3D ORIGAMI BASE TUTORIAL | Razcapapercraft 3

[@razcapapercraft]

I'm glad you made ​​it, it gets easier with time.

[@juliewarner4694]

Oh my goodness, watching and doing your tutorial has clarified and solved all the issues that I was finding hard to fathom out and processing with all my models......you have made my life so much easier for me, stress free model making.... yay.... alls suddenly come clear and dropped into place, I'm a super whizzy speedy expert now finding all models easier to complete......for that I am deeply grateful to you, my, I've been so blessed with finding you....God bless...🙃🙂😉☺🤗🤪🤯👍👍👍

[@sebastiansavuca7893]

Man you are COOL! You're tutorial's help's me very much! Good Luck with Origami 3D Art!

[@lele12349M]

How you make the pieces that puffy ??? I look on all you're videos "how to make 3d origami pieces 2" they just not get puffy . It's so hard to make it when they so thin . What should I do?

[@christygao7549]

Can you film a video that shows how to hold the pieces together tightly and how to glue the pieces plus what kind of glue should I use.

[@razcapapercraft]

Christy Gao Please watch the last tutorials on my channel

[@lunar_fox618]

Thank you now I know how to make a penguin I've been wanting to make!

[@Akhil24816]

Me too

[@long2204]

what are the pros and cons of using open and close bases. Essentially, what different strengths and weaknesses do each form have? For example, is the close base better for heavier designs? or is the open base more flexible?

[@razcapapercraft]

***** Close bases are more solid and have more stability and I use this base especially in the lower part of the models (such as in baskets , vases swans ...) Open base It is more flexible and use to models with multiple layers like Flowers designs made from several segments.

[@long2204]

razcapapercraft Thanks. Also, I have a problem. my pieces cannot come round to make a circle. I am currently attempting to complete the flower project using the open base but they cannot bend at all. I noticed your pieces are more curvy and that the pieces have circular holes. Mine is pretty much flat. What can I do? Can I give you and email to discuss this?

[@razcapapercraft]

***** Please look at How to make 3d origami pieces 2 ...at the end of the video I show how to make nice round shape . Here is the link kzbin.info/www/bejne/bpO9f41nbLecbKs

[@Farkasvezer]

Thank you very much. I love any kind of origami except kirigami. I already made a few smaller flower, but will try harder ones later when I have time to do so.

[@myst7656]

Ik its late but if I want to build using full sized notebook paper will I have to have more in the first row

[@razcapapercraft]

In the video ,decrease the pieces from 72 to 36,it is a very difficult model to decrease to 32 you must put a piece over 2 pieces from the raw beneath.

[@njmk5862]

This is the type of videos i make all day!!

[@emilysookhan7783]

I keep trying and trying and I'm not gonna give up, but this is kinda hard and I think I need some help....especially it's the pieces...

[@razcapapercraft]

Emily Sookhan Please send pictures at [e-mail] and i will try to help

[@tarsvini5323]

Hi can I know how many pisces did you use for the base and how many rows

[@richardmacleod730]

Hi Got the base figured out! and my pieces are much better looking also. I have a question, I want to make a regular size swan just like your small Black and White Swan. How will the size effect where the wing, neck and tail go?Do you have a video on the bigger size I can go by? Thanks so much!

[@DianaMartinez-kc2gh]

The hole in the Middle in my closed base is too closed. I dont know what im doing wrong. Its not open enough like your base.

[@sumitcharchi2950]

It i neccesary to do that step after making fold frm it ???

[@KR-sx5ul]

Hello. Nice work. I am new to 3d origami. I would like to make a shade for my lamp over the table in my dinning room. How can I realize this?

[@kristianklette7411]

Im going to make a 12 clased base but i cant conect it, mabe because of bad quality pieces but i realy hope its possible to make it conect

[@PriyaSingh-tx5dp]

Hi.. I have tried this two times but didnt end up with this type of round and upward structure.. I got a flat and downward structure.. :( Please suggest

[@anwar6479]

Umm, hi. I liked ur video very much but i m always getting it wrong. I dont understand how to make those pieces as fat and smooth like urs, and when i do it, the base never comes out correct. It always come like, how u have the holes on the underside of the base, mine comes inside and it comes like some sharp spiky base from the outside. I do not know what to do. Pls help.

[@lauriemoore964]

Have you made the base for Harley quinn? It has a inverted based for the body. I know it's not yours but could you help me?

[@Mihaela.Stoica]

Buna. Cum de iti ies gaurile de la piese asa de mari? Am folosit aceeasi marime, am bagat si piesele una in alta, dar degeaba, nu ies ca la tine. Eu am incercat baza pentru palaria omului de zapada..

[@alexalexx3612]

ti-a iesit perfect.ms mult fara tine nu reuseam sa fac nimic bafta in continuare!

[@variniaspartacus5860]

thanks ive figured it out you make it look so easy, very easy you must of been doing this for a while thanks for the reply.

[@edisonhe4716]

how many pieces for the closed base?

[@doublerainbow2213]

Thanks So Much! Now I can submit my Handycrafts Projects in school and I can have a grade! Thanks so much!

[@razcapapercraft]

Gayle Olayvar With pleasure

[@sunnyjttan6185]

You help me a lot with youtr tutorial. I managed to make a lot of the 3d origami from small to big ones Thank you very much

[@razcapapercraft]

With pleasure

[@edisonhe4716]

also, im making a giant model out of them without cutting the paper. Any suggestions? 24 looks too little?

[@razcapapercraft]

+Edison He I never try such large model

[@batzking6118]

Do i need to use glue for every piece or if I don't use glue would that still hold it ( for vase)

[@razcapapercraft]

bakhtiar khan I recommend you to glue all pieces

[@joekucik4322]

Thank you for making this video. I have been trying to figure out how to start a model and now I know. Thanks a lot.

[@razcapapercraft]

Budgie Man 67 With pleasure

[@richardmacleod730]

your work is incredible! I cant seem to get the round nose to look as good as yours! what am I doing wrong? Im using printer paper, 20# is it to light? Ive folded around 300 pieces, but they dont look as good as yours! I want to make 2 small black and whit swans for my grandaughter! HELP!!

[@razcapapercraft]

Richard Macleod I use 80 grams /sm paper

[@melaniegamad1634]

how the peces became stable? cpz mine they keep on falling apart.

[@jasonmead3734]

how does it turn out like that when i connect them it looks completely diffrent

[@njmk5862]

Keep going! Dont stop! Your videos are really cool!

[@acaldwell4242]

how do u make the pieces round, or can u direct me to a video that can show me how, been dying to find out how, to make my projects come out looking better, thanks in advance ,and wonderful work , we appreciate you.

[@razcapapercraft]

Alma Caldwell Please look at the end of '' How to make 3d origami pieces 2 '' or watch the last tutorials I uploaud on my channel

[@acaldwell4242]

thanks alot , and i will.

[@Colossumo]

Hi i'm trying to do the Peacock with the Open base, but i have a problem: i do the pieces with a printer papers (1/32) and the row tend to the orizontality if you have a contact i will sent you a photo so you can understand, thank you

[@razcapapercraft]

+Leonardo Pontecorvi If you try to make my 3d origami Peacock , that model is from small pieces 1/64 , You can send pictures to [e-mail]

[@evebaker9430]

I would like to make a bigger one but how many do I put on the base?? Please reply I have do ot befor but want a bigger one

[@razcapapercraft]

Eve Baker it's easy to make a bigger base , grow no pieces from rows

[@NotEnuff]

I want to make a base for the small swan in one of your other videos. How many pieces will I need for the smaller base?

[@razcapapercraft]

NotEnuff I do not know exactly what model you refer,ask the question to that tutorial

[@sofialarios4066]

Thank you so much, knowing he pieces are the normal way I was able to do put it up (: Thaaaaaaanks

[@rhymesandvibes]

You have to make puffy pieces or this won't work. 1) Make stacks of about 16 pieces or more. This widens them. 2) Use the round end of a pen to flatten (and fatten) each piece's bottom ie round bit, one at a time, starting from the top of the stack. Flatten the first piece, take it off the stack and repeat. 3)Put the last 5 or so pieces on top of the next stack for uniform width an repeat process I hope this ends your frustration 😊

[@user-tq4jm6cs3q]

You can also do them separately so they're the same. When I did this, my pen kinda ruined the paper XD

[@maciekaniszwski9526]

red Red jaki ty jesteś głupi

[@aashishoza966]

Omole Musah-Eroje z

[@billittc8292]

1:00

[@yashyelmame1460]

But what about the pieces at the bottom of the stack of 16 pieces they wont widen

[@SchleimerComics]

Great tutorial, really helped me! To all the beginners: It is nearly impossible if you can't make the pieces appear round,you should better first learn how to do so

[@razcapapercraft]

SchleimerComics Thank you ! I often say this but unfortunately very few people listen to me.

[@LilCdubs628]

I don’t understand how all of your prices fit together so perfectly did you cut yours a certain way or am I just bad?

[@BcoolBijan]

Will the origami swan still work if you use the Open base?

[@razcapapercraft]

It is better to use closed base. You can use open base too.

[@richardmacleod730]

Hi I glued my base it kept falling apart! Again your work is the best Ive seen on this subject ,in my opinion! I have a request...Will you sell me two small swans? One with wings spread and one black and white, I love those! I am the type who works better when I can actually have the item in my hand, dont know why but thats the way I am! Please think about it, Again GREAT STUFF!!

[@razcapapercraft]

Richard Macleod I do not sell 3d origami models , please send a message to [e-mail] and I will try to help you

[@sylkefurkert5491]

Hi, can you tell me please, which propotion ist perfectly for the pieces?

[@razcapapercraft]

i do not understaind what you mean with ''propotion''

[@MewMewChild]

1/32 of a normal sheet of paper (Din A4)

[@jennalarson6249]

My base won't flip up, they are only layering outward. I squeeze the edges up and it just pops back into the flat circle. It is currently a 30 base with four rows and I am using construction paper. Any ideas?

[@jennalarson6249]

My triangles also keep unfolding themselves when they aren't stacked up.

[@razcapapercraft]

please send a picture to [e-mail]

[@kirstyhorton6102]

Hi iv tryed to do this and it just falls apart , really wantrd to make it for my little boy , can u tell me what am doing wrong please

[@razcapapercraft]

Send a picture to [e-mail]

[@sofialarios4066]

I just have another doubt, how do I decrease the pieces? Like I have a 72 pieces row, hot do it decrease it to 36? D:

[@sandracaraballo1853]

Hi razcapapercraft, finally I done the dragon, isn't really nice like your but i made it. I would like to send a picture. This is my second dragon what I made. How can I send the picture I need your constructive critical.

[@razcapapercraft]

+Sandra Guevara Send a picture to [e-mail]

[@dwarfi5233]

Se vede ca esti Roman de al nostru! ;)

[@pictureperfect7291]

Thanks, your origami is amazing! I am going to try this. Your channel is brilliant and you teach at exactly the right pace for me. Thank you!

[@razcapapercraft]

Creative Cupcake14 Whit pleasure

[@kenmiles4145]

Could you do a tutorial on a earth glode please?

[@alyssabowman1822]

cant you use regular typing sheet? and my base always comes out small

[@razcapapercraft]

+Alyssa Bowman I am not sure what ''typing sheet '' mean , tell me the dimension of the paper

[@alyssabowman1822]

Letter size

[@legostarwars1011able]

I have 24 pieces on the bottom and it doesnt look like your! Im getting confused, and my peces dont look like yours with the big openings, plz help

[@razcapapercraft]

liam sonmor Send some pictures to [e-mail]

[@helenyang8270]

How many pieces do you need to make a base for your 3D origami swan small model 1?

[@razcapapercraft]

15 pieces in a raw

[@helenyang8270]

Ok thanks!

[@lauriemoore964]

hello is there a way to make a inverted base with 8 pieces in 5 rows

[@razcapapercraft]

No , you can not make a inverted base with only 8 pieces in a row

[@latagandhi3770]

And i hv d same problem as bandedoje frm video 2 of makin pieces buh i don cut them

[@jarisiponen8725]

How many sheets you used?

[@kennethangas1258]

bro how did u make ur pockets on the pieces so fat and big while mine is so flat and spiky....pls.need answers.i want to make one too

[@razcapapercraft]

Kenneth Angas Watch '' How to make 3d origami pieces 2 '' .Watch all movie and you will see how.

[@hillaryhong9217]

hey why is ur pieces so puffy mines are so flat any way to make it puffy so it can stand. thx

[@razcapapercraft]

+hillary hong Look at this video : kzbin.info/www/bejne/gIGkoad4mqh_a8U but look at the entire tutorial

[@entertainmenthub3375]

Can u please provide a paper description

[@razcapapercraft]

surya singh I use normal printer paper 80g/sm format A4 297mm/210mm

[@DADMel00]

do u think u can give me a few pointers?

[@Tsukino1011]

May I ask sir where do u get the big color paper from and your tutorial was awesome I would like to see more

[@SincerelySanjana]

hello! how many pieces of origami do i need to make the 3d base for the swan?? plz reply fast! i need this for my school project. (i am making the exact model of your small swan.)

[@razcapapercraft]

15 pieces in a raw *

[@SincerelySanjana]

razcapapercraft thank you!

[@razcapapercraft]

try to use glue ,or try to put 4-5 raw instead of 3

[@thiagochequi2722]

Hello, I'm from Brazil. I like mt from your origami job.

[@razcapapercraft]

Thank you

[@Mochi-sk7ik]

Should the pieces really be in the same size? Or it's okay if it's not? Cmon, helllppp!!!

[@razcapapercraft]

+hime-chan luna What you mean for the same size? same dimension of the rectangle of paper ?

[@katrinah4094]

is it possible to use the open base to create a headdress??

[@razcapapercraft]

Yes it is posible

[@katrinah4094]

thanks

[@rajuchintada7526]

Thank you razcapapercraft for this video. By this video I learned how to make the 3D origami base. Thank you once again.

[@razcapapercraft]

+raju chintada With pleasure

[@nikkoleveaux5853]

How did the pieces get puffy? My are all skinny ;-(

[@razcapapercraft]

Look at How to make 3d origami pieces 2

[@juanitaduranleon9152]

How you make 'fat' pieces? my base looks smaller than yours

[@anthonycruz8]

Thanks this video really helps IM glad you made it

[@anujagunasekera3120]

How many pieces exactly did you use to make the origami open base? I look forward to your reply as soon as possible.

[@gabbymartinez6747]

1000

[@carceaclaudiu4496]

de ce atunci cand incerc sa fac aceasta baza piesele mele se curbeaza si se unesc altfel decat la tine ? Adica cu golurile spre interior si capetele spre exterior, nu cu ele in sus si in jos ?

[@razcapapercraft]

Carcea Claudiu Cel mai probabil piesele 3d origami sunt de proasta calitate . Trimite cateva poze la [e-mail]

[@carceaclaudiu4496]

am rezolvat pana la urma, dupa pararea mea a fost mult de munca si asta de 300 de piese..nu vreau sa stiu cum e la cele cu mii :) bravo pentru rabdare

[@helenhuntington1756]

Razcapapercraft, do you know how to make 3d origami set of drums?

[@razcapapercraft]

Helen Huntington I never try , maybe in fututre

[@helenhuntington1756]

razcapapercraft I would love it because my sister plays the drums and her birthday is coming up and I would love to make drums for her...thanks

[@weinaajo7593]

hey razcapapercraft ,how many pieces does it need for the base???

[@easandalim2700]

How did you make your pockets so puffy? Mine are really flat looking :

[@razcapapercraft]

Easanda Lim Please watch How to make pieces 2 (at the end) or watch may last tutorials

[@jennineeng4090]

I haven't been able to make the fat, round pieces? How do you o it? I watched the vid like 5 times. Sigh. You are so good!

[@sketchology_]

Same

[@samuelchen2219]

why does my base always bend inwards. like it bends on the place it's supposed to stand. anyone help i know it's confusing but

[@almamz1222]

Me gustó la forma que tiene de explicar con paciencia y sencillez. Gracias.

[@razcapapercraft]

Gracias

[@MrOlive2001]

Hi thanks for this video ! How can you put 24 pieces on the second row when I can only put 12 pieces .. o_O ? Something must be wrong right ?

[@razcapapercraft]

Olive Emile yes Something must be wrong , send some picture to my email [e-mail]

[@sabajagmaidze1834]

I can't make open base when I try I make close base

[@kenogames4856]

I'm trying to make open base and when i make it, it has so much small circle in the middle

[@SesamUbe]

That's the opposite of my problem. I'm trying to make the base with the inverted pieces and it's suppose to have a small circle in the center, but it's always wide

[@kai-qs4zf]

hey have you figured out the solution to the problem yet? because im also trying to do it but im also facing the same problem as you

[@rachelkitcher8877]

Keno Games fuck you I am a strong woman and I hate you

[@Henry-n7n8]

when making the closed base-do you double up on the pockets, or just fill 2 at a time?

[@adamnam4326]

Any new video for new 3d origami design coming soon ?

[@razcapapercraft]

Adam Nam Yes, i will make new video soon

[@sebastiansavuca7893]

Cate piese imi trebuie pentru baza la small swan (model 1)?

[@razcapapercraft]

+Xx XxVirusxX xX Baza e facuta din 4 randuri , 3 normale si unul inversat , fiecare rand are 15 piese in total sunt 60 de piese

[@sebastiansavuca7893]

Aha mersi mult!Ai putea sa faci un clip cu un caracter din Terraria sau ceva din Terraria?Ar fi super! :D

[@samstandish4768]

uhhg is their any way i can send u a pic or something mine looks like a base of a x-mas tree im confised but i dont wana give up!

[@cynthiaxie8416]

When I put the pieces together, it always falls apart :( any suggestions?

[@razcapapercraft]

+Cynthia Xie Use glue

[@cynthiaxie8416]

razcapapercraft Ok, thanks!

[@fatenkara1315]

how do you make the pieces so big

[@marisaaracena3589]

Faten Kara stack the pieces up, making the ones on the top big.

[@sabamalik3291]

Which paper are you using please tell me.

[@razcapapercraft]

+Saba Malik I use normal printer paper 80g/sm , format A4 (210*297mm)

[@sabamalik3291]

Thank you

[@sabamalik3291]

shall i use computer printed paper for this

[@razcapapercraft]

+Saba Malik Yes

[@abhinavharindran6653]

can i do with big and small pieces

[@razcapapercraft]

abhinav harindran Yes

[@nyagachchuol]

What kind of paper do you use

[@razcapapercraft]

Nyagach Chuol normal colored printer paper 80 g/sm format A4(297/210mm)

[@DADMel00]

on how to do the base without it coming to the side?

[@razcapapercraft]

I do not understand what you mean ''it coming to the side''

[@DADMel00]

whenever i put the pieces together, the pointy edges of the pieces, are not facing upwards like they should be. Instead the pointy ends are pointing out towards the sides

[@anujagunasekera3120]

Really nice! Although, when I tried to make an open base, I actually completed it but it never stood still! As in when I tried to stabilise but it didn't work it just opened then it was something like a......spiral I geuss.

[@razcapapercraft]

Anuja Gunesekara thank you , use glue

[@anujagunasekera3120]

Okay. I'll try that, hopefully it works

[@takerdk20]

what kind of sheet do you use?

[@razcapapercraft]

I use A4 printer paper

[@lilahrosecrafting]

Absolutely beautiful

[@revathitaha7882]

u use small pieces or big pieces

[@revathitaha7882]

plz fast reply ..... i need it for school project

[@razcapapercraft]

Sorry to respond so late, I do not understand what model you mean.

[@MrPotasz]

Hi bro, I've just started to follow your tutorials and it's been great! I've just finished the open base, and it looks very nice, but it's much smaller than yours, i did with 24 pieces in a row. I used a A4 sheet of paper divided by 16, is it right? Thanks a lot, my greetings from Brasil!

[@razcapapercraft]

Pietr Kropotkin I used a A4 paper divided by 32 .I do not understand how yours is lsmaler if you did it in larger pieces. Can you send me some pictures to [e-mail] and measure rectangle of paper in which you make 3D origami piece .

[@MrPotasz]

razcapapercraft I think I had a wrong impression, only the whole in the middle is smaller, but I will send you pictures anyway. The swan model is done and it looks very nice for a first time. thanks for the attention!

[@shashikakumarasri8090]

Sfy

[@wandapotter7761]

How to keep them together when making

[@razcapapercraft]

I use glue

[@latagandhi3770]

Can anyone tell me hw to mak those pieces so fat with a4 printwr paper

[@razcapapercraft]

Lata Gandhi I have 2 videos about how to make 3d origami pieces ...If you look at 2 videos you will learn how to make ' fat ' pieces . I use A4 printer paper too .

[@kukufds290]

Which paper are u using z it hard paper

[@razcapapercraft]

normal printer paper 80g/sm

[@theamazinggreencat4044]

how do I make my base flip up? I tried squeezing the edges to make it pop up but it just make a flat circle all over again.

[@razcapapercraft]

TheAmazingGreenCat The base flip up by itself.If the base not flip up means that: pieces are not made properly. Send some pictures to [e-mail]