Рет қаралды 1,145
This job was more difficult than intended. But most of the information should here for your assistance. I remove the door first then find the four screws that allow to cover to be removed, two at back and two towards front on the side covered with little round rubber covers. I also show where the hose goes to the pressure switch since it came loose on me. Removing the lid or door first aids in working with the cover since it lightens the weight. Then I bypass the lid switch and completely remove it. Finally the pesky lid second possibly magnetic switch is under the cover top right hand side under a small grey cover. That switch is the most annoying thing about this machine. Took me four hours removing the cover three times trying to figure out the problem for myself and you guys. If I was able to some hang the cover in the correct position I'm sure things could have went smoother. Best of luck and your project and I will be including timestamps or as KZbin calls them chapters.
0.00 - Beginning of video
2.32 - show busted washer washing machine lid hinges
5.46 - start removing washer washing machine lid
8.36 - last two screw to remove washer washing machine cover
9.13 - lifting washer washing machine cover
10.59 - removing inner washer washing machine inner cover
11.54 - Access to hinge screw washer washing machine hinges
16.32 - reconnecting hose to vacuum pressure switch washer washing machine cover
17.08 - reinstalling inner cover washer washing machine
20.36 - Bypass washer washing machine lid switch
24.06 - E-3 error code annoying little fix
• How to fix or repair y... E-3 error code fix part one
• Magic Chef / RCA 3.0 w... RCA Magic chef 3.0 pump replacement
• Part two Midea Mae50 w... Remove lint most modern day washer or washing machine.