RC Warn Winch Tutorial

[@norm_badwolf_9119]

Great tutorial, thanks! My first wireless set would not bind, but RC4WD sent me another free of charge and now my crawler is a winching machine 🔥

[@MehdiMirian]

Great to see that they sent you a new one and that is working, and thanks for watching!

[@BrothrBob]

I love your specific instructions, very clearly on what you need to install the winch.

[@MehdiMirian]

+Robert S Tiest thanks for your comment and for watching!

[@chrisburger4518]

Great post. I added the Warn winch to my TRX, but used the aux power source to power both my lights and the winch. I used existing plugs, but transferred wires to the plugs I needed to avoid numerous connections and ridiculously long wires. All worth noting I just used two of the supplied screws to attach the winch base to the stock bumper. With two it is very snug.

[@MehdiMirian]

Awesome, yes having wires everywhere doesn’t look too real!

[@tieintercepterpiolit]

@@MehdiMirian so I would be able to get a cable with servo connectors on each end and use that from the aux power source on the trx4 to the receiver for the winch?

[@MehdiMirian]

@@tieintercepterpiolit yes you should. Thanks for watching!

[@ivanlara5815]

Thanks for displaying part#'s witch is a huge help!!

[@MehdiMirian]

You’re welcome and thanks for watching!

[@devinrochelle9666]

Thanks for the help This is the first useful tutorial I have found for the wireless version

[@MehdiMirian]

Devin Rochelle truly appreciate your kind words and very happy that helped!

[@chadkyletheman41]

Five years late and rc4wd still can’t get it right!!! It’s ok tho, I’ll just pull apart the components and reinstall them CORRECTLY. It’s not like I paid good money or anything.

[@rickhunter1984]

You can also use a tx/rx lipo battery to power it as I pick up a genace 2s 7.4 2200mAh with jst and servo leads.

[@MehdiMirian]

Correct, thanks for watching!

[@MehdiMirian]

@RC Playground comments like yours are what keep this channel going, thank you for the kind words!

[@rcplayground7]

You'Re Welcome!

[@countrygamer7280]

rc mirian if I want to use 2 winches to I buy 2 and 1 controller or 2 and 2 controllers

[@MehdiMirian]

Country Gamer I'm assuming you want to use each one independently, and as you can see the remote comes with 1 receiver, so you need 2 remotes with 2 receivers, but if you want both winches to work at the same time, just get 1 remote and receiver and you'll just need to make a Y cable from the receiver to both winches. Let me know if i made myself clear ;)

[@countrygamer7280]

ok thanks cuz im making a scaler and I want a winch in the front and in the rear and im also making an 8x8 driven trailer and I want the winches to work together on that

[@MehdiMirian]

Country Gamer nice, so you'll need for the scaler 2 sets of receivers and remotes but only one for the 8x8, post pics of the process, that's a great build ;)

[@m-alaplante1039]

thank you, you have help me for this instalation ! sorry for my bad english... and your clearly in your instructions !

[@MehdiMirian]

Very glad it helped. You have great English! Thanks for watching!!!

[@javiercastaneda1722]

Thanks oldie this video. Any advice for the battery? Which one could be the best? Thanks!!!!

[@MehdiMirian]

As long as it’s a small lipo you should be fine. Thanks for watching!

[@TomBikonkav]

Great job and nice Winch!

[@MehdiMirian]

Tom Bikonkav thanks bro!

[@scottfirman]

I bought this for a fishing trawler I picked up on the cheap. the remotes were all fried. I can now drop my nets and raise them again. I will mount the remote on my transmitter with velcro so it doesnt get lost.

[@MehdiMirian]

+scott firman great and thanks for watching!

[@jameshayden3905]

Thanks so much I’ve been trying to find a winch that doesn’t huck to the rc car itself and I found this video next year ima buy it and put it on

[@MehdiMirian]

Glad it helped and thanks for watching!

[@wrhythm]

You could also solder your own battery cable for it.

[@MehdiMirian]

That’s another good idea too, i decided to keep it separated but again, a great option too. Thanks for watching!

[@timmyjackson6918]

Thank you for your great tutorial

[@MehdiMirian]

Thank you for the kind words and for watching!

[@Hdjiamd]

Nice vid man now I know how my winch will work U just gained a sub keep it up

[@MehdiMirian]

Thank you bro, happy it's helpful!

[@alexissides1485]

Hi , when you bind it does the box blink once when when you click and blinks another time when you let go of the control ?

[@MehdiMirian]

Don’t remember exactly but if after binding doesn’t work, try and bind it again. No matter how many flashes the light does, it should work. Here’s also another video from rc4wd in case you’d like a look. kzbin.info/www/bejne/hnrPfHZspNGEZ8k Hope if helps and Thanks for watching!

[@alexissides1485]

Mehdi Mirian alright thank you

[@josefstiselius8605]

Quick question five years after posting this video: does the winch automatically stop when the wire is all in or out? Will the motor keep trying to go if I'll continue to press the buttons? Also, about how much weight would this be able to pull? All the best!

[@MehdiMirian]

It doesn’t automatically stop, so yes if you keep pressing the button it’ll try to either roll it in or out. According to their website it says it can take about 6.6 pounds but I’ve pulled close to 10. Thanks for watching after 5 years! :)

[@Tanks_at_22]

Excellent tutorial very well explained thanks for sharing, stay safe.

[@MehdiMirian]

Very glad it helped and thanks for watching!

[@josereyes1528]

Could you please explain again how exactly to bind it. I'm running the same set up as you are I just can't get it to bind. I appreciate your help thanks a lot and awesome video

[@MehdiMirian]

+jose reyes if you’ve tried binding it like the manual says, I would contact the seller since it should bind in a couple of second and there could be a problem with yours but here’s a link for how the binding goes. www.beadlok.com/product/images/626/Z-S1092-Warn%20Winch%20Instruction%20manual%20Wireless%20color-V7.pdf

[@blackdawgrc8425]

beautiful video! love it! now! I can build my recovery semi.thanks.

[@MehdiMirian]

+Jeremy Pete thank you for the kind words and very happy it helped!

[@cabovercartel7671]

Any pictures

[@bellyisis]

Can’t you shorten any of those wires? Also can you instead of battery adapter connecter, cut off the large battery end and just splice on the small end?? Thank you

[@MehdiMirian]

Yes you can do both, I just wanted to keep all it’s original wires intact. Thanks for watching!

[@creamneuron]

Could you show in more detail how you mounted the winch to your slickrock? You didn't just mounted it with velcro right? ;)

[@MehdiMirian]

creamneuron correct, its mounted with velcro and using the screw holes of the winch mounting plate i soldered a wire from one to the other to secure it to the cage, will try and do a video!

[@fordon20s]

You sound like the bad guy from Skyfall which is pretty cool. Thanks for the video and help.

[@MehdiMirian]

+travisamc hahaha thanks bro!

[@porcupinebob7907]

Thats a great video, was easy to see what I needed, that female connector to the one on my warn winch was it, I called Maxx Prod. and found it!, Thx again! ;o)

[@MehdiMirian]

Glad it helped and thanks for watching!

[@somavilla33]

Hi there very helpful pal thanks! P. S. Do you have to have a separate battery to operate the winch? Sorry I'm a beginner!

[@MehdiMirian]

+somavilla33 glad you found it helpful and yes because your RC most probably will use a bigger and more powerful battery that would melt the winchs motor.

[@somavilla33]

Mehdi Mirian many thanks

[@geritomlet2524]

Great vid but I want to control my winch with the 4th channel on my remote, how is this done? plugging the winch receiver into the 4th channel docent work and plugging the winch directly into the 4th channel docent work either. I don't know what else to do.

[@MehdiMirian]

According to rc4wd, you need to connect the winch to a “control unit”, and then connect the control unit to your receiver so it works on your remote. This is the “control unit” link. Hope this works! store.rc4wd.com/RC4WD-Wired-Winch-Control-Unit_p_3725.html

[@JamesJohnsonRC]

Great video the winch looks awesome you explained it very well step by step it looked great on the rock crawler nice work my friend :-)

[@MehdiMirian]

James Johnson thanks bro, always a struggle with my accent and specially getting to technical stuff haha but again happy you liked it!

[@JamesJohnsonRC]

rc mirian it was very well spoken my friend keep up the good work :-)

[@MehdiMirian]

thanks James!

[@mc-mg8xu]

what is the max voltagenice job dude

[@MehdiMirian]

+rcmaster 1965elcamino meaning max as for what type of battery? the one in the video is the max otherwise winch won't work.

[@mc-mg8xu]

yes what is it

[@MehdiMirian]

What the video and you'll see!

[@nickc.8814]

Nice job! Just one question: how and where are you mounting the battery and receiver inside the Slickrock?

[@MehdiMirian]

Nick C. Receiver is underneath the hood, winch on the servo and battery goes on copilot side.

[@nickc.8814]

rc mirian nice setup! It looks very realistic.

[@MehdiMirian]

thanks Nick C. that's been the whole idea do good to hear it from someone else than me :)

[@nickc.8814]

rc mirian will you be putting this winch on your Trail Stomper at some point?

[@MehdiMirian]

Nick C. Ohhhhhhh yes ;)

[@phoenixsmith9516]

What kind of charger do you use for the battery

[@MehdiMirian]

How to charge RC Lipos and NIMH Batteries Tutorial kzbin.info/www/bejne/gaO0Z36KpqtnkMk

[@rjsully8830]

did you buy every thing all together or did you have to buy it all separate

[@MehdiMirian]

+Rj Arseneau-Sullivan I bought the winch, remote and receiver in one package so they come together, separately got the battery.

[@astrogreenarrow]

I have mine connected to a side connection to my transmitter and then to the box and the box to the winch my lights all come on when on but I go to use the remote and nothing Do I have to remind them if I got it used from another person Also do I have too change batter on the remote if so what battery type

[@MehdiMirian]

Try changing the remote’s battery first, if the problems persists, try connecting the transmitter to an individual small Lipo and bind it to the remote. That should do the trick. This is the battery for the remote, store.rc4wd.com/Replacement-Battery-for-110-Warn-Wireless-Controller_p_3739.html Hope if helps and Thanks for watching!

[@kenestra123]

Wireless not binding, is the box supposed to flash when binding is complete? Also is it supposed to flash when binding the remote is complete? How long are you supposed to hold for binding?

[@MehdiMirian]

You’re supposed to hold it for 3 seconds and after flashing it should stop, did that work?

[@kenestra123]

So you do get a flashing light when holding the button?

[@kenestra123]

No, it didn’t work.

[@habib1971]

Can I pull power from the receiver for this or do I need to run a second battery

[@MehdiMirian]

If your receiver has an extra space to connect it, yes try it out since it should.

[@habib1971]

@@MehdiMirian ok, was looking into it for my red at and I figured it should just be able to take power from it

[@MehdiMirian]

@@habib1971 thanks for watching!

[@Beastlysimmer_uk]

Do you need to use a separate battery or can yiu use the one that powers the car?

[@MehdiMirian]

Has to be a separate battery since usually 1/10 rc cars use big lipo batteries. Thanks for watching!

[@Beastlysimmer_uk]

@@MehdiMirian thanks for the reply

[@MehdiMirian]

@@Beastlysimmer_uk you’re welcome!

[@SteepVisions]

I am in need a minature winch like this that can pull in around 1ft of cable in around 2 seconds. Anything on the market like that? Must be able to pull anywhere from 15-25lbs

[@MehdiMirian]

This winch runs slow, I truly don’t know where to find for a winch that pulls that fast but wish you all the best. Thanks for watching!

[@SteepVisions]

@@MehdiMirian If you find something let me know. It's not for a model car, I just need something small-medium sized that I can be powered with a small lipo battery. I don't need a full size real life winch haha

[@mr.sinister1279]

So the winch wil not work if u plug it straight in to the vehicles receiver even if u have a 16 channel transmitter .. u need the the other attachments to run it?

[@MehdiMirian]

If you have a transmitter with at least 3 channels, then you can use the third channel for the winch to avoid getting the winch controller. But you’ll always need the winch and it’s receiver plus a battery for it since it cannot use the bigger one from the rc. Thanks for watching!

[@mr.sinister1279]

@@MehdiMirian ok thanks for replying

[@westcoastoutdoors2985]

This video was very helpful Thanks

[@MehdiMirian]

Thanks and happy it was helpful!

[@TheAmericanUhate]

Can this be used on a servo winch the same as the scale winch?

[@MehdiMirian]

Yes it should, try it out and let me know :)

[@TheAmericanUhate]

@@MehdiMirian A servo usually uses a signal wire to change direction, where the scale winches are basically just directly to the motor in the winch?

[@DTWC]

Any chance you can give battery info. Amazon sucks trying to find right size with out part number. Dont want a big battery just one to run winch, thanks if you answer lol

[@MehdiMirian]

Needs to be a 2 or 3 cell lipo, something like this, store.rc4wd.com/RC4WD-74V-850mAh-2S-LiPo-Battery-w-Balance-Plug_p_7095.html. Thanks for watching!

[@DTWC]

@@MehdiMirian thank you

[@texaspoontaper5813]

Do you have to buy it all separately or does it come with all of it

[@MehdiMirian]

If you buy the combo, includes everything but the battery (lipo) to power the winch.

[@texaspoontaper5813]

Thank you

[@MehdiMirian]

You’re welcome!

[@caterpillart5662]

what kinda of stuff did you use in this video?

[@MehdiMirian]

Everything was listed in the video, thanks for watching!

[@rccrawler70]

Excellent video.! I liked.!

[@MehdiMirian]

Thank you and thanks for watching!

[@hussain8910]

Will I be able to charge that battery using thr traxxas ez peak dual charger. If not can you tell me the part # I will need

[@MehdiMirian]

You should be able to charge any 2s or 3s LiPo. Perhaps an adapter might be needed to connect the battery to the charger, but try first to simply connect it directly to your charger, if not try one of these links to find the correct one, www.amazon.com/dp/B016065X72 www.amazon.com/dp/B016075GEG www.amazon.com/dp/B01607M9C8

[@MrThewhip333]

I’m building a twin boom wrecker on wpl can I run 2 of these off 1 remote?

[@MehdiMirian]

Unfortunately this winch cannot be used using that way since they already come pre binded to their remote. But, you could try getting the winch only so you can use another receiver with more channels so you can connect 2 winches to it and use only one remote. Good luck and thanks for watching!

[@MrThewhip333]

Mehdi Mirian thanks so much! I

[@znovosad555]

I have the wired controller for mine. I can't get it to stop being on. I have a feeling it's my rcs receiver but I'm not entirely sure. As long it's connected, it's either winching in or out.

[@MehdiMirian]

+Zach Novosad how strange but from a forum I read I remember someone saying a similar problem, that's why I went for the wireless one.

[@znovosad555]

Mehdi Mirian I actually fixed the problem. I needed to program my 3rd channel to a 4 position switch I believe. It was only set as a two position

[@MehdiMirian]

+Zach Novosad perfect!

[@rcplayground7]

My preference KZbin channel : rc mirian !

[@MehdiMirian]

Truly appreciate it!

[@al-baghdadi7854]

Is this Adapter big Tamiya Male to JST Male ?

[@MehdiMirian]

Yes it is, thanks for watching!

[@roscop466]

Would you need a lvc or lvd unit running lipo with this setup? I usually run nimhs or 9v for accessories so I wouldnt know.

[@MehdiMirian]

This winch works with 6 to 11 volts batteries, I just used this lipo to extende play time but you can use nimh too just make sure it's within the voltage I mentioned ;)

[@roscop466]

rc mirian oh okay. So pretty much when the winches performance drops its sorta like a lvc? That I would assume this particular winch setup will not operate under a certain voltage? Still if using a 2s lipo and the winch setup being min of 6volts unless using a very high quality lipo pack running them down to 3v per cell is cutting it quite close. I do understand its a winch and wont be used nearly as much as say lights or whatever but if you happen to neglect checking the winch lipo voltage over a period of time could have catastrophic effects lol. And of course if your using lipo to power the rc you can always just hook it up to run off that and use its lvc if not running a separate power source for winch. Great vid too!

[@MehdiMirian]

Rosco P thanks bro and yes I'm powering with the videos battery the winch and only that, i've tested it and with one charge can hold up to 15 to 20 recoveries so for one run its more than enough lol

[@standardheat-fs8159]

Is it waterproof? Because I always go mudding with my Crawler!

[@MehdiMirian]

It is Not, so before mudding you need to waterproof it on your own, thanks for watching!

[@standardheat-fs8159]

Mehdi Mirian Thanks for the answer!

[@TheMartynneil]

Does the winch controller use line of sight in order to work?

[@MehdiMirian]

+TheMartynneil no, the remote can be at about 5 ft or a bit more from the receiver and pointed to the sky if you want and still work, at least that's the farthest I've tested it since I'm always near the RC.

[@michaelkitchen9594]

What are the voltage of your battery? 1500, 1000 ?

[@MehdiMirian]

It’s a 2s 800mah battery

[@linguistiquesmuroni]

Hello, how powerful is this winch?

[@MehdiMirian]

Very powerful, can hold a load of around 25 pounds.

[@linguistiquesmuroni]

@@MehdiMirian Merci :-)

[@dafyddjames2494]

Is it all waterproof or did you have to waterproof it?

[@MehdiMirian]

+Dafydd James this winch kit is water resistant but I've submerged it in water and still works ;)

[@banditsdruglab5340]

What kind of battery did you use?

[@MehdiMirian]

A small lipo

[@RemotelyCultured]

Do you have any links to all items listed in this video?

[@MehdiMirian]

www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEFES&P=0 www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEFEP&P=M www.hobbyzone.com/batteries/lipo/2-cell/DYN1475.html Hope this helps!

[@denizcaglyan9150]

There are too much different cable plugs..Thank You

[@MehdiMirian]

Glad it helped out, thanks for watching!

[@canalkleberonline1202]

I can't find this cable bec, can you help me where to find this cable?

[@MehdiMirian]

This is the one, www.amazon.com/dp/B00JUJCNNY/ref=cm_sw_r_cp_awdb_imm_K18NQDZ57Y8BBA9W70SR?_encoding=UTF8&psc=1

[@rcmuis9535]

Nice video and greate

[@MehdiMirian]

Thank you and thanks for watching!

[@gingerbreadmanquan]

I need now plz help where can I get the parts ?

[@MehdiMirian]

At your local hobby shop or at authorized hobby websites like integy.com or rc4wd.com

[@Dhennanxne]

sir, was that battery 7.4 volts or not? i have a 7.4 v battery with the same end so i would need the adapter but could i use it (1000mAh)

[@MehdiMirian]

+MR.CREATE yes you can!

[@Dhennanxne]

ok thanks a lot :)

[@frankiero2367]

Can anyone share if using a 7.4v 850mAh battery would be too much for this type of winch? I intend to run same set up as the video (powering the winch directly to the battery). But want to ask just to make sure of my options.

[@MehdiMirian]

According to the manufacturer, this winch can be used using a Voltage: 6v to 11.1v. So your battery looks good. Thanks for watching!

[@frankiero2367]

@@MehdiMirian "Thank you" Mehdi. Your feedback and video is awesome.

[@MehdiMirian]

Thank you for the kind words!

[@michaelkitchen9594]

I just got a 750mah . Is that too small?

[@MehdiMirian]

No it’s not small, a winch is powered with small batteries, thanks for watching!

[@ArmanRC]

thanks for the tips buddy

[@MehdiMirian]

Happy it helped, thanks for watching!

[@akclan33]

Do you have an item number for that Kyosho to Bec connector

[@MehdiMirian]

Unfortunately I don’t have it

[@TrooperSadowski617]

Where do you get blue battery

[@MehdiMirian]

Try your local hobby grade store and if not there are many online sellers, integy, Amazon or even eBay!

[@markpurrington2121]

I thought you said that you weren’t going to be connecting the winch to a rock crawler?

[@MehdiMirian]

That’s the whole goal, to use it on a rock crawler, on the vaterra slickrock! Thanks for watching!

[@RobertCarrizal]

what's brand for batteries smaller

[@MehdiMirian]

There are several, check out this link. www.hobbytown.com/rc-car-lipo-lihv-batteries/c1393

[@hehshshs8106]

Do u need the wireless remote

[@MehdiMirian]

+Hehs hshs without it there's no way to control the winch

[@michaelkitchen9594]

What size is your battery?

[@MehdiMirian]

It’s a 2s 800 mili amp battery. Thanks for watching!

[@sharuk66976]

bro where are you buy this

[@MehdiMirian]

Local hobby shops or try integy.com, rc4wd.com. Thanks for watching!

[@krakow0457]

Nice, thanks for helping

[@MehdiMirian]

+Krakow 04 you're very welcome and thanks for watching!

[@jordanwoolley8068]

Does it come with the remote?

[@MehdiMirian]

+Jordan Woolley there are 2 versions, one sold with remote and one without. Winch only sells for about $35 and with remote for $70.

[@jordanwoolley8068]

+rc mirian thanks

[@jsracer20x]

my winch quit working and the light on the receiver flashes on when i hit the buttons

[@MehdiMirian]

Could try re-binding it, if that doesn’t work try changing the battery on the winch controller. Hopefully it’s one of these two so it’s an easy fix :). Thanks for watching!

[@MrMrsregor]

is there a free spool function ?

[@MehdiMirian]

+MrMrsregor unfortunately don't know but if you find out let me know ;)

[@alexmanoni3196]

Where i can find this winch??

[@MehdiMirian]

At rc4wd.com

[@jameshouston5940]

Is it water proof?

[@MehdiMirian]

No, you have to make it waterproof by either putting it inside a waterproof box or spraying a couple of coatings to seal the electronics.

[@yojithecarguy]

Where did you get the battery?

[@MehdiMirian]

At integy.com

[@yojithecarguy]

@@MehdiMirian do you have a link for the battery?

[@yojithecarguy]

@@MehdiMirian where could I get a charger for that type of battery?

[@yojithecarguy]

@@MehdiMirian I don't see it and I need to get a charger too.

[@MehdiMirian]

@@yojithecarguy you could try and get everything from rc4wd page. It’s out of stock but this is an example of what type of battery you need to power up the winch only, store.rc4wd.com/Batteries-Chargers_c_34.html

[@tjsrcgarage]

Can i use it on a 1/16 crawler??

[@MehdiMirian]

You can use it on any RC from 1/10 to 1/18 so yes, thanks for watching!

[@tjsrcgarage]

@@MehdiMirian THANK YOU FOR THE INFO..

[@ridgerc5976]

I've searched for that battery adapter and it must not be made anymore.

[@MehdiMirian]

That sucks, hopefully you can still find it on eBay or other site. Thanks for watching!

[@yojithecarguy]

What is that adapter called?

[@MehdiMirian]

It’s shown on the video, Kyosho charger to BEC battery adapter. Thanks for watching!

[@geneside0]

Best tutorial ever, great job and thanks heaps

[@MehdiMirian]

Thank you for the kind words and glad it helped!

[@colinnewsham5659]

How many volts is the battery

[@MehdiMirian]

A bit late but it’s a 2s 800 mili amp battery. Thanks for watching!

[@rjsully8830]

were did you buy it

[@MehdiMirian]

+Rj Arseneau-Sullivan at a hobby shop in Calgary Canada but are sold at rc4wd website

[@rjsully8830]

Ok i am wondering because i was looking for one for my slick rock

[@MehdiMirian]

+Rj Arseneau-Sullivan look online at rc4wd or go to a local hobby shop, thanks for watching!

[@carlosjardon5323]

Hola buenas noches, yo tengo el receptor pero no tengo el transmisor. Como puedo configurar otro transmisor diferente a ese receptor. Porfavor ayúdame gracias. Saludos

[@MehdiMirian]

Para poder conectar un transmisor, tienes que tener un radio con 3 canales, tú tercer canal tiene que ser (on/off/on) de lo contrario no funcionara. Si lo tienes, este video te podría ayudar para conectarlo, m.kzbin.info/www/bejne/fmq6mqSEl7F8o9k Ahora si no tienes este tipo de radio, es mejor adquirir el transmisor de rc4wd. Espero te ayude y gracias por tu visita a mi cabal!

[@m998hmmwv7]

Thank you that was perfect!

[@MehdiMirian]

+Dean Labella very glad it helped!

[@franciscorobles7590]

I’m having trouble connecting it to the controller it comes with

[@MehdiMirian]

Where you able to follow the video instructions? If so and still isn’t connecting, I know it sounds silly but see if the battery is compatible, if it’s fully charged and if after all this it still won’t connect, better contact the store you got it from, perhaps you got a faulty device. Best of luck and thanks for watching!

[@muhammadilham7489]

Thank you😊😊

[@MehdiMirian]

Thank you for watching!

[@WIZARDWERX]

RC4WD,I've been missing out,thx

[@MehdiMirian]

+WIZARDWERX they have great products ;)

[@MehdiMirian]

@RC Playground sorry don't speak French but i do Spanish though :)

[@rcplayground7]

OK ...

[@paul.i3606]

Connect battery last

[@MehdiMirian]

thanks for watching!

[@deletedchannel6733]

Can you leave a link to the battery please

[@MehdiMirian]

This battery was bought at a local hobby shop so can’t find the exact one but this will do, floureon 7.4V 2S 3300mAh 35C Li-Polymer Lipo RC Battery Packs with T Plug Connector for RC Airplane RC Helicopter RC Car RC Truck RC Boat UAV Drone FPV(1PC) www.amazon.com/dp/B06ZZ1JWH8/ref=cm_sw_r_cp_api_i_rKU7Ab9SWS35M This winch can be used with a 2s look battery and with a max voltage of 11V, hope this helps!

[@MehdiMirian]

floureon 7.4V 2S 3300mAh 35C Li-Polymer Lipo RC Battery Packs with T Plug Connector for RC Airplane RC ttps://www.amazon.com/dp/B06ZZ1JWH8/ref=cm_sw_r_cp_api_i_rKU7Ab9SWS35M

[@deletedchannel6733]

But will it work for this winch

[@MehdiMirian]

Yes, the link it’s a for a battery that works for this winch.

[@petedaisler270]

can I adapt 9v battery?

[@MehdiMirian]

+Pete Daisler yes, it accepts 6 to 11 volts batteries

[@petedaisler270]

Thank you very much.

[@MehdiMirian]

+Pete Daisler you're welcome!

[@louisdevaux7257]

What is the batery

[@MehdiMirian]

+Louis Devaux i specified in the video but its a 2s 800 mha lipo

[@KevinMillard68]

nice

[@MehdiMirian]

KevinMillard68 thanks bro!

[@KevinMillard68]

rc mirian your welcome

[@customfastrc7671]

Thanks the video was helpful. I subbed ya

[@MehdiMirian]

+custom fast rc many thanks and very glad it helped!

[@rccrawlerextreme]

This for sharing 😊

[@MehdiMirian]

My pleasure 😊 and thanks for watching!

[@SebLorntson]

What battery

[@MehdiMirian]

Any small lipo battery will work since you’ll be powering only a winch. Thanks for watching!

[@kdoeone]

Mine didn't work. Changed the Batts Still nothing.

[@MehdiMirian]

Perhaps exchanging it for an new one? Maybe you hoy a faulty one.

[@coling6103]

Battery matter?

[@MehdiMirian]

It does, but if you stick to small lipo ones you’ll be ok, thanks for watching!

[@coling6103]

@@MehdiMirian alright so can i use nimh because i burnt a wireless controller the other day and i dont know how?

[@MehdiMirian]

These are the specs recommended from rc4wd, Voltage: 6v to 11.1v, Will operate on 3 Cell Lipo. I’ve used mine with a 3 cell lipo and has never malfunctioned. Hope this helps!