Tekno MT410 2.0 Full Review -- Most Controversial RC car of 2023? - Best 1/10 RC Monster Truck?

Affiliate links support the channel:
MT410 2.0: alnk.to/90xNkzy
Hobbywing MAX10 + 4S Motor combo: alnk.to/cwQXxSn
Gens Ace 4S Lipo: alnk.to/apRRMa8
I highly recommend you use M3x10mm screws like this: alnk.to/60YVCQv if your motor will allow it. It will hold the motor much more securely.
Social Media:
/ razorrc.ig
/ razorrc
Full Review of the 1/10 4wd RC Monster Truck, the Tekno MT410 2.0
#Tekno #MT410

[@klappars]

Thanks for pointing out the motor screws which are too short, I had this issue on my SCT410 2.0, the motor came loose due to the threads ripping out. I've since fitted longer, 12mm screws.

[@DavidFernandez-sc5ws]

If Tekno would of just named the first one the MT48 everyone would be going crazy that they made a 10th scale version

[@Valdemar-Perez-III]

Fr I just call it an 8th scale lol

[@RUZTY1311]

Im running 4s on the 12mm hexes. So far no issues. I'll be glad to report if I do run into problems over time. I dont slam the throttle from a stand still like some do and thats what shocks the drivetrain and strips wheel hexes 😅

[@CornholioMcGeeRC]

Great review as always!! 👍 I like your ratings as well but you gotta realize that most guys aren’t jumping 30+ feet like you nonetheless your expertise is appreciated!!

[@Jaguar-s7f]

Yeah, just crashing into telephone poles at 50mph. 😂

[@RazorRC]

True, that's why I mention the shocks are probably fine if you're keeping it under 5-10 feet.

[@RCPropaganda]

Is this like what the proline mt was? I had one of those but gave it away.

[@cheagle464]

Traxxas 8568 are 17mm with no grub screw and i had to grind them from 8mm thick to 4mm so the 8mm wheel nut had enough threads to get to the nylon. As long as the wheel nut stays tight the cross pins should stay put. I didn't have to search long to find these so there may be a better option i did not find. Also I'll probably go for the aluminum shock caps and washers under the pistons now that i know that could get to be an issue. And i added the center brace. I'm also needing to go back thru the build instructions for the option parts i feel I may use.

[@skyekaptain8010]

I'm tempted to build one.My original Mt has been a beast though,and shares parts with all the rest of my fleet Awesome review,and content.

[@ReadySetRC]

Great review👍 I'm holding out out to a see if an MT48 drops.

[@one4all885]

Both mt410 1.0 and 2.0 have the same wheelbase. The only difference is the 1.0 had wide truggy arms, while the 2.0 has the same width as sct and buggy. In what way is the 2.0 not 1/8 scale? For a monster truck it's 1/10, but still the same as a 1/8 buggy as it's always been. 1/10 the size of an elephant would still be massive. 1/10 of a human would be puny. Compare 1/10 of an elephant to 1/10 of a human and the human will still be smaller. The same way 1/1 elephant is that much larger than a 1/1 human.

[@Jaguar-s7f]

@@one4all885it has puny 1/10 shocks and hexes. Also, the chassis is 6061, not 7075 like the 1.0.

[@one4all885]

@@Jaguar-s7f there are no tekno kits made with 6061 aluminum chassis. That's cheap and weak aluminum. Both tekno trucks are super tough, as many are already posting vids. If it were made of 6061, it would bend after a 5 foot jump.

[@Jaguar-s7f]

@@one4all885This has a 6061 chassis. The 1/8 cars in contrast have 7075 chassis, and their ads prominently state that.

[@daig1984]

Happy new year 🥳 🪒 keep the fantastic honest videos coming

[@RazorRC]

HNY!

[@alexr9030]

Big fan of your reviews , This kit kit will be an hard pass for me , this is not a V2 of the old one by far. I can't build this one and put all my tires from my old mt410. I am glad I still have a new MT410 v1 brand new downstairs. Hope they release 17mm wheel hex, 4s , out of the box monster kit that replace the old one. Sorry Tekno this is a FAIL for me.

[@Audfile]

So what can you do about the suspension? I don't see an upgrade part. I'm not going off any 20 foot jumps though.

[@averylooper5534]

Great review we opened hours yesterday and we are excited! Upgrades coming soon. Motormount first

[@patmarcus172]

I’m sure we’re all looking forward to seeing what you do with this tekno.

[@RazorRC]

nice! enjoy the truck! motor mount and some redesigned shock shafts (with a washer) would be great!!!

[@jaypopsti]

Little shock oil or grease on the shock bodies makes installing the adjustment collars much easier

[@cheagle464]

Doing final tasks on my sct 2.0. It seemed like shock collars were cutting threads(?) then they went finger loose. Didn't try oil.

[@RUZTY1311]

Didnt need it with my build. They didnt use Orings this time so it was super easy to do. The plastic "dress" on the shock collar is what helps keep them snug instead of using orings :)

[@NorthernRC]

You do some really good reviews thank you for that and happy new year 🎉

[@patmarcus172]

Great job and thanks for turning it round so quickly. I don’t suppose the shocks from any of the tekno 1/8s would fit ? Wrong length ?

[@RazorRC]

I think they would be too long.

[@RUZTY1311]

I was told the shocks off the SCT410.3 work but you have to use different shock shafts. I have a screenshot of whats needed but cant post here lol

[@Namlesface_]

I honestly got the MT 410 used for $140 and I have to say throwing a short course truck body onto it and running it like a 4x4 sct it's a monster, it's just stupid fast controls really well and after adding an RX8 ESC and a 2050KV motor, with near 1-1 gearing this thing smokes anything I put it next to

[@GreatLakesRC]

Nice review! I don’t understand the marketing on this one. Yes, I am grumbling 😂 It’s not an MT410 it’s an MT version of the new SCT. I agree that on the merits of what it actually is, it looks like a good Tekno kit. I’m a little surprised that the shocks are not 1/8 scale sized and that the hex size is not 17mm 🤷‍♂️

[@toddbertram6556]

I still love my fist gen mt410, the tekno rigs just drive so nice and predictably. And of coarse they are more durable than most rigs.

[@pizzomedia7261]

Can't decide between the Outcast 4s 2.5 or the Tekno MT410 2.0. What would you go with. I'm familiar with the details of each. I just want to know what is going to be a better RC and of course always, the most durable and less of a headache to fix and maintain. I'm leaning towards building an MT410, but still considering the outcast if it holds up will and I don't need to upgrade a lot of things out of the box.

[@mattsoko1980]

Good vid but I wish you would compare it to other Tekno 1/10 vehicles. What's the difference? Chassis length? Arm length? Also width with wheels on is moot considering offsets etc. I still love your vids. Thanks!

[@BlairW66]

It's a completely different platform than their other "true" 1/10 kits.

[@mattsoko1980]

@BlairW66 How so? It's a redesigned "true" 1/10. It still has a wheelbase and a width. After 30 years it's been proven to me that most consumers choose their RC by the way it looks and not specs. Tires and body are easily changed along with electronics.

[@jwess1234]

You rated this 4 for performance. What do you consider a 5 in roughly the same size. (Mostly driving in the grass so handling there means more than jumps). Coming from ET48, which is too big.

[@kenkim9112]

Thank you for video. If yokomo cal 3.1 10.5t what pinion gear thank you... happy new year!

[@electricnitrorc]

Probably the best 1/10 monster truck available. But it costs thereafter 🙂👍 great review as always 👌 Wish you a happy new year 🎉 🎆

[@RazorRC]

happy new year!

[@michaelarrington9478]

Try the Traxxas variable dampening pistons. Not many options for 13 mm shocks u can switch the direction u want the most dampening a drilled the holes a mm larger & belled the opening of the hole on the unvalvled hole they are perfect. My rustler 4x4 is much heavier than stock and this really made it more controllable. I have the same hobbywing system & love it 50 tooth spur & 23 ; tooth pinion & it barely gets warm & all I run r 2.8 mt tires. Jetkos, prolines etc

[@RazorRC]

these shocks use a really unusual design, other pistons won't work.

[@TomatoPotat0]

you think they'll make a successor to the original 1.0 ver.??? I think the original 1.0 really hit the sweet spot being not quite as big as et48 and bit bigger than this one...

[@superfabian143]

I hope they do!!! I’m eager to buy an 1:8 Mt

[@backlashD]

How much does it weigh fully loaded? Will a Mamba X for in?

[@Airbrushkid]

Where’s the top brace?

[@NorthernRC]

This or a outcast or kraton 2.5 any thoughts

[@tyrellcorp2118]

Thanks for the review, it definitely addresses some things I mentioned in an earlier video. I am starting to recognize this is intended to be a smaller scale vehicle than the original. But I have seen others running on MX28's and they seem more appropriate, especially since this is supposed to be a stunt/monster truck. Cushier tires may also help with those broken shock pistons. ;D With SC tires, is there ANYTHING to distinguish this from the SCT? Wider arms probably. I'm trying to decide whether this is my next RC or if I should pick up the original MT410. I held off, despite the price drop, because I suspected the MT410 2.0 was coming. I'm going to wait for more videos. Someone will eventually try Badland 3.8's or Backflip LP's, or at least really send it with 2.8's on 4s. (Next video please?) YES, they should release an MT48!

[@ma-t6949]

I wonder if my 16mm pro mt4x4 shocks will fit it

[@Gerar79]

It seems expensive to me within the competition it has. In Spain and the rest of Europe it exceeds €500, I have found it at €529 in Spain, in Germany with transport €519, Austria with transport €525. Add a Hobbywing electronics, servos and cheap radio station and you're at €750. For a very expensive Monster 1/10, my Hobao MTX 1/7 cost me the same and most of its alternatives are over €500, the most expensive being the Traxxas Maxx €650. I find it very expensive although exclusive and quality.

[@Jaguar-s7f]

As nice as this car is, this car makes no sense from a marketing perspective. It’s a 1/10 scale basher priced exactly the same as the old 1.0 car that had 1/8 arms, shocks and hexes and a 7075 chassis.

[@MarkJohnMorris]

Is it an Arrma Big Rock shell?

[@jozy5154]

I wish they made the RTR. I built 2 kits before. I just don’t want to do anymore

[@m2cracing168]

Thanks for the awesome review! M2C to the rescue!

[@smart3k]

I wish parts were easier to get for Tekno in the UK, Would love one of these

[@Skynet5UK]

Rprc? Fantastic tekno support.

[@PSF_RC-PatSmageFilms]

I just want the driveshafts in my mt converted sct410.3! Too bad they don't fit because that is the biggest weak point I have had with putting big tires on that truck.

[@Jaguar-s7f]

2-3x the cost of an MT10. That’s a tough pill to swallow.

[@RUZTY1311]

Do you not know Tekno? 😅

[@Jaguar-s7f]

⁠@@RUZTY1311I’ve got the MT410 1.0. It dwarfs this thing. That car was competing against 4-6S cars so the $700-800 entry price was at least justifiable. For a 1/10 scale basher, the value proposition just isn’t there for the 2.0, IMO. It doesn’t even have a 7075 chassis. Don’t get me wrong, it looks like an outstanding truck, but it’s a bit of a contradiction in terms.

[@RUZTY1311]

@@Jaguar-s7f Its the same price as the SCT410 2.0. Do you have issues with that truck as well? I also have the 1.0 and they're just two different trucks. The EB/ET 410s are also above $400 and you get less with those compared to the MT410 1.0 according to how you're looking at it 😉

[@Jaguar-s7f]

⁠@@RUZTY1311I’m just looking at the reality of the market place. The old 1.0 was competing against 4-6S Arrmas and the like, at least it was for me. Also, if a new MT480 kit is priced at $700 like the ET48, I don’t think it will sell like hotcakes either. The racer vs basher market are very distinct in my eyes.

[@RUZTY1311]

@hashimrahman51 You have to look at it beyond the price. What you get with Tekno is far superior over Arrma and a LOT of other brands. Arrmas 6s line is going for $699-749 so they arent too far off. Obviously you arent accounting for the rest of what you need to buy, but if you budget buy the electronics, you can finish at around 850-900 and have a much better truck than anything Arrma can release. I dont think a new MT48 would be above $600, but I guess we'll have to wait and see. If its going to be built around that same platform as the ET 2.0, well then maaaaybe haha

[@6spd85notch]

Nothing compares to the pro mt 4x4 imo. Proline should release a 2.0 version. 17mm 2.8 legitimate monster truck tires included, 550 motor compatible , awesome shocks and suspension, just an awesome piece of machinery. I haven’t come across anything that compares.

[@yefroy]

NOT THE ONLY ONE! THE PROLINE MT PRO READY TO 1/8 SCALE ELECT' SHAFTS.......

[@smiley37greg]

I assume Tekno created this model with mostly existing parts from other models. Allowing RC enthusiasts who like to build and personalize their builds. Obviously not to compete with Other companies RTR offerings. I enjoy building, tuning and moding my builds almost as much as I do driving.

[@Adubbs87]

I would really like to know what your thoughts are compared to the version one? That was by far one of my favorite bashers ever

[@RazorRC]

just very different trucks, apples to oranges now

[@Adubbs87]

@@RazorRC I completely agree. I don’t know it just feels weird not being anything like the original lol.

[@dub2536]

What in your opinion is the best 1/10 th scale RC Truck and or Truggy currently available that uses HEX screws and is 4S capable and uses only HEX parts? No phillips head screws. Great video. TY and have a happy new year.

[@RazorRC]

I think this is the only true 1/10 4S truck

[@dub2536]

ok cool. I am grateful for your content and response. I was impressed by that truck jumping and midair manueverability u displayerd. That is imo esential to be capable of reversing throttle midair etc to be capable of plotting out a safe landing, but some trucks have "dragbreaks" or just cant be manipulated in the air nearly as well. Excellent video and narration. TY, and have a happy new year! Cheers aka "Prost" o7!@@RazorRC

[@dub2536]

I plan to buy this one next year. If u know any link/URL might care to share please let me know. TY @@RazorRC

[@CBOBRUN]

I want one! Great video and review, tekno is awesome and make high quality rc vehicles. My AE MT10 is amazing and still one of my favorite monster trucks to drive.I wonder how this truck would compare to MT10, stampede, granite all driving back to back in same video would be awsome. I like your videos and find your razor tuning videos helpful and helped me set up a few of my rc cars, thanks.

[@RazorRC]

For sure I need to do an updated 1/10 MT comparison

[@tyrellcorp2118]

@@RazorRC When considering price, Granite still wins ;D

[@BeardRubEnjoyer]

Fantastic review, much appreciated. To me this is a real knock against the brand. Seems like less truck for the same price. Ultimately I guess track performance is what matters, but I have to wonder why the price didn't drop with the scale of the components.

[@RUZTY1311]

Its the same price as the SCT410 2.0. Do you have the same price complaint for that one as well? Thing is, EVERYTHING went up in price due to inflation, so it is what it is 😅

[@Jaguar-s7f]

@@RUZTY1311the problem is this new truck isn’t competing against the Kraton 6s or even 4s. It’s about the same size as an MT10 and a Granite. I agree inflation is 100% a real thing, but the fact is you can still get a brand new MT10 for $330. Also, it is pretty disappointing that the new 1.0 chassis is 6061 and not 7075 like the 1.0 chassis and that you have to buy the tower to tower brace as an option.

[@Jaguar-s7f]

I am pretty sure the chassis is 6061.

[@RazorRC]

thanks, I think you're right, no mention of 7075 now that I looked more closely

[@RcPlayer-tt2vw]

This truck drives how I try to get my Arrmas to perform .

[@longboardguy]

I love Arrma but once I had driven a Tekno it is hard to match the driving performance with any rtr 😅.

[@RUZTY1311]

I sold all of my Arrmas after buying my first Tekno lol And it was the MT410 1.0 that was my first build 😂

[@Shadows-RC]

You'd think Tekno would learn from Proline's overpriced and discontinued 1/10th MT failure. I don't think they're going to sell enough of these.

[@kylem.4000]

They've guaranteed everyone who had a proline MT buying one at least

[@rcjoe406]

Cool 😎

[@timg9404]

Your body posts are mixed up

[@anitalongass4720]

Yeahhh I don’t know what Tekno was thinking with this lol. So this is a shittier version of the tank they came out with initially. Good thing my 1.0 can’t break.

[@samw2768]

You compared a top of the line kit to traxxas plastic garbage 😂😂😂.

[@RazorRC]

In size

[@BMfins]

No body included with the kit or aftermarket that are made specifically for this vehicle really turns me off on this vehicle. Yes I’m petty.

[@RcPlayer-tt2vw]

So you’re attracted to a RC weird “ 😂

[@RUZTY1311]

So you dont know Tekno then? It doesnt need a huge aftermarket like other brands do because they just dont need it lol Plus, its brand new. Eventually once enough people get bashing with it and find its weak points the aftermarket will do something. The only thing I would say it needs is 16mm shocks if you plan to jump big and the bumper "hoops" break too easily. I love mine so far!

[@Hoosierdaddyjones812]

4 ads and halfway thru

[@jbrc1322]

go premium- no ads and get music, too

[@bustedaw11]

I'm 13 in and have only had 1 😂

[@barbedwirerat661]

Premium 1/10 MT for sure. Maybe a niche market but some folks do want that premium build in a more compact size. The Traxxas, Arrma, and TA options have a less refined more entry level feel in either regular 1/10 size or lets call it 1/10 XL for the 4S trucks. Tekno needs to revise those those shocks though. Pistons breaking on larger but perhaps not super extreme jumps isn't a good look for a premium truck especially if the entry level trucks can handle it!

[@Jaguar-s7f]

It’s too much money for a 1/10 basher IMO. The 1.0 was competing against 4s and 6s 1/8 cars and you could justify the $700-800 price of entry. Not in this case.