My workshop is my sanctuary in more ways than one, too 😶🌫️😌
@maxxm.1083 жыл бұрын
Interesting smoke generator 😉🤣 A propeller dyno would be nice ... Some small aquarium closed from the top, a strut mounted to a strain gauge beam or some tilt force sensor, motor and ESC with data logging (current, voltage drop, temperature). I think castle has an esc on offer for speedruners. You would have some point of reference without leaving the workshop 🤔
@alainbellemare21689 ай бұрын
Water tankwith cake dye
@vincentrocco85233 жыл бұрын
yeah buddy buzzing the rc 's
@power211006 ай бұрын
Puff puff puuuuuuuffffff
@Dokroc783 жыл бұрын
Got my Blackjack, got electronics on the way from OSE. Boatgang! Boatgang!
@IRONCLADRC3 жыл бұрын
NICE! boat Gang! 🛥 Brother in Boats!
@Captaraknospider6 ай бұрын
@IRONCLADRC I have a proboat formula fastech its got a plastic prop do you think changingbto stainless will be to hard on the flex shaft?
@Sweetaccord3 жыл бұрын
Nice video. My other tip is to "polish balance" the prop not file balance. A high effecient prop with a glass polished prop, and a fast prop is a slippery prop. When you can see you face reflected off the prop you have it polished well. 😊
@IRONCLADRC3 жыл бұрын
Thank you sir, Wish I had the time to polish one up like that. It took a week to get that prop where it's at now. Haha. Hope you didn't mind me using your phrase "black art" you kinda hit the nail on the head with that one. Thanks for watching.
@Sweetaccord3 жыл бұрын
@@IRONCLADRC Hey, no problem. I enjoyed the video and all your work in making them. It's not hard to polish, do it with a Dremel and polish wheel. If you do it evenly you can keep the balance close. It's the ultimate way to balance to perfection. I like the smoke idea. Get a small fan and put in front of the prop to keep it spinning and all you have to do is get the smoke going. Even an insence stick would work. 😊
@DandSCreations Жыл бұрын
@@IRONCLADRCpolishing is extremely quick and easy with a Dremel flapper wheel kit.
@magercboat32403 жыл бұрын
nice video,, like it very much,,
@MrJob913 жыл бұрын
awesome video ty
@LandenDenham3 жыл бұрын
You do a lot of boat videos
@IRONCLADRC3 жыл бұрын
Yeah I do I'm kinda fed up with my RC trucks breaking every Other time I take them out.. POS arrma parts add up
@LandenDenham3 жыл бұрын
@@IRONCLADRC that sucks, but don't you have an xmaxx? Those are pretty bulletproof
@IRONCLADRC3 жыл бұрын
Yeah I do have an X Maxx and it's actually tough as nails and my 6s kraton is tough as nails too. I've been big into boats lately that's all I can think about you know what I mean
@LandenDenham3 жыл бұрын
@@IRONCLADRC yeah, I understand, I'm building a 4s latrax rally and that's all I can think about
@macdexter74543 жыл бұрын
Bro can u tech me how to calibration ztw shark 40a.. My problem after calibration, stick maximum throttle then release to nuteral position the motor spin to much..
@Captaraknospider6 ай бұрын
I have a proboat formula fastech its got a plastic prop do you think changingbto stainless will be to hard on the flex shaft??
@IRONCLADRC6 ай бұрын
Stainless or brass would actually be better than plastic on the flex cable, you can sharpen the blades of a brass prop so less drag & load on the driveline
@jonathandemaria18653 жыл бұрын
Silver solder 56% and white flux is what you need. im in the process of learning how to do .187 cables. The tricky part is getting it brazed without any wobble in it😎😎
@IRONCLADRC3 жыл бұрын
I just tried jb weld on a .150 cable lol. I'm curious to see how long it last. Ha. Good luck with the .187 brother