Real Building Project Design in Prota Structure 2021

[@allfooballgoals]

Just shared this in my class group and my mates are loving your efforts. Truly thank you.

[@Decodebd]

Awesome, thank you!

[@basalttrap4035]

With your helpful video I have mastered in many software. Hope one day I will be able to work with person like you. Thank you sir.

[@Decodebd]

Thanks. Best of luck!

[@basalttrap4035]

Thank you sir and it's my pleasure sir 🙂🙂

[@rowlexkiprono6396]

This has opened my modeling insight on Prota structures

[@azmat_waseem]

Very Informative... Thank You...

[@shaharulislambd]

Congratulations via.Apni CUET ar akjon asset.

[@Decodebd]

Thanks a lot. Jajak Allah Khairan. Please keep me in your prayers.

[@aliben9]

Thank you so much Sir for your Good Work..May you Please start tutorials on the design of bridges too as per BS5400 ...may Allah Bless you Abundantly...

[@mohammadsahibwatanmal5659]

Very good work ❤

[@mostafaelbaroudy471]

AUTOCAD FILE PLEASE

[@ameyawclintonowusu5595]

Please are you assuming the loads on the slabs?

[@niamatullahshinwari4841]

Please sir, do the same design in Etabs also... And give your opinion about the result variation.....

[@gannareddy4828]

can porta structures support IS Codes like IS 456:2000, IS 875...etc

[@xiaogangpeng9503]

It's helpful for me ,thanks a lot.

[@alexi25]

Sir the video was great thank you

[@amrmasoud5580]

Hi I ask you what is the best sofwtar for design: prota or etabs or advance design or>>>>?

[@rodneymoyo13]

This is some good work sir, thank you so much.

[@Decodebd]

Most welcome!

[@engabdiwaliahmed7717]

well under stood with thanks but still i have more explanation about loading specially live loads

[@Zorot99]

In the firm I work with we don’t design the flat slab, but we do design all the other members. Do I have to turn on “slabs to be meshed” ? I get different results when I turn it off or on.

[@dineshedirisooriya1992]

Great vedio done by you. Pls do a building with two level foundation using a retaining wall.

[@hemed4064]

Excuse me Sir, please do you have a video for how to do GA with Prota 2021, I am a beginner Sir. Thanks. And please what other videos do you reccomend of prota 2021

[@mdatifmaniyar6641]

Sir please make a video comparing etabs and rcdc design results using is code.

[@S.K.Y93]

Hello, is there a way to input a blockwall in ProtaStructure without it being a wall load? So the wall can support a belt beam

[@kemdirimmunachi3112]

Why would you want a masonry wall to support a structural member?

[@TradeSmartHQ]

I understand him,as a load bearing wall it helps on steel minimisation

[@johnmuga6284]

You are very good.

[@ahmadalmosa9397]

How did it show center of mass and center of Rigidity?

[@tanverhossain612]

Dear sir, Can we use this software in Bangladesh..? the result of this software acceptable? actually in Bangladesh engineers are very much used to Etabs.

[@allfooballgoals]

Hi decod BD, May you please throw more light on Slab doesn't contribute to the floor diaphragm. Thank you

[@calvoh9715]

it does not contribute to lateral load transfer, like those of stairs case. Floor slabs are always a route for wind loads to the shear walls, hence need to be defined.

[@umarmodibbo7706]

What is the advantages of being a member. Thank you

[@olufemijibade2174]

Does prota has options of setting releases like etabs or it's assign releases automatically

[@drabdelbagi733]

Hi friend Can you help me icave proplem in building analysis. The message is increased model stiffness

[@satya7514]

Sir which software is used in this video to making the desing....

[@johnmolefe3380]

analysis can be carried out when all storeys populated. models with empty storys cannot be analyzied error. help

[@mra2878]

Is Indian standard code available in this software....

[@amadidominic4955]

Can multiple floors be imported in ProtaStructure, i.e when designing and the floors are not the same

[@MasterCivilEngineering]

Good video💯🇺🇸🇺🇸

[@Decodebd]

Glad you enjoyed it

[@mr.everything6794]

Please make tutorials from Robots. Your video are awesome

[@Decodebd]

I have tutorials on Robot also. Please check playlists on my channel.

[@apetebuildingcivilconstruc3188]

how do you set the descriptions to show weather the bar is a B1,B2 OR T1,T2

[@saigangadhar5224]

Does Porta structure has indian code and also I have a doubt is indian code and American code are same

[@relaxingmusicalvideoschann928]

good sir, what anout doors and window openings

[@Decodebd]

You can create opening for door & window, but I don't prefer that. Because door/window also has few weights. It is safer to consider more loads than considering less load on structure, you know.

[@mubaraakaliyumuhammad8743]

what is pb please?

[@mostafaelbaroudy471]

very good

[@dharmeshvankar2444]

It on India code like is 456 ?

[@mahmudlehassan]

It would be great if you provide the floor plan

[@allfooballgoals]

Use your eyes bruv.

[@bashiromaraden3490]

Sire, thank you bro, can you give me protastructure setup link?

[@abdulsalamibrahim3045]

This is great sir Thank you for the good works Pls can we get the floor plan so as to follow the design step by step

[@kenuteh3003]

😂🤣

[@santoshkumar-iw4lz]

Hi sir can we draw sunken slab in etabs?? Please help

[@mohamedsait4781]

Can we design as per is code in prota structure

[@jungleboytito7330]

Thank you.

[@Decodebd]

You're welcome!

[@joby6760]

Etabs or Prota, which one is better to be learned?

[@Decodebd]

Both are great. Prota is unique for it's complete package.

[@jahedulalam566]

@@Decodebd Vai, support reaction একই কিন্তু Area of steel ভিন্ন হয় কেন? যেমনঃ বিল্ডিং এর middle column এ support reaction 200 kip, area of steel 5 inch square, আবার সিঁড়ির পেরিফেরি column এ support reaction 200 kip, area of steel 8 inch square।

[@jahedulalam566]

@@Decodebd Vai, support reaction একই কিন্তু Area of steel ভিন্ন হয় কেন? যেমনঃ বিল্ডিং এর middle column এ support reaction 200 kip, area of steel 5 inch square, আবার সিঁড়ির পেরিফেরি column এ support reaction 200 kip, area of steel 8 inch square।

[@timothyadem8354]

What if ones staircase is not having a landing beam.

[@akinlabistephen4115]

Hi sir, please can I get the AutoCAD file you used for this tutorial.

[@manipurtastefuntechmedia6783]

Sir my prota details automated drawing generation doesn't work

[@manipurtastefuntechmedia6783]

Please help

[@bolaoresanwo6411]

please can you do stage construction analysis

[@Decodebd]

Will try in sha Allah

[@chaiyachairop3040]

Apreciate

[@Hussam07]

Thanx a lot, If it okay could you share the Cad file

[@ghassan3870]

From your experience with many software which one is easier and accurate and most useful to learn (RFEM or Robot or Tekla SD) since prota is not easy to get.

[@kanyesigyehilary6154]

How do you download that version of prota 2021 with a crack?

[@meenakshilandge9104]

Sir is the software set up easily available?

[@ashutoshchaurasia2802]

i think this software is not suitable for indian code because when he was choosing british code in starting there is no option of indian code in the table

[@vinhvu6475]

i don't understand d data when you draw console slap

[@talha4810]

How to get your service

[@samseg7743]

The 2021 version is not economical when design the pad footings

[@mostafaelbaroudy471]

What is the maximum number of floor he can solve?

[@Decodebd]

Unlimited floors if you have Enterprise Licence.

[@hussanakbar8017]

salaam sir i have visited to your google drive to download some excel sheets the payment pattern was on PayPal and just i selecting my country Pakistan but their was no option to select Pakistan if you have another way for a payment so tell me......thank you

[@Decodebd]

You just need to have paypal account. Then you can send money through the website you visited for excel.

[@hussanakbar8017]

@@Decodebd yes sir

[@fridayicherene9742]

Protastructure building design warnings corrected here kzbin.info/www/bejne/p4Cndq2nr9aJrM0

[@hasenkassaw128]

Cad file attach

[@phytoplanktonscoliosis]

program name pls

[@Decodebd]

Prota Structure