hola tengo RCF 715A le he cambiado el IRS y sigue sin encender porque puede ser me podrias ayudar. gracias
@izzzzzz6 Жыл бұрын
I i have one of these (mk4) goes into protect mode. One side is not working correctly. Seems like an issue stopping the IRS chip from firing up as it should. I was told to remove all glue but on the mk4 they filled the through holes to prevent glue coming to the SMD side. Could it be bad glue on the component side causing a smd transistor or a capacitor to break down?
@turkuazzz1377 Жыл бұрын
hello i have those same speakers and now i wann know hot to put volume knob from behind amp module ,cuz at middle 12o clok speakers seems to be weak and compare with other brands which i have sount at half of them power and other brands is less louder in the specs , mixer output signal blinking at 0 db and speaker rcf art 715 at 12 o clok middle of the knob seems to be so quietly
@Savsevents Жыл бұрын
Hi, I have a Rcf art715a, the amp powers on and status light remains on. Please suggest.thanks
@TheProleads Жыл бұрын
Hi It could a number of things but first check that you have 5 green LEDs on the power section then check the 3.3V which powers the pic which drives the status LED.
@marius1167 ай бұрын
hello .why does these speakers heat so much ,i have art 915 a and i measuread the temp on the back plate and i have 56 almost 60 deegres celsius is this normal ?thanks !!
@rafaelbarroso70787 ай бұрын
Hello, I need your help if possible of course. I have two RCF amplified boxes and I need help to solve the defects in each box, one box is the HD 32-A, this box was working normally and one day I went to turn on the box and when I turned it on the box was showing a explosive and pulsing noise and when I turned it off and on shortly afterwards, the box stopped making the noise, then I turned it off and on again and the noise returned and it remains that way to this day, could you help me? I have a little experience with electronics and if you have any tips or even an electrical diagram I would be very grateful, big hug. Sorry for the English, it was translated by Google, I'm from Brazil Amazonas, my name is Rafael.
@rafaelbarroso70787 ай бұрын
Hello, I need your help if possible of course. I have two RCF amplified boxes and I need help to solve the defects in each box, one box is the ART 310-A, it was playing normally and suddenly it started playing without the treble, only the bass of the box was working, my son who was listening to sound at the time said that the box made an explosion-like noise and only the bass was working. Could you help me with some tips, I have a little experience with electronics and if you have any tips and even the electrical diagram I would be very grateful, big hug. Sorry for the English, it was translated by Google, I'm from Brazil Amazonas, my name is Rafael.