communication trip relay.

[@SimulationTutor]

Your email. I have done similar work too

[@dariusmuyizere9462]

@@SimulationTutor Plz help to obtain all requirement. [e-mail]

[@dr.gustavoperezhernandez1251]

I am trying to locate BESS for frequency regulation.

[@raoabdulwahab5548]

dear sir, do you have an examples of solving cost generation by OPF algorithm in MATLAB of IEEE 14 Bus System.

[@SimulationTutor]

your email?

[@renishraiyani465]

@@SimulationTutor Sir I required IEEE 14 bus system matlab code My email id is [e-mail] Thank you

[@iamNaddy_]

Hi Sir, mind if you show tutorial for capacitor placement using Golden Jackal Optimization method for IEEE30 bus system using GNU Octave ? (as an alternative for matlab) thank youu😭

[@SimulationTutor]

@@iamNaddy_ Capacitor placement code already done and shared on Gumroad store, using PSO optimization algorithm.

[@saravanakumarg1353]

Nice explanation... Thank you

[@SimulationTutor]

thanks.

[@dr.gustavoperezhernandez1251]

Dear Sir, will you have an example for the location of BESS in microgrids in matlab?

[@SimulationTutor]

your email?

[@dr.gustavoperezhernandez1251]

@@SimulationTutor [e-mail]

[@SimulationTutor]

@@dr.gustavoperezhernandez1251 sent.

[@riwamom7926]

do u have code ?

[@habeebayodejianibaba2685]

Hello sir, pls can I get a copy of the code? Also do you have anything about using Tabusearch for this same problem?

[@SimulationTutor]

Your email?

[@habeebayodejianibaba2685]

[e-mail]

[@naveenkumara4307]

@@habeebayodejianibaba2685 bro...can u send the Matlab code....Mail id:[e-mail]

[@miljankotlaja7621]

Can anyone send me a code for optimal placement capacitors for power factor correction using genetic algorithm or pso?

[@SimulationTutor]

[e-mail]

[@suvendranravindran851]

dear sir, do you have an examples of solving optimal location and sizing of dg using mais or ais?

[@SimulationTutor]

contact me by email [e-mail]

[@blackwhitetilak1254]

@@SimulationTutor sir please send this code to [e-mail]

[@TejaswiniPoojar]

sir can you please send me the source code that is attached to the matlab

[@SimulationTutor]

[e-mail]

[@aldijulioaritonang339]

Hello, sir. Do you have code using pso for this problem?

[@SimulationTutor]

Available, Email?

[@BasicElectricals]

Hello sir, Please provide the Matlab code of this video.

[@SimulationTutor]

sent.

[@husseinshutari5209]

@@SimulationTutor please send me code>([e-mail])

[@diproject6152]

Excuse me Sir. what if this Matlab code is used in radial system like IEEE 33Bus, may i use it for that case ? Big thanks,,,

[@SimulationTutor]

yes.

[@diproject6152]

@@SimulationTutor thanks.. what is the method in code used for load calculation ,Sir ?

[@SimulationTutor]

@@diproject6152 NR

[@diproject6152]

@@SimulationTutor thankssss

[@akhirsujono699]

Dear sir. In this case, what is the Fitness Value, the Genes, and the Population? can you define each one of them?

[@dk53792]

And additionally do you have some dg allocation code for p2g system? Very thankful !!

[@SimulationTutor]

Sent.

[@roshandahal4609]

WHERE IS THE OBJECTIVE FUNCTION DEFINED IN YOUR CODES SIR ????

[@SimulationTutor]

simulationtutor.com/

[@ibraheemumarchiroma8615]

Please sir do you have source code or a guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab

[@SimulationTutor]

Yes available, Email?

[@ibraheemumarchiroma8615]

[e-mail]

[@SimulationTutor]

sent.

[@AhmedMohammed-rm3yy]

thank you for your helpful video ,may you send me guide on how to implement this: ABC to determine the optimal operation of DG on Standard IEEE 34-radial distribution system using Matlab too, [e-mail] thanks

[@bushramanzoor7138]

Sir, do you have code of three phase system load flow analysis with dynamic load for voltage unbalance

[@SimulationTutor]

Email?

[@yoyopanda9299]

I want to know how which is the best algorithm for reliability improvement in distribution side using DG sets

[@SimulationTutor]

Email?

[@rajkumarkarki6270]

[e-mail]

[@rajkumarkarki6270]

I need also

[@hemantpatel1594]

Nice presentation sir

[@SimulationTutor]

Thanks.

[@dk53792]

Could you give some code about this with PSO algorithm? And for the ieee33 system?? Thanks!!

[@heylloitsmeinside9658]

could you give some code about this with genetic alghoritm? and for ieee 33 or 69 bus system?🙏🏼

[@SimulationTutor]

simulationtutor.com/

[@TejaswiniPoojar]

sir yet I didn't get the code

[@SimulationTutor]

[e-mail]

[@MuhammadSohaib-ri1rs]

Well explained. Can i get the code with 1 DG, 2 and 3DG's?

[@SimulationTutor]

simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/

[@chamithimanka5761]

Please sir Do you have source code or a guide on how to implement this: the optimal location and sizing of DG on Standard IEEE 14-distribution system using Matlab

[@SimulationTutor]

Email?

[@amanmishra3701]

Sir ,if you have any guide to implement this source code for optimal location and sizing of dg on standard ieee 14 distribution system , please provide me.

[@SimulationTutor]

Email?

[@mohamadali1615]

hello Sir ... Can I get this model and code? please sir

[@SimulationTutor]

Your email?

[@mohamadali1615]

@@SimulationTutor [e-mail] thank you

[@inverso12PPP]

@@SimulationTutor Sir, could you also send the code to my email? [e-mail] Thank you in advance!

[@mohamadali1615]

@@SimulationTutor Sir I want this code please

[@AhmedASakr-fp5kq]

@@mohamadali1615 could you send me code please

[@kirandevireddy]

Hello please send the matlab code for IEEE 14 BUS

[@SimulationTutor]

Your email?

[@kirandevireddy]

@@SimulationTutor [e-mail]

[@SimulationTutor]

Check email

[@kirandevireddy]

@@SimulationTutor thank you sir

[@kalyanchakravarthy9853]

Can you send me IEEE 14 Bus Optimum location and sizing of DG matlab code if possible with integration of EVCS.

[@SimulationTutor]

Email?

[@shoaibahmad3012]

Do you code for 9 bus IEEE system sir?

[@SimulationTutor]

Yes, send me email.

[@shoaibahmad3012]

Thanks Sir

[@gsmahesh01]

hi sir/mam, nice presentation.....how the DG location is identified....also GA implementation.....it is very useful for the demonstration....u have done a great job sir.... Iam faculty from AP....thank you again....

[@sharadsuman8609]

can you please send me the code on [e-mail]

[@mohitkumarmeena5262]

Hello Sir ...Can I get this model and code? please sir it is very helpful for my project work.

[@SimulationTutor]

Please contact us on email.

[@dugasagetachew]

Sir please can I get the source code?

[@SimulationTutor]

[e-mail]

[@shwekarmahmood3853]

Hi sir can you help me with my these, please?

[@SimulationTutor]

[e-mail]

[@DrZia-qc8wx]

Really nice

[@kalyanchakravarthy9853]

Can you send me IEEE 33 Bus Optimum location and sizing of DG and Electrical vehicle charging station matlab code

[@nurtbmtv]

hey bro do you have any luck? im currently writing my paper with regards to this too but havent had any progress

[@SimulationTutor]

Email?

[@fundamentalsofelectriccirc8830]

@@SimulationTutor hello could you please send it to me too [e-mail] thanks very much and perfecttt video

[@sableashay3]

Please share the code for 33 bus bus optimum location and sizing of dg🙏🙏 [e-mail]

[@SimulationTutor]

Audio Explanation Available. Watch video kzbin.info/www/bejne/fIKTaZxrdqaKfZo

[@ashutoshverma6240]

Please send me matlab code i want to implement for three different power generating units.

[@SimulationTutor]

sent

[@talibmu7389]

pls my frined can you send me the Matlab code I need it very much

[@talibmu7389]

my email ( [e-mail] )

[@MuhammadAhsan-fy4ej]

kindly send it to me at ([e-mail])

[@mostafizurrahman9090]

Great work!. Can i get the code with GA for optimal power flow analysis with IEEE-30 bus system? It'd greatly help me with my thesis!

[@SimulationTutor]

[e-mail]

[@riwamom7926]

do u help me ?

[@safalrajdhungana2079]

nice sir! can you have code for IEEE 33 bus system using same algorithm? if you have,can you provide?

[@SimulationTutor]

simulationtutor.com/

[@abbasrex8598]

Excellent work. How can I use solar DG in this case? Help please.

[@SimulationTutor]

Email?

[@abbasrex8598]

[e-mail]

[@amanmishra3701]

Dear sir, could you please send me the source code and explanation about this topic.

[@SimulationTutor]

Email.

[@rangavallibora388]

Sir, why im not audible

[@SimulationTutor]

some videos have audio too.

[@esubalewfikru6882]

It is very nice work !This tutorial is very nice .can i get the full code OF optimal placement of D FACTS AND DG?

[@SimulationTutor]

[e-mail]

[@madumathi6681]

Sir/Madam, Is it possible to get the code for all the cases for better understanding and implementing the same on IEEE 30 bus system. Nicely compared and explained if it was with voice it should have been understood very easily. Nice work. Thank you.

[@SimulationTutor]

Email?

[@manishamalik2579]

Can I get the code of Ieee 33 bus system thanks great explanation

[@محمدقاسممجيدمحمد]

​@@manishamalik2579 hi .. are you get the code of 33 bus ? If you get it , can you share it with me ? Thanks

[@sunnysingh-zd7od]

voice not coming

[@viveksaxena6914]

Please refer the reference of research paper.

[@anuragkumar8449]

Hi sir, can you please give all these source code

[@SimulationTutor]

[e-mail]

[@rupikagandotra6771]

Really nice work... Sir how to download it pls provide code

[@ceedy3817]

The video has no sound

[@SimulationTutor]

Check the recent videos.

[@ceedy3817]

@@SimulationTutor I'm working on optimal placement of DG. this is the video that seems to explain the working of the code, there is no sound however.

[@SimulationTutor]

@ceedy3817 Check recent videos, with sound.

[@dilkumarishreesh8667]

hello sir thank u for the video, can you send me the MATLAB code for IEEE 33 distribution system implementing the same algorithm please??

[@dilkumarishreesh8667]

[e-mail]

[@SimulationTutor]

Sent

[@NagaRaju-ys6rk]

@@SimulationTutor could you please send me code to [e-mail]

[@asmaanasser7394]

can you please sent the ieee 33 bus sys using the same algorthim @@SimulationTutor

[@shankarpandit2167]

hello sir please send me the matlab code for IEEE 14 BUS

[@SimulationTutor]

Your email?

[@shankarpandit2167]

[e-mail]

[@dharmalalavanya7169]

sir please upload matlab code on Optimal Storage Planning in Active Distribution Network Considering Uncertainty of Wind Power Distributed Generation

[@SimulationTutor]

I have using wind.

[@mohamedrasheed7922]

sir please provide the code. i have sent an email as well

[@SimulationTutor]

Check email.

[@naveenkumara4307]

Bro can u send the code?...my mail id:[e-mail]

[@naveenkumara4307]

@@SimulationTutor sir...pls send the Matlab code...mail id:[e-mail]

[@SimulationTutor]

simulationtutor.com/optimal-location-and-sizing-of-distributed-generation/

[@ADA_asukadigital_academy]

NICE explanation thanks sir can you send the MATLAB code this code help me for optimal placement of recloser and sectionalize switch in distribution system for my thesis

[@SimulationTutor]

Email?

[@mkmadhav8169]

NICE explanation sir, Awesome work can you send the MATLAB code this code help me for optimal placement of isolator and sectionalize switch in distribution system for my thesis

[@SimulationTutor]

[e-mail]

[@ayamgamosesazuure4051]

Good job and nice explanation, please can i get the code?

[@SimulationTutor]

Email?

[@NagaRaju-ys6rk]

@@SimulationTutor [e-mail]

[@NagaRaju-ys6rk]

Could you please send me this code to [e-mail]

[@rangavallibora388]

I cant hear your voice

[@104_abidali9]

Nice video. can you send a copy of the MATLAB code for this implementation?

[@SimulationTutor]

Email?

[@kaushalyadav1843]

@@SimulationTutor please send on [e-mail] also

[@NagaRaju-ys6rk]

@@SimulationTutor [e-mail]

[@SimulationTutor]

Sent.

[@kamalsingh-kk4tb]

please mail me

[@madhumithas1752]

Can you send your code?

[@SimulationTutor]

Email.

[@ashutoshbarik681]

sir please upload flow_cal matlab file...

[@SimulationTutor]

ashutosh barik your email?

[@SimulationTutor]

Your email?

[@SimulationTutor]

Your email.

[@harshmaurya38]

[e-mail] can you send me too please on this mail ?

[@saravanakumarg1353]

Sir... Please send this coding through the email id- [e-mail]

[@ArifHussain-ue8ho]

Sir, Very helpful videos. Can you send me the MATLAB code please

[@SimulationTutor]

Email.

[@immortalvoices2102]

please share this code with me

[@SimulationTutor]

[e-mail]

[@nitheshnaikl6822]

optimal location and sizing of 2 DG and 3 DG

[@SimulationTutor]

simulationtutor.com/

[@dganesh9391]

IEEE5 BUS ALSO UPLOAD PLEASE

[@SimulationTutor]

Thanks for comment, I will try to add.

[@SimulationTutor]

@wjdan alzwi your email?

[@asyrafaqil1553]

Please sir do you have source code or a guide on how to implement this to determine the optimal operation of DG on Standard IEEE 33-radial distribution system using Matlab

[@SimulationTutor]

Yes exactly.