Rear Wheel Removal (How-To)

[@calvin.frederickson]

Could there be a particular reason the spacers seem to be off 1-2mm? I can get one spacer in place, but the other seems just to be 1-2mm off. Thank you

[@eddmelter1012]

I've seen people jack the bike up like that but is that not bad for the exhaust?

[@CHRGITUP]

I haven't seen any issues doing so, at LEAST with sport bikes... I wouldn't do that with like 1200lbs harleys you know!?

[@Suelo805]

When the shaft goes in those ir matter how it’s squared up on the not nut side ??

[@CHRGITUP]

Do you have an R6 or another model?

[@Suelo805]

@@CHRGITUP r6 2020

[@CHRGITUP]

The shaft can only go in one way on the "none" nut side. There is a locating tab on the left side of the bike and when the shaft is all the way in it should be nice and flush to that tab and the swingarm. Find me on IG @CHRGITUP and I can sent you an image if more info is needed. Hope this helps!

[@jacobsmith6525]

Can someone tell me why my speed sensor graded like cheese on the speed sensor disc? All of my spacers are in the bike and it was sheared off. Also that metal piece above it is rubbing against my rotor. Any ideas?

[@CHRGITUP]

This one sounds super weird unless there is something missing from the install. There could be couple of variables that could cause this and I wouldn't be able to really help through text. Hope you got this fixed.

[@jacobsmith6525]

@@CHRGITUP it was my wheel bearings!!