REAL Ultimate Hauler w/110 Rod Shop Tilt & Slide Roll Back Kit Full Install Instructions

[@ClassicSteelRC]

That's so fricken baaaadddaaaasss!!! @110RodShop is killing it with their creations! 👏👏👏👏

[@jameswest4034]

This thing will be great on my truck. i can't WAIT FOR IT TO BE BACK IN STOCK. i CAN'T WAIT TO BUY ONE. GREAT JOB GUYS ON DESIGNING THIS AND BUILDING IT..

[@RCRoads]

What an amazing upgrade. Thanks for showing us the install. You made it look simple.

[@crawlersncustoms]

Thanks. It’s not difficult work 🤛🏼

[@EliasC425]

I love it, saw the kit a couple weeks ago but havent seen a video of it in action yet. Ultimate hauler with this kit is now in my future

[@crawlersncustoms]

Its a lot of fun.

[@spider7195]

@@crawlersncustomswhat do you need to control the bed

[@rcstinga7364]

I am still waiting for my kit to come in, I was going to do this vid as well… But now I can simply do a recovery video once installed. Thanks for saving me hours of video editing 🤣 👍🤙

[@crawlersncustoms]

Lol bout a half day of editing and 2 separate nights of footage. I would have preferred to film my second one after assembling the kit without the cameras rolling! Hard to justify two identical haulers though!

[@TheVandal118]

Love the snap on box

[@crawlersncustoms]

Thanks. I got lucky to find one.

[@shanecochrane2384]

Awesome just orded my hauler cannot wait till 110 rod shop have them out of stock at the moment .Great vid well explained 👍and electric screwdriver that is cool too

[@crawlersncustoms]

Thanks for the feedback 🤛🏼. That electric screwdriver must have 100,000 miles on it by now 🤘🏼

[@rccrawlingadventuresandmor979]

Good video. Desperately needed to be done when it was first released.

[@robertsabyren6681]

Been waiting for a year for this kit 110 Rod Shop needs to do mass production on it

[@jaredsayrc4947]

Thanks for the video I'm planning one buying two one for my snap-on hauler and one for trx6 Ultimate hauler but right now I'm redoing a regular trx6 into a long wheelbase trx4 medium duty wrecker with the carrier bearing for the ultimate hauler

[@jaredsayrc4947]

You should have unbolt from chassis first then took it apart from their it's would been faster and easier to follow

[@mikealexis]

Very good detailed explanation thanks bro...looking forward to receive mine

[@michaeljones2960]

That's awesome Mr bailey

[@zamoragera13]

Damn !!! This is just what it needed.

[@andyb9994]

That looks like a awesome kit, some may say a little pricey but I think it's worth it looks well built, and I like that it's for a stock truck....very cool, I will get one!!! Great vid 👍👍

[@pb-bx1ll]

Great video, thank you

[@crawlersncustoms]

Glad you liked it!

[@timvanasen9822]

Great video very detailed, does this rollback kit work with the bed widening slats?

[@crawlersncustoms]

Thx! He has wideners now as well so yes.

[@rcclassiccrawlers4368]

Stumbled upon your channel and thought I would check it out. Glad I did. Very cool upgrade option, not that I have one of those but still very cool. Nice job on t(e video. 👍

[@crawlersncustoms]

Thank you 🤛🏼

[@onemansvideos2134]

Traxxas definitely missed an opportunity here

[@glennjthompson332]

😃Company needs money to make this! 😉

[@CasperRc81]

They will probably release set up later

[@lawnmowerdude]

Aftermarket

[@almightysanchez4565]

Probably too expensive to market

[@greerengineering]

Thanks for the link to the motorized driver. It looks like you have a nice set of hex driver bits with plenty of reach. Do you have a link for those? Thanks for the great video. Looks like a nice upgrade for the hauler.

[@SevenWelt]

Hey, Very cool work from you!👍

[@Tom-bo2wj]

Wish it was still available it’s been sold out for a while now. Not even sure if they are still making it.

[@dewaynebrown5983]

Loved the video, can't wait for the next one!

[@crawlersncustoms]

Thanks for the feedback. Trying to get better with each release.

[@boldrbangr9834]

Great job! Very helpful 😜

[@crawlersncustoms]

Thank you 🤛🏼

[@igottimetodaybrah209]

Definitely should of made the body more versatile. I would like to be able to take the flat bed off and drop a toy hauler camper on it. Then put the tilt bed back on and only make one power connection.

[@double2706]

Did you ever post a video with wiring the lights after installation of the kit?

[@crawlersncustoms]

Sorry, no. We haven’t worked on that build since working on LMT parts and the semi. It’s on my list to get back to this year.

[@double2706]

@@crawlersncustoms thank you for the reply. I'm working on mine now and that explains why I couldn't find the video 🤣. Thank you for posting this. It's been a huge huge help!

[@redwolfrc1.14]

Totally super cool bro

[@3dman875]

That is so cool i really enjoy your video

[@crawlersncustoms]

Thanks!

[@djodjodubois9458]

Very cool projet..very thx for Ultimed projet

[@mikehagquist5198]

I love the mip bits perfect tight fit every time

[@crawlersncustoms]

MIP rocks 🤛🏼

[@jeffparryncc1701]

Outstanding!!!

[@justiceonly9105]

Hi, Very grateful for you. Can it run on "Spektrum" esc & motor for 4X4 not for "Crawlers" for speed on sand? Thank you

[@crawlersncustoms]

Definitely. This is basically just a TRX4 or TRX6 drivetrain. They are nearly bombproof and take higher KV systems easily. I have some that go almost 30mph and Ive seen them go much faster as well.

[@justiceonly9105]

@@crawlersncustoms Thank you

[@texasfirefighting]

I love RC but I also love watches. What brand watch is it that you’re wearing?

[@crawlersncustoms]

It’s a titanium citizen my wife gave me.

[@brada5185]

I have a question for you on my dump on the 6 x 6 hauler my a button’s not working I can see the light blinking on the inside of the controller, but it’s not moving all the other three functions worked up and down and the backwards you can hear it clicking inside the controller for B, C, & D buttons but not for A button the red light inside blink but not click

[@crawlersncustoms]

It’s been a long time since I worked on that system. Those controllers are pretty inexpensive so before spending too much time I’d suggest just buying a new one on eBay/amz and swap it out. I would say check all wiring for continuity before replacing parts. You can also swap channels to narrow down the point of failure. Good luck.

[@brada5185]

Thanks for your reply. I came home charged the battery up and it’s working fine.

[@roadrash76]

Will this mechanism work with a 1:10 scale vehicle on the flat bed? Or is that too much weight for the actuators?

[@crawlersncustoms]

Yes it does. We will have some follow up videos in the next 1-2 weeks with the body modifications and the scale winch install.

[@roadrash76]

@@crawlersncustoms excellent

[@exlaskduck]

Id love to see a TF2 on this, mostly because i have the marlin version. Cant wait to see more

[@crawlersncustoms]

The RC4WD trucks fit well since they're narrow and the scale is on the small side for 1/10th.

[@exlaskduck]

@@crawlersncustoms thanks for the reply

[@JSAsher]

Is this a fdm, sls, or injection mold on the plastics? Paused and zoomed couldn’t see layer lines?

[@crawlersncustoms]

Good eye. No visible layer lines. It’s a nylon sls print.

[@joshengland5251]

That look so cool...cant wait to get my hauler...i was just talking about wishing someone would make one...and why didnt traxxas make it a roll off🤔🤔dumb...cant wait to see the next video

[@crawlersncustoms]

Thanks! Im sure this truck will get more content created around it.

[@markhorsfall9346]

Are these discontinued now or do they occasionally bring a batch out ?? Really was wanting a hauler next but a bit heart broken finding out the bed is fixed !! 😢

[@crawlersncustoms]

I believe he’s working on an update. Best to reach out to 110 RodShop directly.

[@thomasmontesrin9750]

What is the power screw driver you are using have a link to it

[@crawlersncustoms]

Link in description.

[@rcsendandblast1579]

Very cool good job 🤘😎

[@Arioch26]

Love this can't wait for more mods on this platform!!! Im goin for an overland build... is there a way to add a rear steer on the yet?

[@crawlersncustoms]

Yes, that's how I made my 8x8. You'll need to buy the steering components, add them to the #3 axle and trim two right side steering axle shafts to fit the centered pumpkin of the #3 axle housing. Its not hard, but I wouldn't say its easy either. We have a video on that truck and at the end you can see a closer look at the set up. The front most steering axle on that 8x8 would be exactly how you'd need to modify this hauler for rear steer.

[@rccrawlingadventuresandmor979]

Rear steer has been around for over 10 years

[@rcintro1489]

Damn that's cool!

[@Lokithefeline]

when will you get the kits back in stock? plus what springs and wieght shock oil should i use with my hauler hauling a 10 pound load + ?

[@crawlersncustoms]

We don’t make these. See 110 rod shop 🤛🏼

[@kevinpierce2727]

Awesome product and amazing video!! **May I ask what the blue electric screw driver brand is I see in this video?!? Been looking for a good one for my RC tool kit. Thanks🤙🏼

[@crawlersncustoms]

Yes. The link is in the description 🤛🏼

[@kevinpierce2727]

@@crawlersncustoms oh ok, thank you! I should have checked that before posting 🤦🏻‍♂️ nonetheless I greatly appreciate your response 🤙🏼

[@rctrucksamerica6868]

Do all the lights hook back up?

[@crawlersncustoms]

You'll need to run an extension.

[@kenmanfredi6916]

Ordered mine in July 2022 still have not received. Not trying to be impatient but seven months?

[@crawlersncustoms]

I was glad to get mine early. But I understand the new ones will be getting an update.

[@StingraysVideos]

That's crazy. Did you ever get it?

[@Scottrc]

yours looks good

[@jpkmates]

When will you have more?

[@crawlersncustoms]

See our friends at 110 Rod Shop

[@matthewgonzalez2360]

Looks cool but the mechanism seems a bit on the noisy side. Any way to improve on that?

[@DB-qm4jx]

No

[@crawlersncustoms]

Yes. Two things: 1) I film basically in a small box, so its not as loud as it seems. This is an early version. There is talk of an update in the future which will replace the scale looking and louder winch with a standard servo winch. This will quiet the travel a lot.

[@ikemort6427]

This is badass!

[@crawlersncustoms]

Yea it’s pretty dang fun! I leave it tilted back when parked 🤘🏼

[@ikemort6427]

@@crawlersncustoms awesome! It seems weird to me that they didn’t come with this.

[@JESchnake]

Cool video. I have been wanting to build one with a slide but didn't know how was going to make it work. That kit takes all the guess work out of it. Where did you get the blue driver from I would like to have one.

[@crawlersncustoms]

Thx. Links in the description

[@JESchnake]

Thanks.

[@Flannery164]

Are they going to make more kits? been outta stock for months.

[@crawlersncustoms]

Hard to say at this point. Best to reach out to them directly.

[@jessiebass54]

Were did you get your screwdriver nat operated

[@cre8rcferfig57]

Love that screwdriver, where can I get it?

[@crawlersncustoms]

Thx. Links in description

[@STARRAUTOCOM]

Hi when will this be available please?

[@year1camaro]

why no footage of a rig on it and in operation?

[@crawlersncustoms]

That will be part of the next video(s) along with scale bits and lighting.

[@thomasmontesrin9750]

What about making a attachment to haul another car behind it like the real trucks do

[@crawlersncustoms]

That’s been talked about. One exists but it’s not scale and sort of folds flat against the back of the deck. It needs to retract and lift to be scale. Not an easy task with how little room is left under the deck with the roll back kit.

[@solosoyyo5845]

Hola!!! Se puede conprar desde españa ??

[@crawlersncustoms]

I think so. Visit 110 RodShop, they sell this conversion.

[@sgtsoap77]

Maybe someone could help me. I was looking at getting a traxxas 6x6 chassis because I want to build a Oshkosh MTVR Wrecker or a M936 A2A Wrecker. This is my first real RC car so I'm kind new. What I kind want to know is would the Traxxas Hauler chassis or the 6x6 Mercedes Benz chassis be better for what I'm trying to do? The only reason I picked traxxas is because my uncle is buying the C10 from traxxas and I would like to keep with the same brand that way we can always order parts together. (edit I dont need a functional crane/tow I just want to start with the body)

[@crawlersncustoms]

Really just depends on the wheelbase you’re after. The trx6 is shorter than the ultimate hauler but are basically the same truck.

[@scalercclub]

Where is the buy?

[@crawlersncustoms]

Links in description 🤛🏼

[@LandenDenham]

What actuators are those?

[@crawlersncustoms]

12v linear 2 wire.

[@rcmike09]

Is this kit no longer available?

[@crawlersncustoms]

I’m not sure. You’ll need to check with 110 Rod shop.

[@NerdHobbiesDiecast]

i actually like electric screw driver like that. where can i find one?

[@crawlersncustoms]

Links in description

[@NerdHobbiesDiecast]

@@crawlersncustoms thanks

[@Joenoblocks]

How does it work with a winch

[@crawlersncustoms]

The traxxas scale winch bolts up to the front of the bed like normal. You would need to wire an extension in. I’ll be showing that in a future video

[@barricaderc7007]

Ok I’m sold how much and when can I get it

[@jaredsayrc4947]

Like 365 though 1:10 Rod Shop

[@Rick776]

What kind of a elektric screwdriver is that?

[@crawlersncustoms]

Link in bio.

[@geraldf4193]

want to install mine for me lol

[@crawlersncustoms]

lol I wish I had the time. I barely get my stuff done as it is.

[@anthonyingramingram6388]

PERFECT

[@edwelchDisgustedDad]

Got any extra rollback kits?

[@crawlersncustoms]

We don’t make those. See 110 Rod Shop. We are however moving and the truck in this video is for sale. Shoot us an email if interested.

[@edwelchDisgustedDad]

@@crawlersncustoms Great. I'll do that now.

[@greendiode5522]

Can it be slowed down?

[@crawlersncustoms]

Yes. In the video i mentioned these were actuators that are not used in the current version. They are about twice as fast as what is being shipped now.

[@JoeOvercoat]

Well done. It’s not an ultimate hauler and less the bed is actuated and it’s got winches fore and aft.

[@johnnysautotowingandrecovery]

James what screw driver are you using ?? Any links on where to get it ??

[@crawlersncustoms]

Links in bio.

[@johnnysautotowingandrecovery]

@@crawlersncustoms thank you found it

[@scottwicklund2198]

Where did you buy that kit

[@crawlersncustoms]

Link in description

[@jaredsayrc4947]

You should redo this video and do a install of Both this kit Plus GT Power Pro A60 it's a esc Motor sound Vibration and light kit that Bluetooth

[@crawlersncustoms]

This was to be a basic overview and detailed install. Trying to keep it as short as possible for those that bought this kit. Lights sounds motor etc will be in other videos 🤛🏼

[@nparagas1]

Please list the tools you used and where to buy them? #Website #toolsusedinthisvideo

[@crawlersncustoms]

I use MIP metric speed drivers.

[@BJ-zy3lo]

they are sold out 😞

[@luisalmazan3236]

Where can I buy one?

[@crawlersncustoms]

Links in description

[@IllusionSector]

_Ultimate, Ultimate Hauler_ - Errr, I'd probably reserve that definition for a Lesu or ScaleArt product.

[@crawlersncustoms]

Those are very nice, but I’m allergic to 1:14 scale.

[@IllusionSector]

@@crawlersncustoms Haha! Strong stance. Is your other truck a Capo Tatra or something?

[@Andriod846]

I want to put a dump body on a TRX6 hauler and make it a dump truck.

[@Andriod846]

Is there a kit to make a TRX6 Ultimate hauler into a dump truck? I haven't found one.

[@crawlersncustoms]

Not to my knowledge. It would likely need to be a hydraulic system like the 1/14 construction equipment to have enough power for a loaded dump bed.

[@thatsmyrc]

@@crawlersncustoms I could make it possible and there are many different actuators and torque ratings that are offered to make it a electric version rather than hydraulic. I’ve been eyeing up the hauler since snap on. Yet all my rigs now fall into 1/14 scale heavy equipment so I haven’t spent the money to modify this hauler up. I’ve done many Bruder conversions and hydraulic conversions this truck is up my alley to tinker on. Great video very clear and informative 👍🏼

[@thatsmyrc]

Ps i was wondering is the suspension the same as a regular tr6? If so how’s added weight on the rear ended hauler when applied? If made into a dump truck it would definitely need the rear suspension beefed up. And that would also be a long bed to cover chassis length

[@sammygonzalez7627]

Thats like over 100 screws give or take

[@crawlersncustoms]

I try not to count but that small electric screwdriver helps!

[@bestamerica]

' that nice cooool R/C towwing truck... i have 3 R/C traxxasas in my channel

[@travisbennett5813]

I made one from a umg10.

[@charliemclaughlin1042]

I don't think this truck would even pick up my Emaxes or haul them 😅

[@crawlersncustoms]

Lol it definitely wouldn’t the emax is 50% wider than the bed

[@jeffjackson5331]

Neat

[@billycarter5318]

I want something like this for my rc drift ford recovery truck We're can I get 1 can't find any We're

[@crawlersncustoms]

Stay tuned for 110 rod shop. He’s working on them now.

[@Mark_B544]

Obviously didn’t do that well I see by missing web pages and discontinued products

[@global-rcs]

Frank und Anton am Freitag mit dem Traxxas TRX6 Ultimate Hauler, Outcast 8s und Losi LMT Vitavon ALU kzbin.info/www/bejne/emaueX1satGqirs

[@jaredsayrc4947]

And I'm shocked that these kits aren't on Ebay for more money because it sells out fast

[@thatsmyrc]

eBay’s is killing small sellers with their fees for selling then fees for listing then also paying federal taxes on the money you made on item turned in at end of yr.

[@crawlersncustoms]

Everyone will be hit with income tax from selling on all these 3p platforms in this tax cycle. Its going to catch a lot of sellers off guard. Basically if you make more than 600 per month on any marketplace they are required to submit documents to the IRS. I don't sell on Ebay as our own website does well enough on its own.

[@quin241]

Awsome🇨🇦

[@khwamtay6459]

already sold out 😭😭😭

[@DargoDog]

That is cool!!! If only the bed roll-back didn't sound like a animal trapped by its testicles...

[@crawlersncustoms]

It’s much quieter than it appears. I film in a small box.

[@tommaxx24]

👍🙂👌

[@take-care]

This just proves traxxas got lazy!

[@louisloudogtrottier3310]

Could you please add 'chapter or let us know what time we need to skip to skip the boring music part ? This is annoying, trying ti find 3sec talk in 3 minutes boring music.

[@louisloudogtrottier3310]

Thank for all the info but i downvoted the video because it is boring AF.

[@louisloudogtrottier3310]

For real, the music makes me feel you are putting us on hold like 10 times in a row. It is annoyong and unpleasnt

[@louisloudogtrottier3310]

This could've been a 10 minute video

[@TuxStang]

Cool kit but hope they'll work a bit on the sound it makes or it'll be a lot of trouble with all animal welfare associations around

[@crawlersncustoms]

It comes across louder than it should because my scale garage is a small box. Tends to amplify all the sounds.

[@RomekRolnik]

In my opinion it’s looking really bad

[@crawlersncustoms]

I prefer the Redcat 53 COE myself. More scale. And we have two wheel styles coming out for it late December.

[@Rick776]

Yeez that sound is awfull

[@crawlersncustoms]

It does sound overly loud in the video since I the scale garage is essentially a small box. Its much more tolerable outside.