Real or Fake?

This channel will be reaction or publish the tech skill, Whether it's Real or Fake?
-Thank for help me subscribe on my channel...
-🌾💯SubHere: / @realorfakeshowu
Take Note: the fan rotors, I've tried it several ones but no one got a magnetic power
#ElectricFangenerator
#DIY free electricity generator
#free energy 220V
#electricgenerator
#realorfake
#Electro-magnetic induction free electricity generator
#how do free energy machine work?
#freee energy generator real or fake
#free energy using magnet
#power generator free electricity
#power saver circuit
#VideoHack show
#FreeEnergy Speaker and Rotor
#free energy without battery
#free energy without motor
#power magnet
#free energy magnet
#self running motors
#motors self runing
#self running motors with magnet
#thermodynamic free energy
#gibbs free energy
#concept of free energy
#standard gibbs free energy formula
#free energy definition in science
#what are free energy
#free energy tesla
#real free energy generator
#free energy solar cell
#free energy-radio frequency
#law of free energy
#how do free energy machine work?
#molar gibbs free energy
#nikola tesla's free electricity
#how did tesla get energy from the air?
#does tesla generate energy?
#tesla wireless electricity
#can magnet get free energy?
#china magnet motor free energy
#free energy video
#fake free energy video in the wold
#free energy videos-real or fake 100% proof
#are free energy generator fake or real?
#fake free energy videos on youtube
#flywheel generator real or fake
#flywheel free energy generator
#free energy experiment
#how to make free electricity
#diagram of free energy generator
#fan motor into 220V generator
#fan motor 220V into dynamo
#free energy tricks
#top free energy video
#free energy battery
#free electricity system
#real or fake video

[@realorfakeshowu]

Real or Fake? I get free gas from a fridge compressor |Coca Rice Lemons and Salt Get Gas kzbin.info/www/bejne/oXqzg3inopaEq8U

[@alpinab111]

Hello Friend! it's not a lie, I tried it and it works. the point is that you have to make sure that the pole of the battery shines well and that you strike the wire quickly. the wire must be heated and that's how you get a magnetic saw.

[@davidpotter9462]

The part you are trying to magnetize is made from chelated iron, which will not hold magnetism. It will attract to a magnet, but the magnetism will not stay in it. The one shown has a magnet imbedded in it somewhere...it did not get magnetized except in one little spot. The steel shaft can be magnetized, but not the other part. If a screw was in it, it would become a magnet...I thought maybe that was what he was going to do...obviously made by a person who was ignorant of how to make an electromagnet...obviously a part that big would need sixty turns of wire, smaller gauge, to be magnetized...the video could have been funnier, only if he would have used four turns of #4 gauge copper wire to magnetize the rotor part.

[@paksokhom2675]

Clear explanation ! Thank you so much.

[@advardshams5995]

Hello . Your work was great. That was the reality you showed. Always be happy and healthy. Thanks Shams

[@taqdeereumamOfficial]

Thank you very much for alerting us to the fake video. You were asked to teach wind turbines. With which we can make our own electricity. Thanks

[@pakiengr.896]

Hahaha... i agree to your idea...thanks

[@technicalKanhucharanBhoi]

Thank for your.

[@abdulsakim6628]

Hallo sir washing machine motor me neodymium magnets lagake electricy bansakti he,

[@pubudukarunarathna5340]

Rotar made with "mild steel" not iron. That's the reason.

[@rajeshkolla1031]

During rotation in between the copper coils their is more magnetism.but, they don't convert magnet on only 12 v they with copper wire some rotations magnetic charging are possible ! No not imposible but posible with another process

[@mdakbarali7841]

Shukriya bhai sach batanekeliye

[@Youtubegamingfact]

Bhai aap bahut good video bnate ho thanks Bhai

[@niacutzahra2715]

Assalamualaikum, thanks broe

[@engalihammoud5843]

Thank you

[@archanakv5557]

Bro you use only 12v and 6v power but it need morethan 24v. You can make magnetism on armature at another way. With welding machine and 24v battery first put the armature on the welding machine and pass the electricity into the welding machine you can try that?😊😊

[@_________________6501]

انت رائع ...شكرا لك

[@channaaudioofficial2160]

thank you

[@petersonphildor2151]

It's possible, I tried it, it's done

[@bmwchris1462]

It is very impossible to magnetize a fan motor. Not even a 4mm wire will do that. Unless if you drill a hole to put neodymium magnet, that will be the only part that i will believe since neodymium magnet is powerful

[@London_UK654]

Induction motor is not magnetic so you are good and youtubers are fakers or scammers but nice video bud

[@mencobabelajar5312]

From dawuhan indonesia 👍👍👍

[@hedehede169]

You can magnetize the rotor by stator alternative this wire when connect stator to DC current mean a battery for a moment , thank you very much that's very clever of you

[@hedehede169]

But the second rotor is aluminum it isn't magnetic material

[@padlanmuhamad3131]

Saya setuju bos usut tuntas tuh yang buat ispirmen hoax

[@philipngcc]

So far Did you manage to find any method that works ? For the fan convert to generator if we drill holes and put magnet, does it work when we turn the shaft ?

[@erwinqaviso8850]

!. ¡¡¡¡¡#

[@realorfakeshowu]

Put magnets on rotor by using strong magnetism it generate voltage out but low power

[@davidpotter9462]

This is funny that he did not put some magnets in there ; because if he had, it would have had some output...From the diameter of the rotating part, it would have to turn very fast to have much output...not very useful...cute looking, but not 3000 watts...the problem with it rotating very fast is, it has brass bushings on the shaft. This whole design is impractical...the wire is too small for any amperage...it has been been badly engineered. It is a desk toy...if some N 42 magnets were put in it, it would produce a sine wave and some power, a few watts...If it were rewound with a larger wire, and roller bearings installed, it might be usable for a small wind charger. But not like it is...it is just a fake mess.

[@bangadbillaofficialll]

​@@realorfakeshowu can some voltage charge phone I need only for charging my phone plz reply

[@harakumarghadai7828]

no it dosnt work i had tried

[@kpomblekoukoudjo4173]

Salut 🙋🙋🙋🙏🙏🙏💪🏻👍🏻🌃

[@wildershafter5060]

I also tried same thing, even with a cap discharge magnetizer. Nothing. Stator iron cannot be magnetized.

[@noorwafa3710]

😉👍

[@riyanchanel6616]

membuat magnet harus mekai acu yang punya positif - negatif.

[@samyvictor1355]

We can make groves at rotator and put magnet N, S

[@Prince_T199]

It was fake because i try did same thing did not work

[@wesleygilbert8117]

I've tried all these and can't even light a bulb or wire the DC motor to a armature and keep it running without a battery connected..... why

[@prithirajmissong4374]

Wrap 5 round

[@rndport.portela2132]

O que acontece é que nem todo rotor pode ser magnetizado. Mas se você ver outros sim é possível

[@realorfakeshowu]

Thank! I've tried several fan rotors but no ones are possible.

[@zadabjlil2281]

Tru good good good

[@James-qw7hp]

kzbin.info/www/bejne/Z52bfGShZdGbjZo

[@pevermelho1969]

Pode ser q este material seja alumínio , de repente se for um material q fique enferrujado como no vídeo principal,pode s que de certo

[@mohammadzare9927]

if whole part of rotor replace with neodymium magnet, still coudnt generate 3000 Watt!

[@victormanuel5919]

Amigo no es así, si deseas magnetizar tienes que hacerlo directamente al núcleo positivo y negativo que salen de la batería al

[@James-qw7hp]

kzbin.info/www/bejne/Z52bfGShZdGbjZo

[@sextronnics]

The method in the video wont work but....There is a working method: to get some temporary magnetism just use your permanent magnet to stroke the rotor in one direction after a number of strokes your rotor will have some temporary magnetism that is strong enough to hold the screws this is what they do to make magnetic screwdrivers the magnetism will disapear so you need tro do it regilary.. another methode is drilling some holes in a rotor and put neodymium magnets in the holes use some glue to keep the neodymium magnets in place.

[@realorfakeshowu]

Thank,🌾

[@harakumarghadai7828]

i did it, i drilled holes and put neo magnets but no current is generated in the coil...except 1-2 volts

[@user-wi5wt5yi6n]

👍❤️❤️❤️

[@samyvictor1355]

I think, it was fake and thank you

[@nepnaeemselectronicspakist1824]

In first video the screw was magnetised my friend

[@jafarghallasi8347]

hi bro you rotor is aluminium .so not magnetec. so shold rotor iron

[@hasithasangewa976]

🤙🤙🤙🤙🤙🤙🤙🤙🤙

[@MS-qd6vs]

Why not try it with battery

[@chandravathits1768]

Bii it is 100/100 rial

[@farhan..engineer4435]

❤200%fake .i also try it.but nothing

[@electriccity919]

I think it need 12v battery

[@joevanolleres5357]

😂😂😂😂😂😂😂😂

[@hk8450]

hahahaha

[@newsoftheworld7927]

Dont Work the Magnetism

[@mustaphayahaya-yw6ug]

It's really fake cuz I also tried and test in different form but isn't.

[@mustyyahaya8495]

i tried several times but is not working. this is not reliable is fake

[@moking8095]

An obvious fake. SCAM, SCAM, SCAM.

[@moking8095]

NO contest Total Fake. SCAM, SCAM, SCAM.

[@fifibibi6837]

Et pourtant youtube nous en mes tout les l'ours et nous e on arrive a rien et se se dégoute de tout c'est merde que youtube enrichi

[@chooper3048]

ayaw naman ung maging magnet ikiniss kiss ko pa sa magnet ayaw paden

[@benjoevatoro]

fake

[@m-emadal-sayed1374]

Fake

[@alma5280]

MORAS ISTOSMJERNOM STRUJOM PROBAT PA DA VIDIS DA NIJE FAKE

[@ashokleyland8373]

fake

[@zinpie7300]

Fake