RE Hunter 350 installed with Handlebar Risers | Full installation and review

[@intazsaikia-mototalesne287]

This video is all about the upgrade that I did to my Hunter 350 and its related to the handlebar. And, as such I have installed handlebar risers and that has actually increased the comfort levels. If the video is helpful do like, share and comment. Also, subscribe and press the bell notification icon for future updates. Thank you🙏

[@HASAGI556]

These handle riser made my riding more comfy totally luving it 🥰

[@benson8934]

do u feel any difference in vibrations ?

[@intazsaikia-mototalesne287]

Its a single cylinder motorcycle you feel lil bit of vibrations, no issues.

[@HASAGI556]

@@intazsaikia-mototalesne287 lol naaah brrr wat the hell you saying i dont even understand. 🤣

[@HASAGI556]

@@benson8934 no vibrations it's like you're riding stock bike made the ride more comfy.

[@YousufKhan-cz6rv]

Very detailed review. Hats off!! Very much useful.

[@intazsaikia-mototalesne287]

Glad to know that 🙏🏻

[@tpranjal3]

Very informative video. Keep up the good work👍

[@intazsaikia-mototalesne287]

Trying my best. Thank you 🙏

[@priyeshkparmar]

Now what is your experience after install it's vibrate handle and mirror?????

[@intazsaikia-mototalesne287]

The vibrations are bit less when compared to stock setup but the height of the handlebar is raised so more comfortable for long rides

[@arundeepsingha5441]

Been 3 months. Would you prefer the risers or considering to change it to Meteor 359 handle bar?

[@intazsaikia-mototalesne287]

Get risers, that's much budget friendly and you won't need to change the cables. Also Meteor Handlebar doesn't goes with the overall look of the Hunter, also you might need to change the clutch and throttle cable.

[@v.s.s.tharun392]

How reliable are those risers bro? Will it serve long-term? Also I see it's just 1inch risers, so after installation does it make our posture upright position which we have for clssic350. Please let me know..

[@intazsaikia-mototalesne287]

Yes, the riding position becomes more upright. And these are good quality CNC Aluminium risers

[@prasantamedhi]

those riseres sure looks good..

[@intazsaikia-mototalesne287]

Thankyou 🙏 In a tight budget so only 1-inch risers.

[@diku6]

The efforts put in to install the risers… I would rather go for carbon racing or Moto torque. Imagine if you have to remove it and do the process again!! Lots of time gone!!

[@intazsaikia-mototalesne287]

@@diku6 👌🏻

[@DeniPoyom]

brother in my RE garage they are saying me to change Clutch wire in order to add handlebar riser

[@intazsaikia-mototalesne287]

@@DeniPoyom I'm still using stock clutch cable with these risers, you can check the whole video

[@SajidKhan-xf2sw]

Did you feel any wobbling at higher speed while riding please let me know

[@intazsaikia-mototalesne287]

@@SajidKhan-xf2sw No

[@yadilmaangamore4634]

Bro can you tell me that any vibration in handle at 80 ?

[@intazsaikia-mototalesne287]

@@yadilmaangamore4634 Less vibrations compared to stock setup

[@siddheshpawaskar3151]

I saw three types of riser as of now. These ones, and inclined ones and also straight risers but to install them we have to remove the handle from it's company fitted bolts. I feel that may ruin the handlebar balance and angle.

[@intazsaikia-mototalesne287]

That's your perception, I'm using risers and the bolts that came with it and everything working much better even when compared to company stock setup.

[@smartytalk9910]

Nice video 💯

[@intazsaikia-mototalesne287]

Thankyou 🙏🏻

[@kushwanth7]

Is it comfortable? Any handling issues ??? Nice video

[@intazsaikia-mototalesne287]

Comfortable compared to before and much better handling

[@kushwanth7]

@@intazsaikia-mototalesne287 thanks for reply man

[@intazsaikia-mototalesne287]

I'm there to share my honest views

[@smartytalk9910]

Your action camera and mic ??

[@intazsaikia-mototalesne287]

Insta360 one RS, Sony mic

[@ratanaly2185]

where could i buy machine protector ?

[@techschoolcool]

I have installed carbon racing handle bar riser and throttle wire seem tight when locking to right side

[@intazsaikia-mototalesne287]

@@techschoolcool That one is a bit longer, so

[@akashsharma5784]

Can this be used for meteor 350?

[@intazsaikia-mototalesne287]

Yes it can be used

[@arundeepsingha5441]

I read a review in Amazon says it has no powder coating on it. Will this be an issue? If Yes, would you suggest a better alternative?

[@intazsaikia-mototalesne287]

Its made of aluminium, so no issues

[@deepjyotimitra1340]

Is there any chance of breaking the bar or any risk ?

[@intazsaikia-mototalesne287]

No

[@deepjyotimitra1340]

Thank you. One more question i have regarding the custom seat. How comfortable the custom seat is for both rider and pillion for long ride and also in city ride within 30km?

[@intazsaikia-mototalesne287]

@@deepjyotimitra1340 Much better than Stock seat tbh.

[@firojtech5678]

Where is the custom seat bro. Was it Good or not please reply. I want to install

[@intazsaikia-mototalesne287]

Its much better than stock seat, I love hard seat compared to soft seats, so I got it. First take a test ride with the custom seat, then go for it if it suits your riding style.

[@intazsaikia-mototalesne287]

I installed custom seat after installing the risers

[@roneymondal4011]

After handlebar Riser Vibration feel???

[@intazsaikia-mototalesne287]

Already the J-Series engine is smooth and after installing risers its much more less

[@snobodybutsomebody]

is it 1 inch or 1.5 inch?

[@intazsaikia-mototalesne287]

1-inch Risers

[@samitavamondal7432]

Please change the suspension to classic reborn otherwise touring will ne a dream

[@intazsaikia-mototalesne287]

Yes, thinking about that.

[@mokshith7211]

Bro what's ur height?

[@intazsaikia-mototalesne287]

@@mokshith7211 Not much tall, 5'4"

[@mokshith7211]

@@intazsaikia-mototalesne287 same bro even am 5'4, how's ur riding posture now, bit comfortable???

[@intazsaikia-mototalesne287]

@@mokshith7211 Its comfortable yet the sporty bit is still there due to these risers

[@deepjyotimitra1340]

Bro did you feel any vibration on above 80km speed?

[@intazsaikia-mototalesne287]

Yes, lil bit, very normal.

[@deepjyotimitra1340]

@@intazsaikia-mototalesne287 in stock handle do we feel the same?

[@TARUNSHARMA-nb6qm]

What's your height?

[@intazsaikia-mototalesne287]

5'4" 🌚

[@shubhammandal7229]

Installation charge 300 rupees 😮😮🤯🤯. I did it myself last month 😅😅. Life is a DIY project 😉

[@kushwanth7]

Bro, today i installed these risers . Whenever i go in pothole , the kichak kichak sound is coming... Is it common bro??

[@intazsaikia-mototalesne287]

No, I don't have any sound. Check with the mechanic who installed. There must be some lose bolt.

[@kushwanth7]

@@intazsaikia-mototalesne287 ok bro

[@akhilbhatia7211]

Clutch wire mai koe dikkat to nhi aa rhi . I mean wire got stretch

[@intazsaikia-mototalesne287]

No issues with clutch cable

[@rakshithmk815]

mobile holder link?

[@intazsaikia-mototalesne287]

Actually testing one, but here is a link you can check amzn.to/44vw9EB

[@lalliana1766]

Hey bro can you give me the link to purchase the crash guar similar to your video

[@intazsaikia-mototalesne287]

mototorque.in/products/astra-crash-guard

[@lalliana1766]

@@intazsaikia-mototalesne287thsnk you

[@sumankumarsingha4015]

bro dont take it personally, either you speak perfect english or you use hindi in your channel, sometimes it is difficult to comprehend your english speaking. if you use hindi i think you will have more viewers like others.

[@intazsaikia-mototalesne287]

Don't mind you can unsubscribe and and start your own channel where you can speack perfect English. I don't want useless people like you watching my video ☠️

[@Bluesmiley05]

Bhai hindi mein bolo

[@intazsaikia-mototalesne287]

After uploading the video 🙃