RC plane BACKWARDS setup - Blheli ESC l S-DiY

Warning : After setting the two-way mode, it will not be possible to return to the original mode! Please consider when doing!
Hi guys welcome back to my channel
-Today, I will install with you guys REVERSE THRUST RC PLANE WITH Blheli ESC
-Install based on hidden feature on ESC Emax Blheli 40a
-Attention, the instructions in the video are only effective with a certain batch of ESCs, and may damage your components, think twice before you start!
-ESC : bit.ly/3JvlzCU
-Instruction manual : bit.ly/36h3Lgo
Looking forward to your reception, if there are mistakes, please leave a comment!
Information : [e-mail]
All video copyright in this video belongs to S-DiY channel. Please do not reup on any platform !

[@SDiYchannel01]

👉Các bạn CHÚ Ý, khi chuyển sang chế độ 2 chiều thì không thể khôi phục lại như ban đầu bằng TX. Việc đảo chiều gấp có thể làm hỏng linh kiện ! Cám ơn các bạn đã xem video ! WARING , when switching to 2-way mode, it cannot be restored to the original by TX. Folding reversal can damage components ! ( sorry, i use google translate )

[@blackking7341]

LoL 😂😂😂😂

[@hpquanghpquang]

Mình cài đặt bị cái mức throttle thấp, giờ chạy nó chỉ nhích nhích thôi, giờ có cách nào để config lại ko ad? Cứu cứu 😢

[@SDiYchannel01]

@@hpquanghpquang bạn đã vào chế độ hai chiều chưa?

[@hpquanghpquang]

@@SDiYchannel01 vào chế độ 2 chiều rồi ạ, chỉ là cái ngưỡng điều khiển nó nhỏ quá hay sao ấy

[@hpquanghpquang]

@@SDiYchannel01nhưng giờ ko vào đc setting mode nữa

[@bobisyouruncle1]

Nice. You should set the ESC 'brake' on. That way, the motor stops instantly when moving throttle to minimum.

[@bransonclayton]

Thank you for going thru the steps on your flysky. I also use a i6x and try to keep some of my projects as cheap as possible.

[@SDiYchannel01]

Thank you so much!

[@chuongaming1823]

Vừa thay thế cho flap vừa là phanh khẩn cấp luôn thật hữu ích

[@redair_fpv]

Nhưng mà đổi chiều nhanh quá dễ mất lái lắm

[@lucywucyyy]

if id known reverse thrust was as simple as a choice of esc i wouldve done this, definitely will in the future

[@CraftChannelYT]

great project. i love this channel

[@SDiYchannel01]

Thank you !

[@nhutphat]

Xem lại cảnh quay thật chuyên nghiệp…

[@funtoytoyschannel5676]

Beautiful plane that you playing friend

[@widyasutomo]

Mantap sekali...saya suka👍

[@suji99hettiarachchi]

Hi s diy can you please make a video about how to programme the xk k110 helicopter ESC please

[@thientranphuoc9707]

How to setup REVERSE THRUST rc plane - Blheli ESC voi tx devo7 được không?

[@SDiYchannel01]

Hi anh, Với devo 7 thì a chỉ có thể set cho esc blheli vào chế độ đảo chiều, sau đó khi bay phải để cần ga giữa. Còn set throttle curve để đảo chiều bằng cách gạt nút thì rất phức tạp nhé !

[@user-cu7oq4vz2p]

Возможно проще установить винт изменяемого шага? И для двигателя безопаснее и эффективнее 😉 Я даже двс видел с подобными системами. Реакция, эффективность, да всё - лучше. И если правильно сделать, то не менее надёжно!

[@maircvlog1202]

Sân tân bình đay mà kk sao chưa từng gặp a bay ta

[@deadeyejones6403]

Thank you so much for your help!

[@StefanNaewe]

Interesting. I'll use that for a swamp boat. Thx.

[@SDiYchannel01]

thank you. It is very suitable for swamp boat, airboats...

[@bambangsupriyanto9412]

Thanks for Information 👍🏻

[@jamesmclane2826]

Really awesome video thanks for doing it

[@AKElectroTech]

If you have flysky i6x then why you use microzone transmitter. Isn't flysky better?

[@SDiYchannel01]

Thank you. Mc6c I use in the video for newbies. The only advantage is that it's cheap and easy to use!

[@duonglan3347]

ad ơi e có esc giống vậy mà cứ ga 80% là nó tự ngắt vì lí do gì ạ, có phải esc này chỉ dành cho motor tua thấp ko ạ

[@SDiYchannel01]

Hi bạn, cũng có nhiều cặp esc motor bị ngắt rồi reset ở tua cao. Thường là do timing esc chưa hợp với motor, nên bạn hãy thử set lại timing esc. Hoặc do 1 trong 3 jack motor tiếp xúc ko tốt, lên tua cao dòng cao bị ngắt!

[@docwunder1628]

Cool.i habe the same skylark in green and a 40 bidirectional esc. Lol.👍😁🙏

[@SDiYchannel01]

Thanks, interesting coincidence!

[@tomazdornik3603]

How to enter programing mode again now from bidirectional mode

[@aeromodelismofuraventos42]

Before set the reverse mode set the throttle range. It is imposible after.

[@arabdullah3977]

How do I go back to normal mode?

[@user-zc3gm4jx5h]

Why are you not using BLHeli Suite to configure your ESC ? It is a BLHeli ESC, so it so BLHeli Suite can configure your ESC in Windows OS between bidirectional and unidirectional. It is also a solution for commenters here who are now stuck in bidirectional mode, thanks to it you can go back to unidirectional mode.

[@hpquanghpquang]

Hello, I do something wrong and now I can not enter the setting mode. Do you have any idea for this? Can I use blheli suite to restore factory?

[@tomazdornik3603]

Or how to to do factory reset now.tnx

[@jcalmar74]

Hello My friend what motor do u have on the airplane? I have the same plane but I can't found the motor. Ty 4 all ur videos have a nice day!

[@SDiYchannel01]

Hi friend. I use motor 2216 1000kv, or 2216 980kv.. It doesn't come with model, you can find it on banggood !

[@jcalmar74]

Thank u so much!

[@terjeoseberg990]

I thought you were going to fly it backwards.

[@jcalmar74]

Hello again My friend . Can you do a video how to install the motor please? Thank you

[@SDiYchannel01]

Hi, sorry I didn't film while assembling the motor, but that's okay, I saw a friend on the channel "Joyplanes RC" showing very detailed how to assemble this kit, you can refer to it !

[@jcalmar74]

@@SDiYchannel01 ok Ty so much!

[@maircvlog1202]

A cho e hỏi Cg con f3a này ở đâu a

[@SDiYchannel01]

Hi bạn, CG nó ngay chỗ thanh carbon cánh lên tầm 1-2cm nha !

[@maircvlog1202]

@@SDiYchannel01 dạ cảm ơn a nhiều ạ

[@lungomaburfpv1425]

Hello, how to programming from Bidirectional back to Normal ?

[@cuongnguyen-xs1yz]

Có cách nào để esc trở về lại như ban đầu không ạ

[@SDiYchannel01]

Hi bạn, đề chuyển về mặc định cần phải qua mạch trung gian, bạn seach thêm " flash blheli with arduino" nhé !

[@mauriciohuerta7925]

Hermoso😅

[@shahram677]

I followed all you mentioned and it worked BUT when I switch throttle hold or turn transmitter off ,motor will start working!!! Do u know how to fix it? It’s very unsafe and dangerous Btw my tx is ix14

[@ebeahimebrahimmohamed9014]

Did this work in any broshles motor

[@shoaibzafar4431]

Plz about how to ESC normal mode after bidirtional mode

[@SDiYchannel01]

I'm very sorry, can't get back to normal with the transmitter, this I noted in the comment pin, maybe you didn't find ! If it bothers me, I apologize on my own!

[@rafael1982sa]

Hi, Man. I have one Microzone like you and did put birecional settings in both Escs like yours, but now a can't reset factory settings or do another configurations. A put The throttle in top position, but the esc always start normal.

[@SDiYchannel01]

Hi, unfortunately it is not possible to go back to the default with TX. I suggested it in the pinned comments and the video description. My mistake was not taking notes directly in the video. Sorry for the inconvenience!

[@rafael1982sa]

@@SDiYchannel01, ok, thank you, i will try any solution like using arduino because one esc is normal and works fine in birecional but the other i think it was necessary a reset factory before programming.

[@SDiYchannel01]

@@rafael1982sa Hi friend, connecting Blheli via arduino, and setting all parameters is possible and easy if you know about it. I tried, full instructions are in the manual of Blheli suite software. Good luck!

[@rafael1982sa]

@@SDiYchannel01, i did. Could reset factory by arduino but a think this esc really damage because continuous the first issues.

[@ekowahyudi-iw7nk]

How to seting idle trotle make 9xr ?

[@borneorcfilm]

front rear breke?