Rear Tire Removal - Balance - Rotor and Brake Pad Install Harley Davidson

This is the 2ND Part of the Lyndall Brakes install. I covered the Rear Tire Removal, Balance, Rotor + Pad Install. I will be making a separate, more in-depth video for Proper Belt Deflection, and the Suspension!
Fromt Tire Video 🤟🏽
• Lyndall Rotors and Bra...
Lyndall Rotors 👉🏽 bit.ly/Lyndall_Rotors
Lyndall Brakes 👉🏽 bit.ly/Lyndall_Brake_Pads
Share this video with a friend - • Lyndall Rotors and Bra...
Also, Let’s Connect :
Shop - www.raiderworldselect.com
Facebook - / raiderworld72
Instagram - / raiderworldinc
Email - [e-mail]
Music by - Epidemic Sound www.epidemicsound.com
As a disclaimer, I am not a Harley Davidson or Motorcycle Mechanic. I’m just someone, like most of you watching these videos, who likes to wrench in their own garage or shop. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you. Any Amazon Links you click below and complete a purchase, I receive a small commission. This helps me to buy more parts or tools needed to install and review on this channel.
"As an Amazon Associate, I earn from qualifying purchases"
TOOLS:
BikeMaster Wheel Balancer and Truing Stand
amzn.to/46blZKs
Wheel Weights Motion Pro
amzn.to/46WhraM
Rear Wheel Alignment Tool Motion Pro
amzn.to/3Q3Qbjt
Belt Tension Gauge
amzn.to/3M8vwKd
36MM Socket
amzn.to/48VFHLL
Dial Indicator Gage Gauge
amzn.to/3ru7Fxu
Professional Digital Outside Micrometer
amzn.to/3t9quqh
Disc Brake Pad Installation Spreader Caliper Piston Spreader Tool
amzn.to/3RAt1nf
Disc Brake Quiet
amzn.to/3FayYzV
MityVac Brake Bleeding Tune-Up Kit
amzn.to/3rBuGyE
Fluid Tester Pen
amzn.to/48NhWW3
Brake Parts Cleaner
amzn.to/48KV0a9
Electronic Digital Caliper
amzn.to/46IuvjZ
Milwaukee Electric Ratchet w/ Variable Speed Trigger
amzn.to/3PTuiDG
TEKTON Deep Socket Set
amzn.to/3oUKach
Rhino Motorcycle Straps
amzn.to/3gRI8Fi
DEWALT Impact Socket Set
amzn.to/41uiFXE
TEKTON 91804 Quick-Release Swivel Head Ratchet Set
amzn.to/2OHff3X
TEKTON ¼ Drive Torque Wrench (20 - 200 in-lb)
amzn.to/3t3y9kF
TEKTON ½ Drive Torque Wrench (10 - 150 ft-lb)
amzn.to/3wFgG4h
GEARWRENCH 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs
amzn.to/3AHwhUt
Wheeler Manual Firearms Accurizing Torque (F.A.T) Wrench
amzn.to/3EzThXa
Thread Restorer Kit
amzn.to/3JQlYCZ
GEARWRENCH Stubby Flex Head Ratcheting Combination Wrench Set
amzn.to/3bFNrWP
Stubby Impact Socket Set
amzn.to/3IqTyOz
Stubby Bit Set
amzn.to/3Mf42Sb
Milwaukee M4 Screwdriver Kit (Also makes life a little easier)
amzn.to/2OHg1xT
Powerbuilt Vinyl Protector Pad Mat (Protect your Parts)
amzn.to/3t6R3qy
Parts Blanket Protects Against Scratches
amzn.to/3GAumEi
OEMTOOLS Tool Cart
amzn.to/3crvevi
LEXIVON Master Hex Bit Socket Set
amzn.to/3t2fCW0
LEXIVON Torx bit Socket Set
amzn.to/31XL7Vc
GOPRO SET UP:
Drone DJI Air 2-S Fly More Combo
amzn.to/3i80LXd
Simpson Helmet Mod Bandit
amzn.to/3VvYmaL
GoPro Chin Mount
chinmounts.com/
GoPro Hero 10 Black
amzn.to/3S404h5
GoPro Hero 8 Black
amzn.to/3vsSXnA
GoPro Hero 7 Black
amzn.to/3IBAydH
Gobe NDX 52mm Variable ND Lens Filter
amzn.to/3KYBY3q
ULANZI G9-5 Housing Case for Gopro Hero 10 9, Aluminum Video Cage (NEWER VERSION)
amzn.to/3JqFK5e
Rode SC3 3.5mm TRRS to TRS Cable Adaptor for smartLav Microphone amzn.to/3wkX9bY
Rode SmartLav+ Omnidirectional Lavalier Microphone
amzn.to/36sxR0r
GoPro Pro 3.5mm Mic Adapter (Official GoPro Accessory)
amzn.to/3ijchOz
Camera Battery Storage Bag, Battery Holder Case for GoPro
amzn.to/3MXCdgZ
Sandisk 128GB Ultra Micro SDXC Memory Card
amzn.to/3tefuTe
GoPro Suction Cup (Official GoPro Accessory)
amzn.to/30zXnun
Neewer Camera Lens Filter Kit for GoPro
amzn.to/38yZIdE
SHOP LIGHTS, STANDS, HANDHELD, and AUDIO:
Barrina LED Shop Lights (Makes any garage look like a showroom)
amzn.to/2PCRSJl
Neewer 2 Piece LED Video Light and Stand (Great for that extra needed light)
amzn.to/2PAuFaJ
Neewer Camera Tripod Monopod with Rotatable Center
amzn.to/2O5CFjB
Neewer Tripod Pro
amzn.to/41BgSjX
KOBRA-TECH Phone Holder
amzn.to/41ydRks
SoHo Urban Artist Tripod Weight Bag
amzn.to/38b42zn
Aputure Amaran AL-MX LED Video Light (Great light for on-the-go)
amzn.to/3riWke1
Tascam DR-10L Digital Recorder Kit (Easy to operate and clear sound)
amzn.to/2Pw81A9
Apple Lightning to 3.5mm Headphone Jack Adapter
amzn.to/3qmDDEZ
#harleydavidson #rotors #brakes

[@ericdesrochers9464]

Great video as always 🤘

[@RAIDERWORLD]

Thank You! I definitely appreciate it 🤟🏽

[@olddudeonaducati3153]

Great video man , ill take all the help i can get. Just picked up a 23 lowrider st and will do maintenance myself. Coming from a ducati monster which has very few video how to's.. excellent video..thank you..😊

[@RAIDERWORLD]

That’s awesome! Thank You. Congratulations on the new scoot 🤘🏽 You will find plenty of how-to’s on these Harleys for sure

[@alred6568]

Very well done video. However, I can give a little word of caution for well used rotors and bolts. Due to the extreme heat those bolts are exposed to during operation, heat,and penetrating fluid can help to remove the weak t45 design of that particular bolt. Lastly, close attention should be focus in keeping the t45 and ratchet in a STRAIGHT 90 degree angle. I have seen many high end t45 bolts and bits damage due to proper use or lack of proper preparation. Great information has been publish on this particular subject.

[@RAIDERWORLD]

Absolutely, thank you for the input 👍🏽

[@ncautolink]

Just balanced my wheel flowing your video! Bought balance stand from Harbor Freight. The balance came out spot on perfect The motorcycle shop balanced the same wheel twice and couldn’t get it correct! , thanks

[@RAIDERWORLD]

That’s great to hear! Definitely an easy project

[@ncautolink]

Your videos are the best! Very well explained and detailed! Thank you! Just ordered the rear axle locking tool and Alignment tool! I never knew it existed before I saw your video. Always struggled with getting the rear axle and wheel straight.

[@RAIDERWORLD]

Thank You! I definitely appreciate the support

[@Jim_Berry]

I like your style and really enjoy your videos. I always use gloves with anti seize, cause it tends to get everywhere and it’s hard to get off.

[@RAIDERWORLD]

Thank You! I appreciate the support. Yes, wearing glove’s absolutely helps. It’s easier to wipe off the glove than it is your hand. For some reason, I just didn’t wear any this time.

[@ncautolink]

Once again! What a great video! Just installed new Metzler CruizeTec tires and rear brakes. Got rage wheel Allignment tool and the rear axle nut tool. Made it so easy! Thank you Sir!

[@RAIDERWORLD]

Thank You for the Support! The right tools always help

[@m.s.8312]

Great video, learned a lot.

[@RAIDERWORLD]

Thank You! I’m glad it was helpful

[@kellybgliding]

Love the rotors!! It just put a different flavor on the bike

[@RAIDERWORLD]

They definitely do make a world of difference. Not only in looks, but serious stopping power

[@danbarrette9888]

What are your thoughts on the liquid tire balancer. You make working on your bike look so easy.

[@RAIDERWORLD]

I’ve never tried the liquid balancer. I don’t know how that would hold up over time, and if different temperatures would have any effect. I’m currently testing out the bead Balance of the front tire. I like to visually see the weights, and if one falls off I can always add another

[@BrewCityRider]

Slick vid, nice job. I see you like to have the proper tools for the job like me😅. That Jim's tool was cool.

[@RAIDERWORLD]

Thank You! Yes, the right tools make the job a lot easier.

[@sergiogarcia3476]

Thank you for the details on all your videos, question? When you do the final torque 140ftlb that’s when bike weight on the floor ?

[@RAIDERWORLD]

Thank You for the support and watching! It doesn’t really matter. As long as your wheel is locked and not in neutral or spinning, it should be fine.

[@sonboogie]

Another great vid. Question, does the pulley and isolator not play role in the balancing?

[@RAIDERWORLD]

Nope they do not, main reason being that they are not fixed to the tire 👍🏽

[@GK-bh1tp]

Love those rotors! Question though, can I change just the front? I feel like thats alot of work for something that's hidden by my saddlebags anyway. But, performance wise.....will changing just the front be a problem?

[@RAIDERWORLD]

There’s nothing wrong with just changing out the front. You will still be adding additional stopping power.

[@sergiogarcia3476]

I appreciate your videos , I did change my rear tire successfully thanks to your videos, by the chance do you know why is belt deflection for a 2017 road glide special? I lost my service manual😞 I notice you have same bike

[@sergiogarcia3476]

I already bought the motion pro gauge just need to know how tight needs to be , thank you for your help!

[@RAIDERWORLD]

I’m glad this video was helpful. It should show it on the Harley Website or the forums. It should be the same for 2015-2021 models, but not 100%. You can always purchase a digital service manual online for around $25

[@sergiogarcia3476]

@@RAIDERWORLD thank you!!! I really appreciate your help!!👍

[@jasonclark1223]

Im curious, given you have a fixed cam on your rear axle, what would you have done if the alignment was off?

[@RAIDERWORLD]

I would have turned that cam adjuster until the belt diflection was correct and re-check both sides of the axle for proper alignment with the swingarm

[@jasonclark1223]

@@RAIDERWORLD so are you saying one of the cam lobs would have been worn or shorter than the other, even with the belt to tight the cam, if same would have made the alignment 'correct' or is there something else we are looking for like the swing arm shaft possibly worn so moving slightly lateral?

[@Avankaurparmar]

What you think are better performing these brakes or the galfer??

[@RAIDERWORLD]

I’ve never ridden with Galfer Rotors before, so I can’t really say which one is better. I would say that the Lyndalls Coiled ring retaining system vs the Galfer button style is far superior. I have heard those rattle over time

[@TomMartini-su4vx]

Good video, but where is the tire removal?

[@RAIDERWORLD]

Thank You! Should be somewhere in this video lol

[@TomMartini-su4vx]

@@RAIDERWORLD​​⁠​⁠it seems that we may use different terminology. What you refer to as rear tire removal, I would call rear wheel removal. As a guy who has already removed my rear wheel from my bike, I was hoping to see your tire come off your wheel! Nevertheless, your procedure is meticulous and your aftermarket parts selection is primo👌.

[@RAIDERWORLD]

Oh ok, I got you now. Unfortunately I do not have any videos (yet) covering tire removal. I will in the future 🤘🏽

[@2147crew]

Your bike is bad A! The brakes are one of a kind.

[@RAIDERWORLD]

Thank You Brother! I’m definitely looking forward to the rest