RDWorksV8 tutorial : Mark Point Positioning

[@YouTube运营咨询中心孟]

视频做的很棒，画质很清晰，点个赞，订阅了。多多上传更新哦～

[@antoniolamarca6094]

thanks for your videos! I noticed that when I repeatedly cut the same design, the cut tends to gradually move a few millimeters down the Y axis and therefore the cut does not always reposition itself in the same point. What could be the problem? Thank you for your answer!

[@shenzhenruidatechnologylim5388]

WhatsApp：[phone]

[@0Turbox]

What is your best controller for cutting acryl, does a camera help?

[@shenzhenruidatechnologylim5388]

We have a lot of non-metal solutions, you can browse ur website and buy the suitable one www.rdacs.com

[@brisacarrasco8889]

hello, I have a laser cutting machine with camera but I can’t find the camera in rdworks

[@babahcathouse1882]

you need to use rdmark vision

[@mikeekeocha2359]

Hi. Could you please advise me if RDD6584G controller will work with a camera. And what type of camera will it work with. I use vcutworks

[@shenzhenruidatechnologylim5388]

Mark point visual positioning cutting requires a vision controller（RDD6584V-NET） and a network interface camera

[@orel781330]

Am I right, that RDV6445 and USB SV300 camera not support MarkVision?

[@shenzhenruidatechnologylim5388]

Hi sir, RDV6445G can support feature recognition and mark point vision cutting.Maybe you can learn more by our WhatsApp：[phone].

[@24370larry]

Hello, it is not ok about engraving using marks.... camera seems use bottom left origin... user have different : example top right.. Changing on rdworks doesn't affect camera. Example insert origin top right on your software then use camera... mark x,y position are using bottom left origin! and so engraving provide issues... I saw same issue on your video : the marks position don't match the rules bed on rdworks !, so try to engrave the arrow using theses marks = the arrow will be engraved on a wrong position! @@shenzhenruidatechnologylim5388

[@sumitutekar6623]

Hello Ruida... I m using ur new version of of sv3000, but in repeated job, there is slightly shifting What will be the solution

[@shenzhenruidatechnologylim5388]

WhatsApp：[phone].

[@MirkoBrocato]

Hi I use Ruida on a cutting plane, no laser, for technical reasons I had to install the software again on a new pc, I saved all the old setup, everything works except the processing with mark reading, the camera recognises all the markers, but the processing does not start, could you kindly help me?

[@shenzhenruidatechnologylim5388]

WhatsApp：[phone]

[@pixamprinting]

Red point and cutting point show in different. How to adjust same position red dot and cutting pulse point

[@shenzhenruidatechnologylim5388]

WhatsApp：[phone].

[@vazecreative]

Why this tutorial is underated? i mean... hard to find...