Rc car first drive after finishing

[@gilesnewman9845]

Excellent build! I really admire your design and the quality of the fabrication.

[@brandonsmisek]

I will admit it does look a bit cab forward but a lot of futuristic vehicles do as well. The workmanship on this is amazing. Very well done Sir.

[@mailmanx69]

I LOVE large scale RC cars! That is a really nice piece of custom fabrication. Excellent first run! I can see that this car has a lot of potential. Given time, you can get all of that potential out of it.

[@rep11661]

Looks like you assembled from a kit clean and professional hats off!!

[@wildgoobsid5]

Nice piece of RC engineering. Cool project and you have the absolute coolest accent on KZbin. Good job and nice video.

[@cotoje01]

Svaka Cast Ante Legendo, skonto sam po Dialektu da si sa nasih Krajeva, samo Napred, Zivio

[@RICHIE_RICH89]

Alot better than most home made rc cars

[@carloscastrojr6410]

Dude...That is BADASS!! Was just looking at those little 4 wheelers for my friends little girl.EXCELLENT job with the steering!!!

[@vancemacd6315]

I'm quite impressed fellas. Nice work

[@lyomon9981]

the sound blew me away ... jaw droppin

[@barirwin8559]

very nice work, lads. cool idea to use the servo for two jobs,brakes and accelerate

[@thebeastfromthesoutheast7765]

that's a sick rc car bro. Looks indestructible

[@Dlive2005]

That shocks is crazy man wow looks like a 2500dollar build nice car

[@DoRC]

This is very well put together! One question: why the complicated custom steering drive instead of just using a big servo?

[@staysleepn]

That truck is awesome . Just needs some LED's and a spoiler and it would be awesome. Nice truck.

[@mygt8a4re]

Put on a seat, foot pegs, some oh sh!t grab handles and hop on it, lol. Really cool build!

[@cnnlt200]

Very nice job. Respect for the engeneering

[@mattmilton3]

Super cool and clean! Good job on the build 👌🏿

[@Dr.Stein99]

That is nice and quiet. I would get 10-15 minutes play time before the cops show up to hand me a stack of tickets.

[@wooty8721]

its cool and i appreciate the effort gone into building something like that, but i wouldn't ever want one personally.

[@modelleg]

Looks like the thing understeers a bit...very cool!

[@daveatkinson4774]

Just needs a seat :) Awesome work!

[@fishnhunt2187]

Little bit bigger and u could give ur friends rides...!!!! good job much love from Seattle WA!!

[@pozdrofrompoland]

very nice one, it's look very solid and elaborated...

[@silverstake88]

Fabulous work! 👍👍😁👍👍

[@Reburned32]

Looks good quality build.

[@pauls5745]

sweet! very clean build

[@robertlizardi9544]

By the looks of it it looks like a quad without a seat, body panels, and handlebars

[@kevslife]

Robert Lizardi its exactly that but with go-kart wheels and rc gear

[@stuwest3653]

IT'S COMPLETELY CUSTOM.

[@steakandchips9046]

Stu West NO idiot ! 🙄

[@TV-gq5dd]

вот это дело уровень уже хоть какоето совершенство получили всё надёжно, мощно, капитально и ломаться не будет, как пластиковые модели 1\5 молодцы!!!

[@marsbase3729]

awesome build!

[@thondupandrugtsang]

Wow! That is one awesome RC car.

[@rickyracer8717]

Neat work, but what always surprises me with these builds is that nobody every builds in a differential! That solid rear axle does nothing to stop the vehicle from spinning out all the time!

[@1minibean]

Sweet job. Looks great

[@mickg5196]

The Sound is very nice👍👍👍

[@RcNickster709]

Awesome guys!!! Man that thing is killer. Great job. Big thumbs up from me and subbed to stay tuned in.. :)

[@jmadd9000]

wiper motor for a steering servo! you are a genius! love the video

[@carlgar2007]

That's awesome . great job guys. Love it

[@AlansRC_World]

Wow, that looks awesome!! How long did it take you to build that 1/6th scale RC Car? That motor sounds sick!! Have you done a speed test on that yet??

[@maxmorgan2297]

very good job:) would love to see it offroad with bigger wheels. and maybe other gearing:)

[@ugniusbl.6467]

Very cool, very good job👍

[@Itsahardknocklife9690]

That is awesome 😎 well done

[@5C077Y5]

Very cool, good job! ... Can you give it a longer gear ratio? Or maybe fit a working gearbox? ☺

[@rc18trocks]

scott mann when he went over and clicked the thing down after reving it. He actually put the transmission into first gear. It has four. Don't know why he used first only. This motor is very common in Chinese pit bikes

[@nicov.2151]

yeah he could used a 20kg rc servo on a third channel to manually switch the gear. Or he could switch it into third gear, and drive around with that. However the extra servo option is better..:-)

[@PetrincicBrosRC]

The sound is just great. Great. Oh yeah... Thanks for sharing and greetings from Slovenia, Pilot Robert

[@OneCleans13]

that backfire is great!

[@markking5782]

looks like its made from a pocket bike -- nice job

[@everettbyars9727]

Good job man ..need to do a 4x4 crawler

[@CyrusNazarian]

Clamp a small bucket seat onto it and take your niece/nephew for a ride = ultimate uncle status!

[@nashanya4262]

Sounds like a dirt bike ☺️🤤✌️

[@miguelcolon3966]

It looks like it's backwards.

[@Navaja09]

Miguel Colon how wtf?

[@adelmehdi6174]

no its manuel transmission so its just the 1se gear

[@tyler-uw4yk]

I was thinking the same thing the roll cage should be in the back

[@stpbasss3773]

Sebastian Nava the body looks like it's on backwards idiot

[@omotolaoyeniyi631]

Looks more like a small truck

[@Voltaic]

Nice Project! I also do have a tipp for you how to not have the front wheels slide in corners.. the attachment points from the steering rods at the wheels have to be in an triange with the middle of the back axis and the 2 turning axis of the front wheels(the vertical ones)! Then the inner wheel turns more then the outer since the inner turning cycle is a smaller then the outer turning cycle!

[@Voltaic]

better said: they need to be on the line betwheen the middle axis point and the front steering axis:)

[@xibidit]

cvt motor and muffler!!! so cool man

[@darioblaca]

svaka cast profesore

[@bitemykrank1970]

I don't understand the first 2:30, I can only speak English, my bad, but when it runs....it sounds great, and I want that muffler ( or lack of ) on my 30cc Yak, that backfire on overrun is AWESOME.....I LOVE IT !!! It does look like it's got TOO MUCH power though, it ground loops very quickly, maybe on big chunky tires and loose sand or dirt, it might be OK, but still a handful..........of fun

[@filipgd123]

Looks great !

[@MrCocoawesome]

wow dude your are awesome. you are destined to reach places XD

[@nimbuslayer5142]

@ 1:06, where is the oil dip stick? Running that around in the dirt would toast that engine pretty quick. Don't be a dipstick, put that dip stick back in that gaping hole!

[@jrwill58]

No dude I think your wrong. At first it looks like that but if you go to 1:00 you see where the hole to the Crankcase is. That other side iswhere the sprocket is so that may be where the timing mark is on the flywheel ? BUTT- I could be wrong too. You are right about dirt getting down that hole, where ever it goes to, Im sure dirt isnt needed in there. ;-)

[@a.j.sgarage9637]

Actually. These 110 cc Chinese engines come with controllable governors. You can govern them all the way down to do 1-3mph. And if you take them out they are capable of much more.

[@MrVbkb]

dude sorry but your wrong thats the fly wheel with electronics if there is oil in there the engine wouldnt run, dip stick is on the other side, its actually a pit bike (thumpstar) engine

[@kollak01]

dipstick hole is on the other side at 1:00

[@MrVbkb]

most of you people know f**k all about engines do some research, the oppisite side of the sprocket is the dip stick, the hole on the right side of the engine is the timing light hole or inspection hole, down in there is the flywheel and electronics/magento if there was oil in there the engine would start

[@DoRC]

It would be awesome to see a third channel setup that could operate the shifter!

[@dmanalang9037]

Its beautiful, nice work!

[@whyfpv773]

Best music!👌🔊💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💕💕💕💕💕💕💕💕💞💞💞💞💞💞

[@nunodias3331]

awsome work dude

[@W3BZSL1NG3R]

what would also be really cool is add the quad plastics back on it and get a lil doll or mini rider with racing suit and Helmet.. cya W3BZ

[@JohnSmith-ws6jg]

It sounds so cool!!

[@_Viking]

So much work, and you didn't use a motor with automatic transmission??

[@whyfpv773]

BEAUTIFUL👍

[@ubbe1089]

Awesome vids I love that sound. Thanks

[@gingermanc]

Looks brilliant btw :)

[@JessVideoDude]

Great job guys :-)

[@offroadrc110]

Wow! Nice work! Subbed.

[@robertcarter6307]

Outstanding!!!!what happens when you up shift to second the thing must be fast as hell of course it's gonna hurt some of that low end grunt but the top end dam probably get that thing up to some interesting speeds would like to see that in a upload!!! Hint hint what's it like doing that? Also for the fuel concern not that I think its a huge one just weld a little roof of sorts or like a little roll cage just around the cap area so if there ever was a roll over not be a issue!! End of the negative comments on that to! Been rc'ing for a lot of years and I think it's great!!! Good job just make sure you have some kind of fail safe on it I had 2 1/5th scales run off on me ugh!!! Pricey!!! What about tire swap for off road try that yet? Upload upload

[@baflabies]

wow what is that 1/3 scale? oO! Sick ride!

[@poolhallshark]

It looks kinda understeered ? Does it need more weight on the front tyres ?

[@P8FPV]

😁 very cool lads ✌👊

[@joylavy6052]

Nice work!!! 💪👊

[@SamTheRider]

wow incredible very nice bro

[@pauljs75]

Nice build. At that scale it should have an FPV cam.

[@mohamedzadhil7690]

Perfekt work Bro😎🔥🔥👌👌

[@collinallen5356]

need to add shifting mechanism. how much does something like that cost or would you sell for?

[@larrycutrone8552]

You need to mount a camera on this car! Very nice!

[@CMBProjects]

So cool! I'm making one with a 49cc engine😀

[@rcmaniac2018]

that's a small quad or dirt bike motor. at 2:37 he puts it in gear

[@timpos546]

I think it's from a Pit bike :)

[@jeffex72]

Take it off some cool jumps

[@patskey08]

nice work!! but try to put a scooter engine like a cvt trans. ))

[@fctryoffetsh39]

Nice job😃

[@Vodoi9x]

Can't you tell me about your tire you used for this one ?. And what servo you used. Thanks

[@ezziddeanjamal_7310]

That was amazing work

[@reecenamina]

Does your radio have a trim for the steering servo?

[@Linktw0]

this is so many levels of awesome

[@Steftina]

You have done a great job there but i was disappointed with the performance. I thought it was going to take off but it just chugged along. Maybe your still getting it sorted.

[@invincible.heilander]

Great job! Very very nice! :) Do you have a construction plan or something? Because I would like to build this similar to. :) how can i built this?

[@scarface-39]

Cool machine!!!!

[@DiamondBackDivision]

Nice build! I’d love to know more about your wiper motor steering conversion.

[@richardkimbrell8653]

Nice!! 😎👍

[@mrsaizo0000]

Is the transmission a CVT type?It's insane... 110cc... I like it!

[@W3BZSL1NG3R]

you need a 4 channel airplane radio and use and fill an air canister and add a motorcycle quick air shifter and with a transmitter you can also add remote start we made chevy blazer into a remote control car. we used the power Windows motor and track for the gas & brakes and steering with same window motor an track but added a pully system for it. was tons of fun.. so you can either use a power Window motor n track or power lock solenoid to be able to shift it on the go. also it looks like it could use some more weight. my 114mph Traxxas rustler I added 2 1/2 lbs to the front bumper cause it would flip over soooo easy well hope this helps and keep up the great work as always Keep RCING CYA, W3BZ

[@stpbasss3773]

webslingercj rc expert

[@Brucechang0518]

Does your steering servo is a few kilograms?

[@sutphinboy]

Yoo that shit is dope my dude great work on that 1

[@chrismechanic2000]

nice work guys, awesome

[@mickg5196]

Super 👍👍👍👍😁

[@megadeth1952]

Does it turn left as good as right. Its looked like left turn was wide

[@fctryoffetsh39]

Man nice work