Razer Viper V3 Pro is not a good mouse

Razer released an update recently to fix this issue...which to their credit..seems fixed now. As of 6/15/24 I haven't gotten this issue anymore.

[@-djofull-]

Update: The new firmware helped a bunch however the mouse still feels a bit wonky. I don't know how to explain. Some reddit users agree so hopefully the firmware updates are going to keep coming. Happy gaming friends.

[@lak0cs]

I Was using Viper V3 pro past month. My aim and kill potential lowered. Still sensor issue , probablyproblem with motion sync

[@BrothersByBud]

Holy fucking cope lol. I've been using the V3 Pro for about a month and it has no sensor issues at all. Get off your boomer 400 dpi and switch to 1600. Dial in your smart tracking in Synapse. If you're still blaming the sensor after that, you either have a faulty mouse or are coping to an insane degree.

[@Roberto_Lcr]

same problem, mouse stops working...

[@mlsyra84621]

I'm not sure if people in other countries think the same way, but Razer has been around in my country for decades. From a time when everyone was using Razer to now, when it's almost impossible to see anyone using Razer, the market share has dropped significantly. This decline is mainly because of their drivers. Almost many stores do not sell Razer products because the drivers often cause problems with the mouse. The worst thing about Razer has always been its drivers. You could say that their mouse might not be terrible, but the drivers definitely are. Anyone who has used Razer products knows that whether it’s a keyboard or a mouse, the drivers are shit. The best way to describe it is that Razer's drivers have gone from being big shit to small shit over the past 10 years, but they are still shit. I don’t know if Razer hired a bunch of monkeys as engineers or what. The driver of a product can be made so complicated that ordinary users will not study these drivers at all. They will only know that there is a problem with the mouse and then change it. so only pro gamer will spend time torturing this thing

[@PatiphanPhengpao]

At first, I thought my Viper V3 Pro mouse had a sensor issue as well, but in reality, simply setting the smart tracking calibration to high solved the problem completely.

[@C4xFPS]

I had this issue for at least a few weeks. Thought my sensor was dirty, was considering taking the mouse apart to clean it. Update seems to have fixed the issue for me.

[@ObviouslyMich]

Blind guess but i have a feeling that motion sync is doing some funny shenanigans

[@mishalw210]

why steelseries devices died?

[@monolith757]

​@@mishalw210something oddly specific and private?) Who hurt y....

[@TicTac7x]

180€ btw

[@NyangisKhan]

They had ONE JOB! To make the dav3 in the shape of the viper v3 hyperspeed. That's ALL THEY HAD TO DO.

[@BrothersByBud]

@@NyangisKhan One of the biggest selling points of the V3 Pro is it's shape, but go off Queen!

[@333moon7]

On the steelseries prime I have some of these jumps (but slighter) when I put my mouse down after lifting it.

[@Gregapher]

Not the same thing, thats literally just you lifting the mouse and the sensor readjusting when you put it back down. The issue with the Viper 3 is that it will jerk around while you are swiping it, not lifting it.

[@333moon7]

@@Gregapher I know, I didn't say it was the same thing, but what you could see would look similar. Though sensor readjusting shouldn't jump 20+ pixels, especially when no other mouse I've tried ever had this problem. Even the old 3310 Zowie mice did not struggle with this.

[@Wingr]

The fact G2 is partners with Logitech G

[@thenatous_]

logitech is too lazy. and now their idea to make mouse subscription? hell no

[@KinSaniTriGaming]

Yup 100% my similar issue as well. They are aware of the issue, and I currently have a ticket with the support team of the issue.

[@-djofull-]

Awesome! The more tickets the quicker it gets fixed haha

[@marceloordenes2264]

Weird, I have one and I don´t have any of the issues on the video

[@awepizza]

No issues for me, updated the firmware anyway- How does your scroll wheel feel tho? Im going crazy cuz i think when you click down the scrolling feeling changes to less tactile a bit.

[@BrothersByBud]

I've noticed the scroll wheel can double click sometimes. I use it a lot to open links in a new tab and sometimes it will open two tabs off one click.

[@SchlagGameplay]

i actually had THIS exact problem with my GPX 2. Maybe its a PC Issue? was about to order a Viper V3 but now i'm not sure lmao

[@wimvanderbeek4115]

I have the mouse and love it. Never had anyproblems with the sensor and I have 2 copies. But there was a firmware update so maybe that has fixed the problems.

[@TRD_Nate]

I ran into the same issues with mine, and dumped it(returned it for a final mouse ULX and GPX Superlight2).

[@pantokrator1988]

What is that keyboard that Niko is using?

[@_wojtaspx_]

Razer Huntsman V3 Pro TKL White

[@ClumsyNinja301]

Same thing on mine. With a low LOD set, after picking up the mouse then set it back down it will not track unless I move it fast

[@-djofull-]

I'll try to adjust mine and see if it helps as well.

[@ClumsyNinja301]

@@-djofull- It should help. I have asymmetrical cut off enabled as well so it has the two slider bars...i have both of mine set at the midway point on the slider. The problem went away when I did that This is my second unit also. On my first one when i would use it wirelessly, the sensor would micro stutter constantly while gaming. I noticed it after like an hour of play time. At first i thought it was my game running like shit but it was doing it in multiple games. Ended up getting another unit from amazon and this one is fine now other than the LOD problem it has now.

[@-djofull-]

@@ClumsyNinja301 It helped significantly when I put it on low. Thank you it's actually usable now

[@gagagmzmsmzk5864]

The viper deathadder v3 pro HAS THE SAME ISSUE!

[@SamMaciel]

I experiencing similar with Razer death adder v3.. I thought cheap /wired =my fault.. Maybe not.. Anyways I'll try anything else besides Razer on next buying ound.

[@ottson]

I've had a similar issue with the Superlight 2. Sometimes freezes mid spray.. 2000 hz 800 dpi

[@manssupar]

My problem is my hand keep touch the scroll when i shoot people, it's mean when i shoot, my gun keep change to the knife. Viper mini is the best no delay no scroll issue but it's just too small

[@disfenio]

if you're only using 800dpi you're not reaching 2000hz anyway, you need to raise/use high dpi or you the mouse won't register higher refresh rates, you're basically draining your battery for no reason

[@ottson]

@@disfenio Interesting. Why are pro's using 4-8 khz with 400-800 dpi then?

[@disfenio]

@@ottson I think you overestimate pro players average knowledge on peripherals , you can test it out using a mouse hz checker either on browser or software, also, there is a lot info out there on this subject on youtube or reddit. Cheers

[@tyvert4882]

i mean its a newly innovated sensor sure to have some issues, its brand new? give it another two years and every mouse on the market will have a variation of it inside their mice. doesn't change how click bait this title is. its a great mouse.

[@Lucassena72483]

Tenho um mouse Razer aqui e estou bastante frustado, ele fica se desconectando toda hora, como se o pc não reconhecesse ou seria um problema em driver USB. Até agora nao consegui resolver o problema, infelizmente não tenho outro mouse aqui pra testar, queria jogar meu cs 😔

[@sfarsitulumi]

No issues for me

[@loadingmagic]

when you smash it on the desk it happens.

[@drugford]

no issues yet 2 weeks of use 8k polling rate default lift off settings

[@-djofull-]

I'm jealous

[@pori9192]

no issue for me

[@I3uttazz]

Turn smart tracking off its garbage turn on arrow cut off and then turn it all the way up.

[@Khy_r]

feel so good after just buying a gpx

[@clairvoyance7424]

old tech guess with discount haha

[@crazyquach7083]

still razer products are shit except their rgb hell yea

[@Guanjyn]

You guys are crazy still buying Razer products.

[@BrothersByBud]

I thought the same thing until I got the V3 Pro. The only Razer product I ever bought before that was a mouse bungie. The V3 pro is a fucking great mouse. Right on par with the superlight but imo has a better shape. Of course everyone and their mom singing praises about this mouse must just be cope right? Lmfao.

[@Guanjyn]

@@BrothersByBud They make good products but their build quality is and always has been garbage and that's speaking from experience. You're taking a big gamble paying that much with them.

[@dodoxd650]

@@Guanjyn you can always get a refund

[@lennydidthat]

Thought the same thing until I used one of their newer mice.

[@ottson]

I remember NIP, who are sponsored by Razer, once used a Razer headset that put them at a serious disadvantage in-game..

[@friendsRfor773]

RAZER SUX

[@Ov3rTheEdge30]

razer is a shit company and every thing i baught from them gets broke and this issue with sensor i have that too and had to buy superlight...

[@marcelbrummer5098]

lol my chinese vxe r1 pro is better quality than this thing