Reactor Modules | Methane Combustion in Aspen HYSYS | Conversion Reactor | Lecture # 29

AspenTech channel has brought another exciting video for you, in which we will discuss about reactor simulation in Aspen HYSYS. 1st example is focused on combustion of methane to produce water and carbon dioxide, for which conversion reactor is used. Please do watch, like, and share the video, and subscribe the channel. Thanks for your love and support. Stay Tuned.
1. Objective:
a) Methane combustion in Aspen HYSYS
b) Use of Conversion Reactor
2. Problem Statement:
a) Fuel i.e., Methane at 25 °C, and 4 bar is fed to the conversion reactor at 1.013 bar (after reducing its pressure using valve).
b) Air at 25 °C, and 1.013 bar is fed to the conversion reactor. Assume 10% excess air in the feed.
c) Estimate the % composition of the product stream.
d) Estimate the energy available for burning of fuel.
3. Reaction:
CH4 + 2 O2 = CO2 + 2 H2O
4. Mole Balance:
1 mole of CH4 requires 2 moles of O2. In 1 mole of air, 0.2 moles of O2 are present i.e., for 2 moles of O2, we require 10 moles of air. Since, excess air is 10%, so total amount of air required is 11 kgmole/h for the combustion of 1 kgmole/h of fuel.
#Methanecombustion
#Conversionreactor
#AspenHYSYS

[@muhammadyasir9056]

Very helpful, doing a great job 👍

[@aspenchemchannel]

Glad to hear that!

[@Beero.diaries]

Very helpful and easy to understand.

[@ericbirchall6916]

Thank you for this video

[@aninconspicuousgentleman7516]

This is very helpful, thank you.

[@attarnaved7353]

Thank You so much sir...

[@aspenchemchannel]

Thank you!

[@narmanaeem1911]

👍

[@nasirkhan3711]

Thank you very much for the tutorial but can I ask why Nitrogen in the product stream is less than 0.80 in mole fraction. Nitrogen is inert. if it didn't participate in the reaction then why it is 0.733 in product stream and not 0.80.

[@aspenchemchannel]

If we talk about the total molar flow, it will remain the same. However, the mole fraction may vary, because of changes in the process.

[@blackbow6526]

A suggestion I'd like to make is that you can include short assignments

[@aspenchemchannel]

That's a good suggestion, my dear. Surely, that will be incorporated in the coming videos. If you have particular queries, please do inform so a video can be made on these. Thanks.

[@stoicism-101]

can you do a simulation using Grayson Streed fluid package