I really want one of these,i was put off by the factory performance,but seeing what YOU did I'm getting one. Blessings from Ireland 💚🤍🧡
@ReadytoRunRC16 сағат бұрын
@@EireFirst2024 it rips now and is awesome. Box stock is not a lot of fun. The Gorgon is great though and it really is ARRMA tough.
@xNicholasWolf9 ай бұрын
3674 size motor fits in there very comfortably. is a little hard to find them in a KV above 3,000. will probably want a set of 5mm 32p pinions and maybe even pick up a 50 and 55 tooth 0.8mod spur. ARA311103 and ARA311112. since there is not much wiggle room to adjust the motors for pinion gears you may find a need to switch both gear sizes. That said it's a tight fit but a Traxxas VXL will fit in there too, as long as the wires are facing the axles. VXL is a 3656 can size and is uncomfortably tight so if you're motor shopping I'd look for 36diam 60+length sized motors. Also definitely worth it getting a 40mm fan bolted to the provided mount. hope that info helps someone out there lol.
@ReadytoRunRC9 ай бұрын
Thanks for the helpful tips. This one I put on is a 3660. I should’ve gone with a 15T pinion. I do want to get a fan for the motor since they made that mount for it right on the chassis.
@rigosuave183 ай бұрын
Definitely helps. Good info!!
@karlsonmackay1453Ай бұрын
After watching you upgrade this thing so well sir I just want one now 👍🏼
@ReadytoRunRCАй бұрын
@@karlsonmackay1453 it’s a great truck and even better now brushless.
@wvflying16269 ай бұрын
Wow, what a punch.
@ReadytoRunRC9 ай бұрын
Has some power now.
@ramsessilent9 ай бұрын
so much torque! thanks for the share! stay awesome!
@ReadytoRunRC9 ай бұрын
Thanks! I’m getting a 4S battery delivered soon to fit so I can’t wait to see what that does.
@ramsessilent9 ай бұрын
@@ReadytoRunRC i needs to get a dam charger i have orders 4 over the last year 6s and down and they keeping on the hook for 2 to 3 months and then refund my money tried ally and banggood 2 times each now im just going to wait until jan after my birthday and spend the extra to order one from amazon
@Blast215RC9 ай бұрын
The Granite wheelie bar fits the GORGON. Mine is still stock running a 7.6 volt 2s lipo.. with the wheelie bar it's way better.. - confirmed 👌. Nice set up by the way. This trucks drives amazing
@ReadytoRunRC9 ай бұрын
Thanks. Yeah I want to order one. It just flips back way too easy now. Going to rip the back of the body off eventually if I don’t.
@Blast215RC9 ай бұрын
@@ReadytoRunRC Gorilla tape the inside of the body. That's what I'm doing. The body for these is 60$ still. Lol
@Blast215RC9 ай бұрын
@@ReadytoRunRC ARA320613 IS THE PART #. Bolts right on. It's like 15$. Well worth it. 👌
@ReadytoRunRC9 ай бұрын
@@Blast215RC I’ll be ordering one next Amazon order. Thanks for the info.
@jameswisecarverАй бұрын
I run the same exact setup except I run a 15t pinion, plenty fast for a 2wd, I run 2s most of the time more than enough for a bash!!
@ReadytoRunRCАй бұрын
@@jameswisecarver yeah 15t is probably the best way to go. I run 3S and there’s a lot of wheel spin. The 15t would definitely slow that wheel spin down a little.
@ToyotaGuy19719 ай бұрын
Now she can do backflips! Durable, too!. Big like! 🙂👍
@ReadytoRunRC9 ай бұрын
Finally! Can’t wait to see what it does when I get my 4S battery delivered.
@ToyotaGuy19719 ай бұрын
@@ReadytoRunRC So that can be driven in 2WD or 4WD? You can switch between the two?
@ReadytoRunRC9 ай бұрын
@@ToyotaGuy1971 it’s only in 2WD.
@ToyotaGuy19719 ай бұрын
@@ReadytoRunRC Okay, thanks bro. I had looked it up, and the description in the listing I was looking at, had it listed as 2WD and 4WD, so that confused me.
@MrScottgp3 ай бұрын
"hopefully it's long enough"
@rctd32602 ай бұрын
“This shaft is much bigger than the other one” 💀
@user-es7dm2gt5g9 ай бұрын
Nice
@THESERGEANTJRC9 ай бұрын
Nice!! I went with a 3660/3700KV Hobbywing system with a 120amp ESC. Super fun!!!!
@TossDatBacon699 ай бұрын
Hows it? I wanna use my wp10bl120g2 and 3652s 4500kv
@THESERGEANTJRC9 ай бұрын
I like it! That’s the esc I run the one you want. Fast good for stunting and stays cool because the truck is so light and I mounted a fan! Check my videos out on this truck you’ll like them!
@xm3ntal6205 ай бұрын
Does the motor fit without any modifications?
@xm3ntal6205 ай бұрын
Also what size pinion shaft do you need?
@ricardocavaco53387 ай бұрын
Boas...esse esc da para 2s e 3s?no site fiquei na dúvida? Obrigado. Grande rc que voce é! Recomendo!!
@purplmoke756 ай бұрын
Confused on why some of the leads are backwards blue orange? Orange blue? And then later in the video all leads blue blue orange orange…..
@ReadytoRunRC6 ай бұрын
I’m confused as to where you see the same colors connected to each other later in the video. The way they’re connected when I installed the motor is the way they are now. I never changed them since I installed the motor. The reason the colors don’t match is because the motor rotation was reversed. So when I throttled forward it went in reverse. So if you switch 2 of the connections it will change the motor rotation.
@t3floz2 ай бұрын
Good video! I have 2 traxxas 1/16 brushless systems. Would 1 work in the Gordon?
@ReadytoRunRC2 ай бұрын
@@t3floz thanks. I highly doubt it. The motors most likely aren’t going to match up to the motor mount. This is a 1/10 and is much bigger than any 1/16 scale motor could handle too.
@t3floz2 ай бұрын
@@ReadytoRunRC thanks that’s what i thought
@robertshelton26057 ай бұрын
I think the lower kv was giving you all that punch or torque. Higher Kv gives more wheel speed less torque.
@shawn32186 ай бұрын
i just got everything and this is my first rc. i forgot to get the 5mm pinion, is that necessary?
@ReadytoRunRC6 ай бұрын
It is if you put this same brushless motor on. The stock pinion will not fit this motor.
@shawn32186 ай бұрын
@@ReadytoRunRC oh shoot i guess imma need to run to rc store again lol 🤣
@ReadytoRunRC6 ай бұрын
@@shawn3218 yeah it looks like you are. The motor shaft on this motor is 5mm diameter and the shaft size on the stock motor is I believe 3mm.
@shawn32186 ай бұрын
@@ReadytoRunRC so basically I bought everything on the links except the 5mm pinion do i still need to buy anything else? I hope you respond! 😩
@shawn32186 ай бұрын
Did u used the stock spur gear?
@ReactionRC9 ай бұрын
Was it a 3660 or wat size was that spektrum motor? 3660 fits as well. The hobbywing 10bl. Great video!
@ReadytoRunRC9 ай бұрын
It was a 3652.
@ReactionRC9 ай бұрын
@@ReadytoRunRC ok cool! Thank you
@ReactionRC9 ай бұрын
The one that fit? I meant the one that ended up fitting. Was it a 3660?
@ReadytoRunRC9 ай бұрын
@@ReactionRC the one that fit was a 3660
@ReactionRC9 ай бұрын
@@ReadytoRunRC Awesome thank you!
@owen85384 ай бұрын
Pinion need be the other way round as for some reason it hits the plastic
@ReadytoRunRC4 ай бұрын
That is correct.
@paulmaldonado70396 ай бұрын
Dude I heard that brushless motor is to much power for the gears 😮??
@ReadytoRunRC6 ай бұрын
It could be. Haven’t had an issue with it yet. Maybe if it was a higher kv motor it might create an issue.
@TossDatBacon698 ай бұрын
Its not going to be much faster if you dont make that pinion gear any bigger
@ReadytoRunRC8 ай бұрын
Or have a higher kv.
@TossDatBacon698 ай бұрын
@@ReadytoRunRC i have my gorgon with a 3660 same motor and kv and im running the stock spur with a 24t pinion...on 2s is did 43mph its that tiny pinion lol
@ReadytoRunRC8 ай бұрын
@@TossDatBacon69 I’m not going much bigger but I have a 15T on the way. I still want a little bottom end snap.
@TossDatBacon698 ай бұрын
@@ReadytoRunRC i still have alot of bottom end snap lol need a wheelie bar
@InaMopar8 ай бұрын
@@TossDatBacon6924t fits good?
@somefuckingprick7 ай бұрын
A 3665 motor fits perfectly in the Gorgon
@ReadytoRunRC7 ай бұрын
Ok and so does this.
@somefuckingprick7 ай бұрын
@ReadytoRunRC Ummm, okay-- Well maybe your viewers would like to know a trouble-free size that fits other than a pricey Spektrum system🤷♂️🤷♂️
@ReadytoRunRC7 ай бұрын
@@somefuckingprick which is also why I mentioned the size that does not fit and a size that does so if they would rather not use a spektrum setup, they at least know what size motor will work and they can decide from there which brand motor they want to use. Thank you for letting them know that a 3665 motor will work as well.
@AlphonsoSnorkelli-dg2qb4 күн бұрын
3s, 4300kv, 120a esc, wheelie bar... zoom.
@ReadytoRunRC4 күн бұрын
@@AlphonsoSnorkelli-dg2qb that’s what’s going in my fury when I get one.