How To: install choke tubes in a shotgun barrel. Demonstration video of how to correctly use reamers and taps to install choke tubes in shotgun. Lots of detailed information, should answer all your questions on the subject.
Пікірлер: 65
@edwardporter59054 жыл бұрын
A lathe is great if you have one. I did 3 of mine with a hand drill, its slow but I took my time lots of cutting oil and it worked perfect. Ive done 5 others for buddys and no problems.
@wbriggs1112 жыл бұрын
This tooling is great. Make sure the inside barrel is sanded clean where the work is going to be done. I like to center head the reamer and tap in a drill press and hold the barrel with a wood clamp that has been drilled to receive the barrel. Hold pressure down on the tool with a center punch that is chucked in the drill press. Turn the tap wrench and use Easy Tap brand fluid and clean burrs out every 1/8". I like to blue the new work area so the oil has a nice sticking surface.
@devilghost3 жыл бұрын
Love the tune at the end bro!
@6605eric7 жыл бұрын
Always wanted to see how it was done. Thanks
@TNRonin3 жыл бұрын
URL saved for a project!!! Thanks
@sylviacandler55418 ай бұрын
How are you holding the breach end of the barrel? Tail stock Center?
@rustylozanolpc42279 ай бұрын
How do I get in contact with you about sending my shot gun to get outfitted with a choke system ?
@asadalaraqe7 ай бұрын
السلام عليكم انا من العراق وحببت طريقة عملك الرائعه ...فقط سوال من فضلك انا املك بندقيه لاحظت ان نهاية السبطانه اوانبوب البندقيه قطره كبير تقريبا 18.3ملم سلاحي غير فعال بالصيد هل يمكنني ان افعل نفس شيء لها لكي اربط لها Choke اي خانق مناسب لتحسين عملها ❤
@jameseray197925 күн бұрын
Do you do work for individuals?
@deathpig.98473 жыл бұрын
thanks for the upload, good video
@michaellankford835815 күн бұрын
You stayed you rented the reamer, the bushings and the tap....could you send me the contact info so i can rent them also
@saxonarms9 ай бұрын
Great Video
@chasefisher58633 жыл бұрын
great tutorial!
@garymagliocca291311 ай бұрын
Are you using a bottom tap?
@andrechiodi27686 ай бұрын
Você recupera o cano das armas se começar a estufar cartucho ? Como e feito por aí
@ngzcaz5 жыл бұрын
So the barrel is fed by hand into the lathe ?? Not what I would have expected..
@sebastiantufigno85298 жыл бұрын
When you Tap the barrel after reaming; is the tread from the top to the end of the reamer; meaning.if I have choke tube with the tread at the top instead of the end and it had the same pitch size tread; will it srew up well in the barrel ?
@ReamerGuy8 жыл бұрын
It depends on the configuration. The majority of chokes are not threaded at the muzzle, the reamer has already cleared that area of the barrel before tapping.
@rondonovan429310 ай бұрын
Why cant i find any info on thread count or pitch , type of thread 0n chokes ?? Does anyone make cutting or chasing dies for choke tubes ??
@shotgunreloader49647 жыл бұрын
Where is the runout coming from, the 3 jaw chuck or is the reamer bent? it will make the reamed hole larger than desired did you check afterwards to see how much?
@ReamerGuy5 жыл бұрын
Cheap shotgun barrel frequently if not always have the bore off center in the barrel. Note that the reamer is not showing run-out, it is only the barrel that is moving axially.
@ikesquirrel2 жыл бұрын
Looks like the spindle is bent or the 3 jaw has a lot of runout. It could be a reamer, but not likely.
@FredZ-lu1om Жыл бұрын
Nothing wrong with the lathe or the tool. its the barrel.
@MichaelNashef7 жыл бұрын
where can you buy this set from?
@coburnlowman5 жыл бұрын
Do you have contact? Do you sell or rent these choke reamer / tap sets? I have a closet full of shotguns that I'd use often if I had interchangeable chokes for em.
@RussellCompton-fh3gr26 күн бұрын
is this tool still avalable ??
@MultiMrNoone10 жыл бұрын
How often should you break the chip when cutting threads? I have seen when cutting smaller threads it is recommended to back off the tap every half to one turn. Seems like it worked out for you, just curious if the difference in diameters is the cause or what. Awesome video though, just what I was looking for!
@FredZ-lu1om Жыл бұрын
I break the chip about every thread or two. you are working on a very larger surface area.
@hafezmansour15637 ай бұрын
What is the diameter of the thread tap?
@ReamerGuy5 жыл бұрын
It's important to note that you must either cut the barrel back to eliminate to the fixed chokes, or you must ream them out with a separate reamer. The only exception to this is a cylinder bore barrel (no choke). 4drentals.com/measuring-for-screw-in-chokes-shotgun/
@rezguy20942 жыл бұрын
Hi um if I got this can I rechoke cuz I accidentally got the wrong choke and it suppose to fit optima plus but my barrel is benelli mobil
@FredZ-lu1om Жыл бұрын
Always work on the cheapest part. Its cheaper the order more choke tubes than to work on the barrel.
@mblake04207 жыл бұрын
minimum thickness? want to do this to my mossberg 20 inch 8 shot 500 standard thickness
@beerandbaitcasters3 жыл бұрын
I know the thread is old but I have the same barrel and was wondering if you ever got around to this and how it turned out
@Keepingitreal9810 жыл бұрын
How much would you say a gunsmith charges to do this?
@ReamerGuy8 жыл бұрын
Several sites list prices about $135 per barrel is average.
@LuisMorales-mt7kw6 жыл бұрын
Keepingitreal
@mikerotch67333 жыл бұрын
Ik a guy who will do it for 80
@matthewlacy80037 жыл бұрын
What is your rpm on your lathe while reaming?
@ReamerGuy5 жыл бұрын
Keep it slow, mine is about 75 RPM. This is a large diameter tool with a huge cutting surface.
@joewhiteman94627 жыл бұрын
in general how much to have this done to my shotgun?
@ReamerGuy5 жыл бұрын
Every shop has their own pricing. Rentals are about $55
@tjcornish25899 жыл бұрын
One's you put it on your barrow can you take it out later?
@pacman101825 жыл бұрын
I had to translate that "once you put it on your barrel can you take it out later" I assume you mean the choke tube. yes you can, takes a special wrench, but a pack of tubes should come with one
@speedracersimpson10 жыл бұрын
What if I thread my 12 gauge fixed improved cyledner barrel for a choke without doing the reaming? ?
@FredZ-lu1om Жыл бұрын
Cannot be done.
@aaronmenchinger2 жыл бұрын
What size tap and reamer is that?
@FredZ-lu1om Жыл бұрын
There are several types available. You order the tools for the type of choke tube you are using.
@kyle63077 жыл бұрын
Tried to contact Tru - Choke on several occasion to no avail, any suggestions or are they gone ?
@ReamerGuy5 жыл бұрын
We offer these tools for rent if that helps. If you're looking for choke tubes, Brownells, MidwayUSA, Carlsons and several others sell them. 4drentals.com/products/tool-rentals/shotgun-tool-rentals/
@bakanibaleni58658 жыл бұрын
do we real need so many chokes in a gun? a full fixed choke in a hunting gun is enough to do all what other chokes can do as along as your shooting distance is well calculated. also not forgetting the use of the right kind of ammo for your hunt.
@bakanibaleni58658 жыл бұрын
Lelouch Vi Britannia a full choked barrel can shoot every shot, no need to worry about a thing. no need for sabot slugs because rifled slugs are there for smooth bores.
@ReamerGuy8 жыл бұрын
There are many reasons why a shooter might choose to have interchangeable chokes. Almost as many reasons as there are shooters. LOL Baskin Robbins has 31 flavors, not because Vanilla is not a good choice, but because some folks want something else. Happy Shooting.
@bakanibaleni58658 жыл бұрын
is it because shooters need that or because it is there and why not opt for ? LOL
@robaldridge65057 жыл бұрын
try a full choke on squirrels at 10 yards, you won't have enough meat left for supper...
@jasnonya30055 жыл бұрын
If you shoot steel shot, which is required for waterfowl, you want a replacable choke
@CE-nh7kb Жыл бұрын
This whole video is a crime against metalworking.
@FredZ-lu1om Жыл бұрын
The tooling is piloted to fit the bore. Many people use a drill press or a hand drill motor for this process. Its for a shotgun not a long range rifle. Nobody claimed this was a precision process.
@todoslosantilopesonm7 жыл бұрын
Hello how are you ! I want to buy these items where I can do it? thanks and regards
@ReamerGuy5 жыл бұрын
We offer them for rent if that helps? 4drentals.com/products/tool-rentals/shotgun-tool-rentals/
@paulmorin22343 жыл бұрын
The sound is very low.
@jimdavidson5208 Жыл бұрын
Where's the precision? I see nothing but wobble city during every process.
@SzymczykProductions8 ай бұрын
Mr. perfect over here...☝️ 🙄
@trupyrodice4462 Жыл бұрын
Grate video, and great work. I have only one suggestion because we live In a world of fake woke douche bags, the attention span has drastically shortened. Knowing that I’d go a little heavier on the editing to get the time down of each video. 😂🏏