Traxxas Slash 4x4 vs Traxxas Slash 2wd COMPARISON! What’s the Difference?? Which ONES BEST FOR YOU??

[@N_Fortune]

So others are aware...Traxxas has a Power Up Program that let's you trade in the brushed motor & ESC for brushless for $125. You can send it to Traxxas or better yet, you can bring it to your LHS & they will swap it & you don't have to pay to ship it to Traxxas. You can also do the same to upgrade the radio & receiver and it's less than buying new ones! 👍 Great comparison btw, thx!

[@RCKnockout]

Thanks! I didn’t realize they did that with the radio system, same as with the power system

[@d-nice2866]

So with either scale the brushless gonna be $125?

[@NiteShade_BZ]

You can also trade up your tq radio for a tqi if you wanted

[@WestPat23]

Another great video, and great info on the trade program!!!

[@robertstaats535]

4 mins in and now I know what I need to do with my 2wd

[@wapartist]

Major difference is the motor position 2wd being heavy in the tail makes for Awesome slinging

[@RCKnockout]

2wd is definitely a wheelie machine!

[@leftskidlow8371]

Good video. I agree that if you are only buying one SC truck or if you are an experienced driver, then the 4WD brushless is the way to go for value. That being said, a 4WD SC and a 2WD are really two different trucks, in terms of driving characteristics and what you would expect to get out of them. Personally, I enjoy driving a 2WD over a 4WD because it takes more skill to handle it. I think if you try approaching a 2WD with the expectation that it is going to perform like a 4WD, then you’ll get very frustrated. The key to getting a good performance out of a 2WD SC truck is having good throttle control and being able to manage the power well, as you pick your lines and corners. In this sense, the bone stock 2WD Slash is actually the best truck to learn how to drive off-road with. It’s slow enough that you can easily keep it under control and get the coordination with throttle, turning and putting truck exactly where you want it, but just fast enough that you will lose control easily if you get sloppy with your driving. With a 4WD, it’s way more forgiving to drive, even if you don’t have very good skills. So, I would say, for a beginner, buy the 2WD Slash and learn to drive it as is. Save your money for when you’re ready to buy your next truck, which should be a brushless 4WD. If you end-up really getting into the hobby, then you’ll pretty much own everything anyway. Also, if you are mostly going to drive on high traction areas, like pavements, get the 2WD. You’ll get better performance out of it than a 4WD and you won’t be binding and breaking drive trains.

[@RCKnockout]

Those are all valid points! 👍

[@leftskidlow8371]

@@RCKnockout Thanks. I really like how you looked at what is really the best bang for your buck when looking at different versions of a Slash. I’m not sure if you’ve done this or not, but it would be fun if you made a video comparing how a 2WD Slash compares to 4WD Slash in different driving surfaces, especially that you’ve got a nice upgraded 2WD.

[@RCKnockout]

@@leftskidlow8371 I’ve kinda done comparisons….but very loose…I haven’t done like a head to head in the same video….maybe I’ll have to do that

[@chuy5152]

Thanks bro i bought my first truck and is 2wd, i regreted it at first but is just fun to do donuts, but reading your comments help understand a little.more, i love.my 2wd for now, is fun but yea on dirt i loose.control even on pavement😅 ill get the hang of it

[@AussieDad79]

I love a well timed ‘that’s what she said’ line! 😝

[@RCKnockout]

Don’t we all? Lol 😂

[@bradleyeddie8429]

i guess I am kinda randomly asking but do anyone know a good site to watch newly released series online ?

[@connorzavier226]

@Bradley Eddie flixportal :P

[@bradleyeddie8429]

@Connor Zavier thanks, I went there and it seems like they got a lot of movies there :) Appreciate it !

[@connorzavier226]

@Bradley Eddie glad I could help xD

[@Dlon24]

Finally someone knowledgeable with valuable information to give. Great video!

[@RCKnockout]

Glad it was helpful!

[@blancaperez7219]

This guy's the best I've been looking for this everywhere on KZbin finally I found it

[@RCKnockout]

Appreciate it man! 😉

[@White000Crow]

I love the cheapest 2wd model, I bought the builders kit. I love how squirrelly it is. I swapped in a bigger brushless system and 32p all metal gears. It’s currently geared to go about 35mph.

[@RCKnockout]

Nice! Is that with a 2S or 3S Lipo?

[@White000Crow]

@@RCKnockout 2S because it’s a cheap esc and shuts off quick with 3S and it has a weird hesitation with the throttle no matter how I program it. I just ordered a Hobbywing esc so it should really make it move. The motor is a 3660 so the power should be there.

[@RCKnockout]

@@White000Crow I gotcha! Probably best to play it safe and run on 2s

[@ridered7262]

Thanks for the video, 30 yrs of motocross and back into r/c cars much easier on the body. I just grabbed a 2wd slash so this was very helpful.

[@RCKnockout]

Glad you found the video helpful! Have fun! 👍😉

[@ridered7262]

@@RCKnockout Thanks!

[@RCKnockout]

@@ridered7262 you’re welcome!

[@crazesalts6720]

Awesome video, and it covers so much that a lot of channels don’t! I’m planning on buying a 2wd Slash just because it’s the only thing allowed for the increasing in popularity No Prep Drag events, but now I know there’s a lot of stuff I’m going to need to upgrade. Keep up the good work!

[@RCKnockout]

Thanks! I’m glad you gained something from the video! 👍😉

[@zanderflander7880]

That hcg chassis gives it so much character, they are a blast to race stock class with that high chassis! I tried the Lcg and was disappointed.

[@RCKnockout]

The hcg definitely has a more realistic feel….but it also flips way easier than a lcg chassis….so they both have positives and negatives

[@daverussell8188]

wow . you did excellent job of explaining . I did not realize the different in the slash . I been wanting one for while . I was going with 2wd drive xl-5 but after this its the 4x4 vxL. Thanks , great video

[@RCKnockout]

Glad you gained something from it! Yeah very big difference…..I would definitely go for the 4x4 vxl model if you’ve got the money

[@tomtomlin3408]

Thanks for the plain talk on the differences between the Slash models. Looks like there is an Ultimate in my future...

[@RCKnockout]

No problem….the Ultimate definitely is the Top Slash model

[@zaflashzach8011]

This guy is so good at explaining, he should have lots more views and subs.

[@RCKnockout]

Appreciate it!

[@northwestrider369]

I had the first Rustler VXL. It was a standard rustler with a brushless and 3S. Only traction control was your finger. The receiver controller was exactly the same as the one I had for my standard rustler. Traxxas has come a long way.

[@RCKnockout]

Yeah they’ve definitely come a long ways! 😉

[@206beastman]

I got my first rustler in 97 Novak duster speed controller and nicad battery's you guys have no idea how far they have come. We used to discharge are batteries with light bulbs lipo wasn't even around I remember being my first nimh battery 7 cell hump pack that was fast at almost 30

[@brandonmcclellan30]

Best drivetrain upgrade for Traxxas Slash 4x4: replace Slipper clutch with center differential. I did that upgrade on my Traxxas Slash 4x4 and it corners like a dream. Put Sway bars on the suspension, too.

[@RCKnockout]

I’ve got a center diff in mine now…..haven’t done the sway bars yet

[@josephplatania5593]

I ran wltoys for along time. Now I’ve been buying used traxxas slash 2nd and 4wd rollers. I load them with cheap brushless kits. They run hard hold up well and are really fun. The 4wd is a better all around car.

[@RCKnockout]

I’d agree for most situations the 4wd is a better choice

[@RTmadnesstoo]

If you plan on Club Racing check the rules. Many clubs require 2 wheel drive and it can't be a converted 4 wheel drive. We have great dirt oval races that get really competitive but 2WD Only. Same goes for the popular drag races.

[@RCKnockout]

Good to know…Thanks for the info!! 👍😉

[@jr.ramirez5798]

I prefer 2wd always

[@BraunsonKane]

Thank you I have been wanting a new rc car but didn’t know what to get

[@RCKnockout]

@@BraunsonKane you’re welcome! Glad you found the video helpful!

[@jesusochoa1141]

Thanks for the review. I always wondered what was the better model. Keep up the good work.

[@RCKnockout]

Glad you found it helpful!

[@ThePchatty16]

Great video and advice, I have the 2wd but I’ve spent a boat load on upgrades.

[@RCKnockout]

Thanks! Glad you found it helpful!

[@TheYoungerSemiOldMan]

I (Santa) bought my 6yr old son the 2wd base model. I bought the 2wd VXL. Both are great and plenty of fun. The shop said for me not to get Tue 4wd BC 4wd are slower as it has more weight, and more moving parts, which also mean more possibilities to go wrong. So I got the 2wd.

[@RCKnockout]

I gotcha…..as for slower….that might be true for a brushed slash 2wd compared to a 4x4….but with the VXL models the 4x4 Slash usually can launch harder and stay on the ground compared to the 2wd vxl model

[@TheYoungerSemiOldMan]

@@RCKnockout man, I wish I watched your video first and asked you a few before the buy. Next, what do you recommend I upgrade without breakog the bank and will save me issues later? I know the servo being plastic can be an issue. It was for my truck 20yrs ago. This is the first RC car since then. Technology has come a long way

[@RCKnockout]

@@TheYoungerSemiOldMan not a lot really…..the rear shock tower is kinda weak….I swapped out to rpm also rpm suspension arms aren’t a bad idea

[@TheYoungerSemiOldMan]

@@RCKnockout @RC just watching your video, you know your stuff man. Keep it up bro. What's your opinion on these guys lifting the mounts for the body and putting on larger tires and such? Worth it or nah, keep it the way it is? It looks almost like a loft kit but for the slash

[@RCKnockout]

@@TheYoungerSemiOldMan thanks…..it depends on what you wanna do….I know some people convert the slash into a monster truck……not really sure how well it would drive after that…..I’m sure the handling will be different though

[@allenmichaud1605]

When he said that's what she said I instantly subscribed

[@RCKnockout]

Appreciate it! Lol 😂

[@achillesbuilds2432]

My 2wd slash is build for asphalt, doesn't flip and runs in the low 90 mph. Depends on what you want to do with them. If you're going to toss money into it then don't worry about buying the upgraded model if those parts are going to end up in a box in a few months. Get the basic one and make it how you want and not how Traxxas sent it. That's the glory of this hobby.

[@RCKnockout]

Yeah that is the fun part…..making it your own

[@parryhotter5575]

This is the best Traxxas Slash breakdown/buyers guide on KZbin. And I think I have seen all of them duing my one month of research on which RC car to get. Was going to start out with a stock 4x4, but after watching this it made alot more sense to order the 4x4 VXL instead. How do you deal with the "parachute effect" by the way? It seem to be a real issue with these models once you go S3 or get some serious airtime..

[@RCKnockout]

Yeah the VXL is definitely the better deal…I cut holes in the back of the body…it helps but it can still happen

[@damiel8837]

thank you so much i was wondering if i should go with a 2 wheel vxl or a 4 wheel and upgrade it to vxl but now im am going to spend a little extra to get a 4x4 vxl

[@RCKnockout]

No problem! It’s totally worth it man!

[@kg5nja693]

Also with the TQI receivers you can use the same TQI transmitter. I dont remember for how many but I do think its for 10 cars.

[@RCKnockout]

Really? I didn’t know you could use it with more than one? So whichever model you have on, it will link to?

[@kg5nja693]

@@RCKnockout I have mine link to my trx6 my M41 boat and the Mustang. As long as the receiver is a TQi you can bind them together. When you want to use one of the cars you just turn on the transmitter and then which ever car or truck you want and it finds it.

[@RCKnockout]

@@kg5nja693 I gotcha. The only downside to that would be if I’m trying to film a video or bash two rcs that are bound on the same transmitter at the same time lol 😂

[@kg5nja693]

@@RCKnockout But you can only drive one at a time. If needed you could always rebind to the transmitter that it came with.

[@RCKnockout]

@@kg5nja693 I meant If I’m with a friend trying to drive two that are bound to the same transmitter lol 😂

[@eddieneutelings6455]

Dude you go over a lot of of stuff and that’s awesome.I have a 2wd slash I want to upgrade the shocks.I want a race worthy slash. I have done some upgrades

[@RCKnockout]

Thanks man! That’s a cool idea!

[@brettnorris3140]

I have slash 2wd vxl, 4wd vxl, and nitro slash. Don’t ask why. 4wd better overall control and power through grass and heavy stuff, though less battery life. 2wd is fun and really engages you when driving. 2wd best on loose flat terrain and thus also drives more realistically, better battery life. It depends where you will be running the vehicle and what you want for battery life.

[@RCKnockout]

Yeah I’d agree that the 2wd takes much more finesse to drive…..and it struggles in tall grass….also it doesn’t have the pull out of corners that a 4wd machine has…

[@tmar352]

@@RCKnockout 2wd is faster on pavement going straight, that's why ppl use it as a dragster

[@RCKnockout]

@@tmar352 actually I think the 4wd still launches a lot harder than a 2wd does….if someone were to build a 4x4 drag car it could probably still launch harder than a 2wd drag car can….I think the only reason they designed it that way is cause it’s more realistic

[@tmar352]

@@RCKnockout I know that the 4x4 accelerates better because it has more grip. The two wheel drive has a better top speed though because all the power is just going to two wheels. Once you put drag tires on it takes off a lot better and then you get the benefit of the top speed

[@RCKnockout]

@@tmar352 maybe idk….I think overall you can get both of them to go pretty similar top speeds

[@K_Nasty]

I got "my son" a 4x4 vxl rustler and I have a souped up 2wd stampede.. I put some part from the stampede on the rustler but want to put it back together so we can "race "lol. Anyway im thinking of just making it a slash with the lcg slash kit . but if im starting with a stampede not a slash what else would I need. Ive only found that id have to get a slash steering rack . and body ... Am I forgetting something???

[@RCKnockout]

I’m not aware of the exact differences between the Slash 2wd and Stampede 2wd….I know some of the parts are interchangeable but I don’t know all of the differences…..sorry I couldn’t be more help

[@jaysonflores3610]

I just realized I found ur channel from your video installing the shock towers on the 2wd slash😭 as soon as I watched the video I bought em.

[@RCKnockout]

Did you have the fitment issues I had with mine?

[@jaysonflores3610]

@@RCKnockout thats another thing that was weird I didn’t have any fitment issues at all, cause I was fully expecting to run into problems after watching your videos because u stated there was an issue. I just thought to myself ehh why not try it cause it’s a lot cheaper than other option out there, and they just worked perfectly. I bash mine a ton to cause I take my cars to the track.

[@RCKnockout]

@@jaysonflores3610 gotcha. Yeah my rear shock tower was pretty off. I’m glad you had better luck with yours!

[@VikingDudee]

idk, I have a 4x4 stampede and revo, but I still love my 2wd slash, I don't have issues with the roll overs after tuning shocks. I also have never had issues with rear shock tower, I have had issues with the front casters, but easy fix.

[@RCKnockout]

Mine broke when it was cold out. Do you live in a cold climate? I think when it’s warm it’s not as big of an issue.

[@VikingDudee]

@@RCKnockout I live in north east Ohio so it gets cold and I have run it at round 30f many times. I don't jump it much. And unfortunately I work a lot now so I don't get time to run it like I use to.

[@RCKnockout]

@@VikingDudee gotcha. Yeah jumping it is definitely what would cause it to break on a hard landing

[@tonycope8155]

I have both those trucks I have the vxl 2wd and the vxl 4x4. In the snow I have way more fun with the 2wd I put a set of skis on the front and put paddle tires in the rear for the snow

[@RCKnockout]

Nice! I have no experience with skis or paddle tires but it sounds like fun! I do wanna get paddles for my slash though at some point

[@tonycope8155]

@@RCKnockout I had a set on the 4x4 and I kept getting it stuck in the snow the northern part of Canada I live in always has about 3+ feet of snow so I found the paddles and the skis worked the best.. summer time though it's all about the 4x4

[@RCKnockout]

@@tonycope8155 wow! So the 2wd with paddles don’t dig in as bad? Is there a hard surface of the snow on top?

[@tonycope8155]

@@RCKnockout it depends the colder the day the snow gets a layer of ice that works the best with the setup because less chance of digging into the soft snow..I have never tried it in snow that's not to deep I just bought the 2wd before Christmas and with this pandemic going on we can't go anywhere where I am we are in a big lockdown still tell March 9th I want to take it to a place that doesn't get as much snow as where I live and try it out

[@RCKnockout]

@@tonycope8155 that’s a bummer that you on lockdown til March. Maybe there will still be snow come March so you can still run it.

[@Flight6677]

Good job with the explanation. Traxxas has too many options! They need to dumb it down and standardize.

[@RCKnockout]

No problem! There is so much stuff I still don’t know lol 😂

[@ChaseK2415]

There is a simple solution with the 2wd high center of gravity chassis. Just have a buddy who also has a 2wd slash drive his car over and flip your car back over it’s crazy how good slashes flip each other back over lol

[@the63man]

have both a basic 2wd and a 4x4 ultimate and can have just as much fun with both. bashing only ofcourse

[@RCKnockout]

Agreed!

[@dackoson27]

So good vids dude, keep up the great work. I love projects with slash because i have one 2wd and i realy realy wan't the vxl sistem but it costs 200 so im gonna have to wait for cristmas so that is a long time and i have my birthday one day before cristmas so thats good.

[@RCKnockout]

Nice! If you do buy the VXL system off of eBay. You can usually find it cheaper. More like $130-$140.

[@nkastis8211]

They have a stock slash with the LCG chassis its called the Traxxas Slash Unlimited...

[@nkastis8211]

Or actually could be called the Platinum edition not the Unlimited edition Slash... I forget but one of those is the edition that comes with the LCG chassis stock!

[@RCKnockout]

@@nkastis8211 yeah that’s not a 2wd model. I was referring to the 2wd model specifically. That is a Traxxas Slash 4x4 Ultimate basically with an unpainted body and no radio system included

[@blackdogproductions2044]

fantastic video!!!! Exactly what I wanted to hear. Thanks

[@RCKnockout]

Glad it was helpful!

[@robschierbaum]

Great video my friend. Thank you for all the tips and trix.

[@RCKnockout]

Thank you!

[@jdm.drifter8406]

1 year later and now the drag slash comes with an lcg chassis in black too

[@RCKnockout]

Yeah the drag slash does but I still don’t think they do for the other RTR Slash 2wd models

[@Supaslow5.3]

It’s crazy the vxl kit for slash 2wd is more than what I paid for my whole rc

[@RCKnockout]

Yeah it’s definitely not cheap

[@alexnava7664]

Traxxas has the power upgrade program i think it you turn in your old esc and motor for the new vxl 3s upgrade..but yeah its not cheap..

[@RCKnockout]

@@alexnava7664 yeah it’s probably a better idea to find the system on eBay. It will cost less than directly from Traxxas

[@alexnava7664]

@@RCKnockout my hobby shop sells the new 4 poll vxl 3s for $169...yes sir

[@RCKnockout]

@@alexnava7664 I think I got mine for $135ish

[@Crypto_Brandon]

Do you think the slash ultimate is worth the $100 price difference considering what you get

[@RCKnockout]

@@Crypto_Brandon it is if you want all the aluminum upgraded parts…like the GTR shocks, Aluminum Hub carriers and Steering knuckles, also I believe it comes standard with Telemetry

[@Crypto_Brandon]

@RCKnockout it's sold out on the traxxas website.. It's available other sites. I think Traxxas biggest downfall is not having enough body designs

[@marco310977]

I have the 2wd and i put a castle sidewinder on it...woow

[@RCKnockout]

Nice!

[@thunderbomb515]

Do they sell a 2wd Slash with TSM? I am looking at buying my daughter her first hobby grade rc. Thank you so much!

[@RCKnockout]

@@thunderbomb515 yeah they do but only with the Vxl Brushless models…you can’t get it with the xl-5 brushed models

[@thunderbomb515]

@@RCKnockout Thank you for the response. I think I am going to buy her the vxl 4wd slash with the TSM. more than I want to spend, but that is life! Lol

[@RCKnockout]

@@thunderbomb515 glad to help! The 4x4 Slash vxl is definitely a good choice!

[@RC_guy667]

Sooo, I had a 4x4. I have a 2wd now that I put a brushless in. I tried to use a 3s in it....it literally too flight and flipped going straight....any way to fix that besides a wheelie bar?

[@RCKnockout]

I run a Baja bug body on mine now…..doesn’t catch the air as bad

[@CT-pc3rh]

Bro please do a video on the Traxxas Slash two-wheel drive RTR xl5 and the Traxxas Slash XLV 2 wheel drive I have upgraded all my stuff on the RTR xl5 the millennium servo and motor and now doing the axles but what else is different

[@RCKnockout]

The main difference is the esc and motor. They should have the same 2075 Servo unless they’ve changed it since I bought mine. The Tsm receiver and Tqi Transmitter is different from the Tq one. Wheels and tires could be slightly different too. That’s basically it though….I could be forgetting something though

[@CT-pc3rh]

@@RCKnockout okay so I upgraded mine to everything that came on my friend's truck and still came out cheaper than what he bought his for which I thought was kind of crazy but love your videos

[@RCKnockout]

@@CT-pc3rh thanks! How did you build it for cheaper than your friends Slash?

[@markoftheus]

The transmission is also different. The 2WD VXL models now come standard with the magnum 272R transmission while the XL-5 models still use the older magnum 272 transmission. *Just a heads up, a fully assembled magnum 272R transmission runs at about 140 dollars.

[@samcourtrc6767]

Video was brilliant bro

[@RCKnockout]

Thanks! 😉

[@christiantrevino8378]

I have the ultimate version. I switched over to proline trencher 2.2 and regularly go back and forth between 2c and 3c lipo on VXL system. I took out the slipper clutch and now have a center differential 54t and stock 13p gear. Dual fans on motor and fan on esc. I’m more of a on road guy but love off-road as well. What’s you’re opinion of changing to a 14p or 15p gear and run that all the time? I want a touch of more speed but not to kill the vxl. Just safe enough

[@christiantrevino8378]

Great vid by the way!

[@RCKnockout]

@@christiantrevino8378 thanks! 👍😉

[@RCKnockout]

You’d probably be alright for bashing. The high speed gearing I think is an 18t pinion isn’t good for bashing. I had lots of cogging problems. Even on the road actually. But gearing it up a tooth or two might still work for bashing.

[@christiantrevino8378]

@@RCKnockout did you happen to see if you lost any battery run time running those badlands versus the stock tires?

[@RCKnockout]

@@christiantrevino8378 not really. I do think since they are beefier tires overall. The front ones are actually slowing me down especially in the snow. Not to mention these are technically 4x4 slash tires that aren’t supposed to be mounted on a 2wd. But I think the rears help with grip significantly

[@saularrieta9969]

What motor did you upgrade your 4x4 with

[@RCKnockout]

I think it was a 3600kv Surpass hobby motor at the time of this video….I’ve since swapped to a different setup

[@Hoosierdaddyjones812]

Damn just looked a 2 wheel drive slash yesterday and they are priced at 229 now

[@RCKnockout]

Yeah I’ve been told the price has jumped up since making this video

[@rogerchevelle7231]

What do you reccomend for bashing? Hcg 4x4 or Lcg?

[@__jon__22]

HCG

[@RCKnockout]

High center of gravity

[@macdaddy5326]

What kind of motor is that on the 4x4 model and how much faster does it go? late comment

[@RCKnockout]

It’s a Surpass Hobby 3665….3500kv…..probably gains a few mph over the stock motor

[@christopherrice1375]

Great video. Very informative. Thank you.

[@RCKnockout]

No problem. Glad you found it helpful

[@dastoast5273]

I think swaybars could keep it from rolling

[@RCKnockout]

Yeah I’ve put sway bars on my 2wd since this video…..I can confirm that it does make it even better..I recommend both the lcg chassis and sway bars for the Slash 2wd

[@JERRYR708]

Plastic gets brittle in very cold temperatures and gets flexible in hot temperatures.

[@agustincruz2321]

@rcknockout Great vid!! Anyone knows the weight of the slash 2wd VXL box sealed?? I need to know that so I can import it to my country. Thanks!!

[@RCKnockout]

Thanks……probably 8-10llbs

[@miltonsanceno6970]

Do you recommend getting the metal drive shaft for the 2wd vxl?

[@RCKnockout]

I haven’t broken my stock ones yet actually. It depends on what brand you’re talking about?

[@miltonsanceno6970]

@@RCKnockout I just got a Traxxas Slash vxl yesterday, it’s my first rc car so I don’t know much about them or anythint about them. but I found your video very informative

[@RCKnockout]

@@miltonsanceno6970 I’d say it’s best to run it and upgrade as you break stuff. I’ve been pretty impressed with the stock driveshafts on the 2wd Slash so far though. I’m definitely not easy on it! Lol 😂

[@miltonsanceno6970]

Okay great thank you I appreciate it

[@RCKnockout]

@@miltonsanceno6970 no problem 😉

[@brickshot3564]

If you see this can you tell me a good way to replace the rubber antenna cap cuz immune ran under a truck and I ended up losing it

[@RCKnockout]

Buying a new one makes the most sense…..I don’t really have a hack to use besides that…. They do sometime fall off too

[@brickshot3564]

Ok thx cuz I have the 2wd so I was thinking of also shortening the antennae so far all I did was tape the wire to the rubber tube

[@RCKnockout]

@@brickshot3564 no problem man! 👍😉

[@MightAsWellBeMe]

Nitro slash 2wd with some proline badlands beats both 😎

[@RCKnockout]

That’s all subjective

[@ChurrosSweet]

What should I buy?

[@n.j.crawler]

Great video!

[@RCKnockout]

Thank you!

[@brycen4111]

Where did you get it for 189.99 I can only find them for 229.99

[@RCKnockout]

AmainHobbies.com

[@Harley_ashtonn]

So can someone provide a link to upgrade the receiver on the slash 2wd as I can’t find it .

[@RCKnockout]

There should be many listings out there. “TSM TQI Receiver” . You do still need a TQI Transmitter as well. It won’t bind to a basic Tq Transmitter

[@Harley_ashtonn]

@@RCKnockout thank you so much for the response :)

[@RCKnockout]

@@Harley_ashtonn no problem 😉

[@itzzgraham]

Where can I find those shocks bros?

[@RCKnockout]

I believe I got them on Amazon

[@everythingisvibration]

Did you kinda turn it into a Rustler ????....

[@RCKnockout]

No it’s still a Slash

[@Taboloncawonthemasters]

Does the 4x4 vxl have a lcg?

[@RCKnockout]

No it doesn’t….only the Ultimate and Platinum

[@HighwayCowboy7489]

I broke a front axle on my 4x4 day 1 of running it.

[@RCKnockout]

That’s not surprising, especially if you were running 3s….I guess it’s time to upgrade 👍😉

[@HighwayCowboy7489]

@@RCKnockout oh definitely! This thing comes with some weak plastic parts. I have already priced new aluminum parts. Waiting for payday!

[@RCKnockout]

@@HighwayCowboy7489 nice! Definitely some steel driveshafts are a good upgrade

[@garynapoli3042]

I bought my/with the low gravity chassis I also had the rumble on it I forgot what it was called now 400 bucks five years ago 2wd

[@RCKnockout]

That works well when someone else does the work and you get a good deal!! I’m really surprised Traxxas hasn’t offered the 2wd slash equipped with the lcg chassis though

[@garynapoli3042]

@@RCKnockout No they did I have one it had the rambler on it that sounded like the real truck it came with the low center gravity chassis apparently they discontinued that straight out of the box with a 3500 motor

[@RCKnockout]

@@garynapoli3042 interesting…..I did not know that…..why would they discontinue it?

[@garynapoli3042]

@@RCKnockout Are you aware of the Traxxas/that had the built in speakers to the body you might be able to KZbin it I’m not sure it was a special edition when I bought it but they don’t make it anymore I still have the car I disconnected the speakers and now it has a buggy body

[@RCKnockout]

@@garynapoli3042 yeah I know what you’re talking about. “OBA” On-Board Audio

[@rcmindset2876]

Should say, what’s the same?

[@RCKnockout]

Nothing really… you can get the same optioned body and wheel and tires but everything under the body shell is different

[@gourobkundu2173]

I always prefer the 4wd.

[@RCKnockout]

In most situations I do too! 😉

[@kamillbadell3244]

What motor did you put in the 4wd

[@RCKnockout]

Surpass Hobby 3665

[@kamillbadell3244]

@@RCKnockout do you have a video on how to install it

[@RCKnockout]

@@kamillbadell3244 HOW to REMOVE and REPLACE a TRAXXAS SLASH 4x4 VXL 3500kv VELINEON BRUSHLESS MOTOR kzbin.info/www/bejne/gJXTY2ylp52JkNE

[@kamillbadell3244]

@@RCKnockout also I was gonna buy a 2255 steering servo for my car do you have a vid on that?

[@RCKnockout]

@@kamillbadell3244 no clue what servo that is

[@robertstaats535]

When I put the high speed gear in my 2wd and used a lipo battery I caught it on fire 🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

[@jaysonflores3610]

Ur esc overheated.... that’s what happened to mine because when u run 3s and the upgraded gear, if u don’t have an esc fan it will 100% catch fire on the first run. The motor had nothing to do with it cause the esc has a cutoff when the motor gets to hot which means it was the esc. Suggestion would be to get your new esc get an esc fan and if u wanted get a motor fan with a heat sink.

[@RCKnockout]

Bummer. The esc or the lipo itself caught on fire?

[@jaysonflores3610]

@@RCKnockout oh I barely read his problem I didn’t see that his battery went on fire, but yeah for mine the battery was completely fine I still use it lol. It was the esc because at first I lost all power on the trail, then I took it back home and tried turning it on and the esc started smoking so much and it basically got fried. When I went to the shop they said when u run 3s it is recommended that u have the esc fan....and when u run 3s with the upgraded gear, you NEED IT.

[@TeamOdiffat]

@@jaysonflores3610 hope you dosent have a normal xl5 since that’s rated for 2s?

[@jaysonflores3610]

@@TeamOdiffat nah I don’t lol I have the vxl model and it still happened

[@andrewsouthern3517]

Can you convert a 2wd to a 4wd?

[@RCKnockout]

No you can’t

[@markoftheus]

For how much time and money that would be, it would be much cheaper just to buy a 4WD.

[@lytmoplayzz]

i got a rustler 2wd and im not going to make this mistake again and by a slash 4x4 its a no brainer.

[@Crypto_Brandon]

The ultimate was 530 bucks now it's 499

[@christiansrcs7789]

What’s going on

[@mikeruizesparza1514]

2wd is for more experienced drivers. 4wd is for the rest

[@RCKnockout]

I believe you’ll gain a lot more skills learning on a 2wd Slash compared to a 4x4 model

[@mikeruizesparza1514]

@@RCKnockout Totally agree

[@yaduconodosor3834]

“That’s what she said”

[@theguy7488]

The traxxas drag slash comes with the lcg chassis

[@RCKnockout]

Yeah…..that wasn’t released when I made this video though….also isn’t it over $500….I think that’s outrageous for a 2wd Slash

[@cbossplayz3555]

I think you can find a traxxas lcg 2wd from the factory

[@RCKnockout]

I could be wrong but I don’t think that you can. You can look if you want

[@vinniemartinez6125]

Lol that's what she said lmfno lol 😆 🤣 😂

[@RCKnockout]

Lol 😂

[@joshlia6469]

1 thousands like

[@christopherkent7786]

3D printer bro, make yr own parts

[@RCKnockout]

I’m not sure if 3D printed parts are that durable though….it seems like a lot of 3D printed plastic is brittle….just my experience

[@christopherkent7786]

@@RCKnockout they have 3D printer's that are capable of producing product just as strong as metal now by using resins mixed with powder alloy's in the process, pretty sure you can find video's on it

[@RCKnockout]

@@christopherkent7786 thanks for the info! I’ll have to look into it …..how much does a decent 3D printer cost?

[@christopherkent7786]

@@RCKnockout 1 that uses alloy powders and resins to then be cured producing anything as strong as metals starts around 2,000 USD and if you wanted something that would be capable of producing more volume then you would just buy something bigger.... sky could be the limit

[@RCKnockout]

@@christopherkent7786 thats a lot of money!! $2000? I’m not sure if that purchase could be justified?

[@sf49erswarriorsgiantsgumba99]

All these cars should be 4WD, 2wd unless you’re on pave, and 4WD on dirt!! This is all marketing, to put a hole in your pockets!!😂

[@sf49erswarriorsgiantsgumba99]

The difference says it all on the title!! 😂😂😂 2wd is a piece of crap!!

[@CatchandcookMatt]

Say "body shell" one mo again.

[@steelthunder76]

Holy crap all of the rambling on