Thanks!!!!! Always good to see it done before tackling it yourself.
@scottausmus11429 жыл бұрын
Nice walk thru Marc....will make it easier for anyone needing to do an axle change ....Thanks...
@magwamagwa451103 жыл бұрын
great videos on working on the sport or trail thanks for sharing...
@20_below5 жыл бұрын
Thank you I found this extremely helpful when working on my 2012 Wildcat 1000 rear end
@marcoradat5 жыл бұрын
Welcome! Glad it was useful!!
@backcountrybuilds3 жыл бұрын
Super helpful! Thanks
@cvpiDOTnet9 жыл бұрын
I use a high a Snap-On high impact wrench to break the bolt loose. It will break a nut loos at up to 200 ft-lb. I use a socket and 1/4 extension to push in the pin to release the shaft, gets a better hold and does not slip off pushing it in. For me faster over using a screw driver. Also, why does the replacement axle not come with a spindle nut? The Super ATV ones I replace with do, so OEM does not?
@shannonbushman9 жыл бұрын
This is me this morning trying to bust the castle nut loose 'F&%*k', looks like I'm not the only inner CV breaker, thanks for the vid.
@joea.60173 жыл бұрын
3:52, my friends Wildcat doesn't appear to push in. Are all axles for the wildcat made the same or does he have something else going on? Ive tried helping him remove his but no luck so far.
@marcoradat3 жыл бұрын
If it's an OEM axle it operates the same. An aftermarket likely will just pull out.
@joea.60173 жыл бұрын
@@marcoradat When you say operates the same. Explain, please? I am unfamiliar with these wildcats. I've always swapped out RZR axles. They seem to come out much easier! He has tried an axle, wedging something between the cup and the diff. I feel like he has beat the time out of this axle. Of course, its broke and the only left in the diff, is the 3" round cup I would call it.
@marcoradat3 жыл бұрын
@@joea.6017 I have a video showing how to remove just the cup from the diff. I'll see if I can find it.
@marcoradat3 жыл бұрын
@@joea.6017 see if this helps... kzbin.info/www/bejne/j3PZnmdor5JphpY
@Jc-pj1ex7 жыл бұрын
pull pin and hub cap. put wheel tire back on. put breaker on it and use vehicle to break it free. 1000cc breaker bar!
@Carcajoo1213 жыл бұрын
Do you know what the size the axle nut is …29 or 30 mm ? Thanks
@marcoradat3 жыл бұрын
Off the top of my head, 30mm sounds more correct that 29mm.
@NeBoFoRiOn9 жыл бұрын
great vid man i just got my wild cat sport didnt know about the center pin release how has yours been treating you so far
@marcoradat9 жыл бұрын
NeBoFoRiOn I break it all the time but I'm pretty rough on it.
@NeBoFoRiOn9 жыл бұрын
marcoradat do you still run the stock tires im gona run mine for a while not shore what ill put on next i put the warren 5000 pound winch in front it was a snug fit but looks good
@marcoradat9 жыл бұрын
NeBoFoRiOn only ran the stock tires for maybe 20 miles. I have three different sets of tires and wheels depending on what type of riding we are headed out to do.
@301991305 жыл бұрын
Hi so quick question and it might be a dumb one but I have a 2015 Wildcat 4 seater and my back passenger tire is tilted if you're looking at them they kind of look like this | / only not that exaggerated. Anyway would you have any input into what may be causing this or what I should look at replacing? Any help is greatly aprreciated
@Carcajoo1213 жыл бұрын
Your bearings are worn out
@spooln309 жыл бұрын
Thinking about getting a Sport Limited. How are you liking your Sport and have you ran across any major issues besides the axle? I know the Trails had some problems like the engine mounts that can potentially lead to a fire, the oil lines etc. Would like to hear from owners so I know exactly what to watch out for. Oh yeah I ran across a couple guys that had they suspension bolts loosen up and widen the mounting tab holes. I kinda blame the owners on this one because your supposed to check all of the nuts and bolts regularly. Thanks
@marcoradat9 жыл бұрын
+30spooln I have not had any problems that were not self induced other than a melted firewall and my front shock springs rubbing the shock body. The Sport has been a very good machine.
@spooln309 жыл бұрын
We're you engine mounts bad? That's kinda what I've found when the firewall starts melting, the mounts are broken.
@marcoradat9 жыл бұрын
+30spooln I had broken mounts on my Trail and no firewall issues. The Sport has never had motor mount issues. The firewall thing is not necessarily form the motor mounts. Mine melted when I added a passenger on a dune trip and just caused more load on the machine thus causing more heat. I pulled the header and had it ceramic coated and added another layer of heat tape to the firewall and have never had another issue.
@rugby38746 жыл бұрын
Every time i ever orded an axil a new nut came with it.
@rugby38744 жыл бұрын
Don't get axles from atvconnection They will not stay in the diff.