Great video- where can I source the bracket that you used to hold the filter and hose lines? Thanks!
@DavidWilks6 ай бұрын
It’s an aluminum 10” trailer bunk bracket. www.EasternMarine.com
@craigmitchell9555 Жыл бұрын
Hello David. I enjoyed your how-to video on this transfer tank install. I also have a newer Ram truck and want to add this capability and this seems to be the best way with out voiding my OEM warranty. Just a few questions: When you refuel your main tank, do you refill while driving? Or, do you need to be stopped on level surface to fill your main tank? How do you know when your main tank is full? I know this sounds like silly question, but usually the main fuel tank gauge has some lag time in reporting the actual level of fuel to keep it from showing slosh movement. Or do you even run the pump until the main tank registers full? Or shut off at 3/4 level on main tank so not to overfill? Does the OEM gauge follow the fuel level quickly so you can proactively turn off the pump to keep it from over flowing the main tank? How many GPM does the auxiliary pump provide? How long does it typically take to fill your main tank if it is empty? You are running a Racor R20S filter, that is 2 micron (as best I am able to tell from the Racor site), how does this 2 micron filter work for you, does it slow down the transfer rate? You polish the fuel if you so choose. How long to you do this for? While running? What is your interval for changing filters? Thank you for your time, please answer all questions, well done video.
@ottyoh37232 жыл бұрын
Educational fosure
@dwegs26652 жыл бұрын
Can you add a long for the pump and filter? Or part numbers? Can you also add information about the mounting bracket you used for the pump and filter/water separator?
@michaelhebert94812 жыл бұрын
Worrying about over filling the factory tank. Does the Rds tank install install kit ball valve in the T stop the delivery of fuel under pressure from the pump? Great info and want to add this system.
@upinsmokedoc Жыл бұрын
So Dave do you do these yourself far as installation and if so how much and what’s your location and can you also have a tool chest in the bed along with the gooseneck trailer
@DavidWilks Жыл бұрын
I do these installs but lately I have been moving yachts up the East Coast to NY and transporting others by trailer. LMK if you have any questions about what is needed and tell me more about the truck you have. David@AldenTransport.com
@upinsmokedoc Жыл бұрын
@@DavidWilks appreciate the response what’s are you based out of I would definitely like to get one installed
@user-xn2yx1wd6l Жыл бұрын
what size hose did you use for this? this is nicely done
@DavidWilks Жыл бұрын
The fuel hoses are 3/8" and the kit I buy for the ram is the 1.75" for the Chevy so you do not have to cut the aluminum pipe, only the rubber hose going to the top of the tank.