Read repairs

Following the disassembly and analysis of out three-train fusee spring clock movement, we begin a series of shorter videos dealing with identified repairs. Here we bush (new bearing) to the hammer arbor to reduce end-shake, improve the action and add a brass pad to the stop to rotate the 'parked' position of the hammer.
#clock #repair #righttorepair #making #craft #lathe #shop #workshop #horology
Barette file
www.cooksongol...
You can learn more about the process of bushing here...
www.amazon.co....
We have much more digital content plus a Facebook group to support beginners in clock repair.
Our digital content is free-to-attend and open-to-all. If you can support us in any way, you can donate via PayPal which greatly helps us continue our work.
Here is the link www.paypal.me/MReadConservator
Here are some links you might find useful
How to repair pendulum clocks KZbin channel / @howtorepairpendulumcl...
‪@howtorepairpendulumclocks‬
Open Clock Club archive
/ @openclockclubarchive325
‪@openclockclubarchive325‬
How to repair pendulum clocks LIVESTREAM archive / @howtorepairpendulumcl...
‪@howtorepairpendulumclocks-live‬
Facebook group
/ 424742035582369
www.clockmaker-conservator.co.uk
www.howtorepairpendulumclocks.co.uk

[@brianwarburton4482]

Thanks Matthew. This is a great series.

[@readrepairs]

Thank you for watching!

[@howtorepairpendulumclocks]

Yes! End-play, float, end-shake,,, all good. M

[@jbranstetter04]

It can also be called end-play.

[@markuk7935]

👏

[@oldtimer4863]

If you measured the correct thickness of the bush you wouldn’t need to use a file. That is very bad practise and not recommended. Using steel wool on the inside of the bush creates marks, this means you will need to burnish the inside of the bush. Again very bad practise. There is a reason why the part has been bent, by altering the width of the plate by have the bush protruding from the plate means you have changed its originality.

[@jonka1]

What would you have done to reduce the end shake?