Im looking 2 build a rescue boat Yours is awesome. I don't think I will be able 2 make one as cool as yours. Nice job
@PsychoticBovine12 жыл бұрын
I had thought of building one, but use an inexpensive EDF on a swivel for power and steering. The idea of having above the water air plane props so they don't get fouled is an awesome idea! I plan on building mine out of just 2 inch foam board with a V cut in it to catch the rescued boat.
@844784973975815 жыл бұрын
Very Nice Boat. i bet the barge comes in handy a lot
@allyouneedis4x412 жыл бұрын
Rescure boat looks better than the speed boat:) Very nice!
@gunnerneikoify11 жыл бұрын
Very nice my friends. Flashing red light on the back is a nice added touch.
@VampyreLegion12 жыл бұрын
Wow, nice... I use an air boat, but I like this much better, I guess I now have a new project. nice work, I like the rescue lights, nice touch.
@shartsandbagels12 жыл бұрын
Nice idea , I'm making a rescue boat out of a cheap 25 sea arrow boat from wal mart , gonna make foam arms on it to extend it but a arrow already has that shape but i dont run in weeds often but if they both get stuck , then swim time , but i'm doin that now anyways
@philldownes86852 жыл бұрын
Very very nice rescue craft
@jjdedrick15 жыл бұрын
Thank you very much for your comment, I have your SN555 wireless video camera along with your 500mW 2.4 GHz transmitter on board and I'm totally impressed with this wireless video systems! No flickers No blackouts and it is as clear as a bell.
@jordanmoller441811 жыл бұрын
Very elegant solution! I am thinking of converting one of my lower-power speed boats to something like this, just in case.
@mariodinkov43159 жыл бұрын
Very nice work. Now i am planing to make one rescue too.
@Wildonechad6912 жыл бұрын
Great idea. The guy talking sounds like the dad from American Pie lol
@nickspencer826310 жыл бұрын
nicely done Jim, very nifty idea.
@HistoricSteamTV7 жыл бұрын
Wow well done! I have been FPV boating a bit too. Goggles make it real fun.
@MachineElf12 жыл бұрын
And totally uneffected by weed I'm guessing cos of no rudders hanging down. Very innovative.
@HanaleiSurfrider111 жыл бұрын
pretty cool, for RC Boat operation on a Lake or Pond. Nicely done!
@stevelacombe98169 жыл бұрын
Nice work there!
@MustangFastback12 жыл бұрын
SWEET rescue boat!
@kennyg709411 жыл бұрын
20 years ago when Iwas running my air boat I would use a fishing pole with a heavy sinker cast over the boat and drape the line over the boat thus pulling it in sometimes a couple of trys depending on the wind
@jjdedrick14 жыл бұрын
@heathdspain The problem with using nitro or gas motors there is no reverse, I use forward and reverse and variable speed of each engine to steer and maneuver the barge.
@minhtranthong13 жыл бұрын
Good rescure boat!
@mudguyRC11 жыл бұрын
Well done!!! I use a kayak but your rescue boat is brilliant!
@Redbeard420698 жыл бұрын
Love the barge, but LOVE the narration! The only thing better than loving a hobby is having someone to share it with. I'm subscribing now in hopes of finding more videos with similar narratives. Great build! By the terminology used and the design of the barge, is it safe to assume one or both of you are engineers? Thanks very much for uploading this video!
@TheLipito8612 жыл бұрын
hell yeah man i wish i had tough about that when my baby sunk and 1500 dollars sunk with it
@boygofastboys12 жыл бұрын
it seems to me like it could be a bit more responsive to turning.maby like some rudders
@jjdedrick12 жыл бұрын
Thank You.
@chadclan12 жыл бұрын
Awesome! Thanks for the inspiration! I'm going to have fun making my own :-)
@Luvtoflyhelis8 жыл бұрын
Very nice my friend, great build
@BIGTUBEDAVE3114 жыл бұрын
its great you should make lots and sell them i would buy one
@tuan-anhnghiem43448 жыл бұрын
This is awesome, you are very smart. I like it
@justkiddin0814 жыл бұрын
Thats awesome good job!
@Benagiser12 жыл бұрын
Brilliant.
@oojimmyflip12 жыл бұрын
May I suggest a couple of aircraft floats instead of pipes and lagging which may allow a bit less drag moving forward, I am building one similar after seeing this video I'm not knocking the idead it is brilliant just thought maybe some floats might offer less drag.
@KevinMillard6811 жыл бұрын
nice job
@2SkyKing12 жыл бұрын
Would it be possible to get some detailed pictures, and maybe a list of all the equiptment you used?
@ptcommander114 жыл бұрын
That's what you call American Can Do...lol. Nice job PT COMMANDER 1
@2manytoyz12314 жыл бұрын
Weeds in the water clog outboard props, so this is exactly what I need to recover our RC airboats. I'd also really like to know about the mixer/speed controllers used with your setup. Appreciate any details you could share! Thanks!
@bcagg2511 жыл бұрын
That's awesome!!!!
@wickedstuffy14 жыл бұрын
This was just perfect. Right up my ally. Would it be possible to get some detailed pictures, and maybe a list of all the equiptment you used? Again, just an awesome job making this rescue boat! btw, you have to remember to use locktite on those grub screws that's holding that pin :)
@jjdedrick15 жыл бұрын
Thank you for the comment! As far as you building one don't say I don't think I can "Say I think I can and will build one" you can do anything you make your mind up to doing. Looking forward to seeing yours on youtube in the future let me know when you do.
@jjdedrick15 жыл бұрын
It sure does! I had to use it quite a few times this last summer, Plus it's fun to run at the same time, Thanks for your comment.
@wickedstuffy14 жыл бұрын
This was just perfect. Right up my ally. Would it be possible to get some detailed pictures, and maybe a list of all the equiptment you used? Again, just an awesome job making this rescue boat!
@jjdedrick12 жыл бұрын
Well let's see! I suppose you would have to do what you would do if you didn't have a rescue boat either swim for it or get a bigger boat and row out and get it. But I've been using this for 3 years and never once had to do that yet.
@iceman4636214 жыл бұрын
Nice grandpa
@bestamerica10 жыл бұрын
' good idea about a towing boat,,, i like that
@gunnerneikoify11 жыл бұрын
That's simple, rescue boat 2 now springs into action recovering rescue boat 1 and the original boat that was to be rescued in the first place.
@WILDDAGGERTV12 жыл бұрын
nice.
@crazycarl69696911 жыл бұрын
way to go jim!!! haha
@jjdedrick14 жыл бұрын
@justkiddin08 Thank you for the nice Comment!
@xXPrOsNiPeRGXx12 жыл бұрын
NICE! but what if that sinks?
@jjdedrick12 жыл бұрын
Sounds like a great idea, I like to see it when it done if you put it on KZbin please let me know. Jim D.
@fuadmrakovic841710 жыл бұрын
Can you give me plans and programming code? It is awesome.
@ChrisHamlett11 жыл бұрын
how did you connect the both motor to independant of each other
@1grinnbareit12 жыл бұрын
What's the problem with the speed boat, it's always being towed in! And would that barge work bringing in a dead float plane? We can use one of those sometimes! That's a cool rescue barge, good job? I hit "Like" :)
@jjdedrick14 жыл бұрын
@wickedstuffy I will send you some pics when we get back from vacation, we will be back Aug 10 th.
@eightlines1412 жыл бұрын
What Happens Of the Rescue Boat , Needs to be rescued?
@Starzz6214 жыл бұрын
Hey how did he get David letterman to be camera man? lol
@paulkazjack6 жыл бұрын
How does it fit in your car?
@budglass10 жыл бұрын
Amazing quality of craftsmanship in your recovery boat. How do you reverse the motors with a single TX? ESC's from RC car/truck? I'd love to make one similar.
@andrevschaijk10379 жыл бұрын
I'm guessing you are using reversing ESCs with vtail/delta mixing?
@tuan-anhnghiem43448 жыл бұрын
Would you please tell me where you buy all the parts? Thanks
@chriscanxp10 жыл бұрын
In the description, it mentions a wireless onboard camera. I didn't see that, did I miss it or was it just not on at the time ? Thanks ,, awesome recovery project you made !
@heathdspain14 жыл бұрын
@jjdedrick YES BUT IVE BEEN LOOKING AND CANT REALL FIND THE STUFF THAT I NEED WAS HOPING TO KEEP UNDER THE 200$ MARK WHERE DID YOU FIND YOUR MOTORS?
@mariodinkov43159 жыл бұрын
Very nice rescue boat. How did you manage to control and mix the two motors?
@Dentinhos311 жыл бұрын
How have u made the rescue boat?
@heathdspain14 жыл бұрын
hey im building one kinda simular to yours and im thinking about using two nitro airplane engines? any comments would be appreciated :)
@olly495013 жыл бұрын
Hi, what did you make the hull from?
@jirimar12 жыл бұрын
sounds like "evil" Dave Letteman :-P
@sixgunjustice900010 жыл бұрын
Is David Letterman your camera man?
@jirimar11 жыл бұрын
David Letterman?
@oceanviewlaundromat29837 жыл бұрын
like a German built machine.
@TurboLS4dr12 жыл бұрын
There's a 30 record board like 30-50 dollars and its faster a d lighter
@TheBoringProphet12 жыл бұрын
It looks like a scorpion
@Friskee6212 жыл бұрын
Another person that does not tape the canopy down.
@MrGimli214 жыл бұрын
@kellerb1717 y ai know you cant ;)
@arnoldaszlt12 жыл бұрын
super slow,but helpfull :)
@ИгорьКовальчук-ф5у10 жыл бұрын
Плавающая табуретка!!!!8-[ Сдуру можно и топор заставить плавать, но НАФИГА??????!!!!!
@nick19900912 жыл бұрын
so what happens when the rescue boat breaks down, chicken and egg anyone?.