Rc rollback wrecker tow truck

[@thercsniper1138]

As both a long time rc guy and tow truck driver....all I can say is......this is truly magnificent work my friend......now all you need is the scale customer bitching about the scale bill and the storage charges and it would be perfect...

[@michaelleehumble]

The RC Sniper lol thanks

[@luminositymusicbrianpricka6357]

The RC Sniper make some rollbacks. You could sell a hundred before the end of the year. I would buy two today. Nicely done. Mini-j hooks are so small.

[@komplexwithak714]

Nice to see other tow drivers! Safe driving from CT!

[@jamesburkes987]

As a tow company I think this is the best rc tow truck I have ever seen . You could make a fortune selling these and if I ever hit the lotto I'll be calling you . Would love to have it .great job

[@tracesayre6788]

im an accident recovery specialist in GA i clean up accidents daily. might i say sir, that is a text book perfect roll over. no need to move the truck just snatch block pull release block and drag er up

[@michaelleehumble]

Thank you

[@michaelleehumble]

Wreckmaster trained

[@allaspectsrc4178]

This has to be the most detailed rc tow truck I've seen built from scratch very nice job man

[@michaelleehumble]

Thank you

[@squaley98]

I about choked from laughing when the cop pulled up!!🤣. Great Video!

[@Dinnerbone-yq2gn]

The rc police car is a chevy camaro which results with Sergeant Bumblebee. 🚓🐝👮

[@LittleJohnAB1]

Awesome tilt deck, nicely detailed. I like how you used the snatch-block to right the pickup :D

[@michaelleehumble]

thanks

[@AndrewPolulak7181]

Jonathan G love your shows I watch them every time I get a chance to

[@AndrewPolulak7181]

I love cars & trucks all kinds of vehicles

[@towtruckaj]

A snatch block is typically how that is done.

[@WisJordan]

Being a former two car flat bed operator, who worked Wisconsin interstate for the sheriff department, I'd have to say you made it look like you've actually worked a real full size tow truck before. Using the snatch block and the flat beds position was dam near perfect. And lifting the pickup truck with the bed tilt to allow you to get the pickup truck squared to the tow trucks bed was spot on 👌 All things I've done a thousand times over the years I've towed. A lot of people are highly surprised at how much you can move / manipulate a vehicle with a snatch block and some chains anchored/pocketed to certain positions on your bed. Nice work and nice video 👍👍

[@lemonthardeman]

I would love to see the step-by-step process of building that Tow Truck, let me just say, that is a beautiful RC and my hats off to the craftsmanship of the build.

[@michaelleehumble]

thank you

[@christophermay9141]

I'm a rollback operator for Mike's Wrecker in Concord NC and that's really cool

[@michaelleehumble]

thanks

[@jthorner69]

The rollback looks freaking amazing!!!!

[@400exkid4]

I like how you use the rigging on the side of the tow truck so you don't have to push it with your hand it really did look realistic

[@michaelleehumble]

thanks

[@johnathanlyles6073]

best rc tow video I've seen! attention to detail is completely outstanding! the police car rolling up was awesome

[@michaelleehumble]

thank you

[@M.e.x]

Respect to this man still hearting comments after 5 years

[@almightymike322]

that's a really realistic tow truck my dad used to drive almost the same model

[@michaelleehumble]

thanks

[@rev59k]

Awesome build mate 😎 Epic

[@michaelleehumble]

Thanks

[@coasmechteranic]

2 years later. This is still cool as hell.

[@boneymaxfield]

Very well done and impressive!

[@michaelleehumble]

boneymaxfield thanks

[@neckbonz3152]

Nicely done Michael! Looks like you’re having fun!

[@michaelleehumble]

Neckbonz thanks

[@kevinmcgann9732]

your clearly a real tow truck operator.. cool video

[@michaelleehumble]

thanks

[@freeshavacado3959]

The most important thing I noticed in this video is that the e-brake was set and the wrecked truck didn't roll away. And these are RC trucks. Had this been real, we'd be watching another wrecker driver chasing a rolling away truck watching his job slip from his hands lol.

[@davidsgarage44]

Yooooo,the flatbed sounds real during startup,,awesomeeee

[@michaelleehumble]

david peirce thanks

[@coasmechteranic]

1.5M views!!! Hells yeah bud!!! Love this build.

[@michaelleehumble]

Jack Bias thanks

[@tim_A_turner]

great job with the tow truck... really like it

[@michaelleehumble]

thanks

[@nerdhobbies5865]

I would love to have one of these

[@hectorescobar7683]

Well made I like the roll back the most

[@blsedb]

I'm looking to build a 1/8 scale roll back, would love to talk more about how to pieced the electronics and mechanics of the bed. Turning an 8x8 crawler into a tow truck. Also love the sounds. Any help would be appreciated.

[@michaelleehumble]

There's pics on my Facebook page. I only do this for a hobby so I tend not to provide tech support

[@kenwileman6373]

I love how the cops showed up and the actual damage to the accident vehicle 🙃

[@HinchoRacing]

man that was sick i got a 6+6 im tryn for the bed to go down yours is amesing work great vid

[@michaelleehumble]

Hincho Racing Thanks

[@kens3164]

If you had remembered that glass shatters, the drivers window should be gone. Looks like a melted toy in this video. Follow realistic glass crack lines with an X-acto knife on the windshield. After that with the rest of the truck looking this good, it would look very real. Nice work.

[@michaelleehumble]

Ken Sutherland the windows are done with an exacto knife

[@Alan197730]

Real tow truck driver skills there. Nice job.

[@michaelleehumble]

thanks. I have wreckmaster training

[@علياالشهري-ب5غ]

+Michael Blazer خانمناتتن

[@michaelleehumble]

english?

[@Alan197730]

It was!!

[@michaelleehumble]

+Chevy King I was referring to the other guys comment

[@enjsaze25]

As a tow flat bed driver I love this

[@johnnybrewer5741]

I enjoyed your video and it got me wondering on building one but need a figure out how the bed roller work. Do you have any more videos of your build. If not could you me in in the right direction.

[@michaelleehumble]

facebook.com/Blazers-Builds-652557841554561/

[@one10RC]

Love this truck; I really want to build a tow truck flatbed like this. Might have to shop for some parts to convert one of my Axial crawlers. hmmmm

[@ismaeldover268]

You should add a side puller with a separate winch and outriggers

[@madmooserc2394]

Fantastic build!

[@michaelleehumble]

thanks

[@ambervalentine5223]

+Michael Blazer ??

[@michaelleehumble]

Amber Mayle yes

[@brianellsworth7920]

great little snatch block

[@twisthiltz4779]

Sweet Wrecker, excellent build!

[@michaelleehumble]

B Hiltz thanks

[@glongSJK]

I keep waiting for real drivers to walk up, nice job

[@michaelleehumble]

thanks

[@OGRadGrow]

Awesome scale footage 👍🏾💯

[@antonr.4923]

That tow truck is awesome, loved how you used a wrecked ford lol

[@michaelleehumble]

thanks

[@توفيقالكليبي-ق9ج]

ييب

[@កំសានចិត្តអ្នក]

Michael Blazer

[@awsalainy7549]

توفيق ا

[@davidhenson7037]

Anton R. Ow

[@noeysfastrc3291]

Awesome truck, amazing built

[@michaelleehumble]

thanks

[@garyfreeman9]

Very cool footage thank you for sharing. New Sub.👍

[@michaelleehumble]

Thanks

[@marcandatti9037]

Aww amazing job, congratulations from México (y)

[@michaelleehumble]

Marc Andatti thank you

[@oshkosh850.]

awesome! nice build!

[@Tinsil88]

I hope the driver was ok

[@barthalmoobobthebarnereiei1318]

Simply astonishing! How do you find such tiny drivers?🤔

[@paulmcnamara16]

Awesomeness right there buddy!

[@michaelleehumble]

thanks

[@tonyvaldepenas8068]

+Michael Blazer were did you get that tow truck

[@michaelleehumble]

+Tony Valdepenas I scratch built it

[@tonyvaldepenas8068]

+Michael Blazer its a great tow truck

[@michaelleehumble]

+Tony Valdepenas thanks

[@prestonfrady8977]

badass work n video looked so real cop car was a added bonus!!!

[@michaelleehumble]

thanks

[@darrynseverin9151]

absolutely amazing job , speechless , thanks for sharing

[@michaelleehumble]

thank you

[@jamesmartinez2427]

HUGE FAN OF THIS

[@ismaeldover268]

You should contact the jerrdan company and have them make those and sell to the public

[@havoc5872]

You worked very hard and I like it

[@michaelleehumble]

thank you

[@barharborbasher249]

Awesome job Mike !!

[@michaelleehumble]

thanks

[@aheike35]

Holy shit 1.8 million views. Kick ass dude. I remember years ago being a member of mid mich crawlers on fb and seeing these builds. Is that page still a thing? Haven't been on for in a few years.

[@michaelleehumble]

Thanks. Yes its still there but not very active

[@jamesconnersr6428]

Hell YHEA snatch block and all love it that's as realistic as it gets fellers and ladies

[@timbarentine29]

where did you get the body from?

[@brianonthego]

That was awesome.

[@RattrapRC]

Awesome truck

[@michaelleehumble]

Thanks

[@quackzkustumz]

How much did this cost to building? Has to be in the thousands! Great work!

[@michaelleehumble]

I think I had 3-4k into it

[@melisareily6900]

4 years later it is cool

[@michaelleehumble]

Thanks

[@shawnhealey7952]

I need this in my life.. time now!!

[@whitfinks1007]

Stunning

[@mistycoffey6998]

I love this I am always dreaming of having one of these

[@michaelleehumble]

Misty Coffey thanks

[@mistycoffey6998]

Michael Blazer no problem

[@legaematsafu5960]

Michael Blazer where did u buy de tow truck

[@michaelleehumble]

legae Matsafu I built it

[@mkbandkzzz3213]

Cool video man

[@markcruiser]

Hello, nice flat bed. reminds me when my real Chevy needed a tow :) what is the scale of the international and where are they available, if still. other than that, AWESOME truck. would like to get more details on it. i'm myself a huuuuge RC guy, since more than 30 years. again, thanks for sharing your great idea

[@michaelleehumble]

it's 8th scale and the bodies are rare

[@michaelleehumble]

m.facebook.com/Blazers-Builds-652557841554561/

[@markcruiser]

thanks for your quick reply, 1/8 scale, a bid big for my 1/14 trucks and cars. gotta get a 3d printer :). keep up the good work, curious what comes next

[@michaelleehumble]

+markcruiser thanks

[@jbryanlegarcon31]

Greatest! ❤️❤️

[@towcat]

Where did you find a Durastar cab? I can't seem to find a part for it anywhere, or even a 3d model for a printer Also, it's good to finally see someone who knows how to run a rollback. Too many people just moving things and hoping it looks good

[@michaelleehumble]

It's the cab off a New Bright CXT 6th scale

[@towcat]

@@michaelleehumble Yeah but that means I have to buy a New Bright product and I don't know if I can stomache that

[@michaelleehumble]

Good luck finding one

[@towcat]

Seems like they're fetching high prices, bugger Thanks for replying, though!

[@outlaw_jay914]

I want that tow truck really bad

[@BushmanofYukon]

I remember this one on FB lol Pretty cool :o)

[@michaelleehumble]

Bushman RC thanks

[@14unthinkable]

Awesome work. !! Bad ass

[@michaelleehumble]

Fernando Basulto jr thanks

[@Bendover34891]

now I want one it's so cool my dad mite want one since he's a tow trucker nice tow truck

[@michaelleehumble]

Cale Bane thanks

[@Bendover34891]

Michael Blazer can I get one

[@michaelleehumble]

Cale Bane It's the only one of its kind that I scratch built and I only build for myself sorry

[@Bendover34891]

Michael Blazer oh its ok

[@saraspitefull32]

Wow love it excellent!!

[@michaelking3327]

i used to fly rc planes, what radio are you using? i used a futaba skysport 6a on a telemaster 40, with a OS 70 4 stroke engine.

[@michaelleehumble]

michael king dx8

[@ccLA08]

okn this is awesome. i had this same idea to scratch build a rollback wrecker. Im already waist deep in the build. already have my deck made. How did you get the bed to roll back and tilt? is it something you concocted with servos and sheaves, or is it something you were able to purchase whole (like from a rc semi truck or something)? Please advise as this is where Ive currently gotten stuck at

[@michaelleehumble]

Threaded rod and linear actuators

[@ccLA08]

@@michaelleehumble attached to a motor or winch servo?

[@michaelleehumble]

@@ccLA08 servo

[@ccLA08]

@@michaelleehumble does your actuator require a channel on your remote? or does it work in sequence/tandum with the rod?

[@michaelleehumble]

@@ccLA08 all independent channels

[@milesparks3014]

Wife: Get a life stop playing,with toys. Him: This is my life

[@mpumelelokaelo3337]

man your toys are good

[@michaelleehumble]

I have many more m.facebook.com/Blazers-Builds-652557841554561/

[@mpumelelokaelo3337]

real tow truck driving skills

[@michaelleehumble]

thanks

[@mpumelelokaelo3337]

No problem

[@nytahoe03]

Amazing job what parts did you buy? Bed truck body?

[@michaelleehumble]

I bought the cab. the rest I built

[@oliverg.201]

Very nice, well done, best tow truck i seen here on youtube.Where did you find that body, i am getting ready to build a tow truck myself but can not find any good body for it, most of them are to small.

[@michaelleehumble]

Thanks. the body is a 6th scale new bright CXT

[@4thavenuepebblebeach844]

+Michael Blazer were did u get the tow truck

[@michaelleehumble]

+4th avenue pebble beach I built it from scratch

[@4thavenuepebblebeach844]

+Michael Blazer dope man what's the price of the build

[@michaelleehumble]

+4th avenue pebble beach it's not for sale but I have around 1500 into the materials

[@chassenmanoi5750]

Where did you buy that flatbed. I want one to haul my brushless around and I have a tow company also

[@michaelleehumble]

I scratch built it

[@genracer8866]

awesome video

[@michaelleehumble]

Thanks

[@qc_cralwer7916]

wow Nice towing

[@michaelleehumble]

thank you

[@bey00001]

this is sick I'll pay 1,400 if you can possibly make me one I'm dead serious

[@michaelleehumble]

Thanks but that price is way low

[@bey00001]

OK ur the boss I'm sorry for that poor offer forgive me how much do you want make your price I'm sure to buy got more money than I can spend

[@michaelleehumble]

+Bey D it's not for sale at any price the highest offer I've refused so far was $5,000

[@michaelleehumble]

+Michael Blazer there's more than $1,400 in materials in this build

[@bey00001]

+Michael Blazer wow well that's one hell of a rig keep on trucking buddy

[@FrequentFlyerRC]

That was cool! 🤣😂🤣👍🏽

[@carteralt681]

Is everything built from scratch? The police car and all that? Btw very realistic! Nice job!

[@michaelleehumble]

I built the rollback, and "smashed" the new bright ford. The cop car is stock from Vaterra

[@michaelleehumble]

and thanks

[@johnieleltitandelais]

i did like your page on fbk... and really u awesome tho.... really i love your job....

[@michaelleehumble]

thank you

[@johnieleltitandelais]

+Michael Blazer and also i have my page too... is "fiebre rc cars 1/24 and drag slot cars 1/24"

[@johnieleltitandelais]

+Michael Blazer and also i have my page too... is "fiebre rc cars 1/24 and drag slot cars 1/24"

[@michaelleehumble]

+fiebre rc 1.24 The Game Changer I like the slot cars

[@johnieleltitandelais]

+Michael Blazer i made from chassis slot cars.... steering wheels, rc with lights... I'm the only one in the world

[@brandonsgarage5894]

How did you wreck that truck so good can you do a video on how u wrecked the truck plz😀

[@michaelleehumble]

I used a heat gun and shaped it

[@smithspears2653]

how many people thought this was a real car ?

[@michaelleehumble]

kell douglas a lot

[@lucasm-s5346]

I did

[@FordTruckGuyKyle]

great video!!! I thought it was real.

[@michaelleehumble]

thanks

[@ThunderGaming-eo8vk]

Where did you get this stuff it's nice

[@michaelleehumble]

I made it

[@domenicmadeley5611]

how long did it take you to build it

[@lorenzoortiz9817]

Que chulada dejugetes megustan

[@thatsmyrc]

Cool video is that a 1/18 scale police car? If so for whats it worth is it worth it? Thanks.

[@michaelleehumble]

ThatsMyRc no it's 10th

[@brianellsworth7920]

how many hrs to build great job maybe a heavy duty in the future you have the talent

[@michaelleehumble]

thanks. took around 6 months of building countless hours

[@DGKallDAY900]

The small cop car gave me a laugh

[@carlosrdz7468]

good video bro I like

[@michaelleehumble]

EL MADRE MIA thanks

[@pidogarcia6356]

did u back up into the police car? lol, this was really cool

[@michaelleehumble]

Pido Garcia no I didn't lol thanks

[@brianellsworth7920]

I don't know mike I did not c the safety chain in the front I might have to have the law issue a ticket you know the law 4 point hook up with a safety chain don't b lazy ha ha great craftsman ship keep up the good work

[@michaelleehumble]

I have all the proper equipment now lol

[@brianellsworth7920]

+Michael Blazer hope to c some new projects i will b following thanks

[@scottthompson13]

Do you have any info on the build of the tilt on the deck?

[@michaelleehumble]

On my Facebook page Blazers Builds

[@PuntoboyRST]

Love it. Who makes the body of the F150?

[@michaelleehumble]

New bright

[@PuntoboyRST]

@@michaelleehumble thank you

[@droppedchevy630]

wow I hope who ever was in the pick up are okay