Рет қаралды 214
#Rebar #Cold #Forging #Machine
Rebar Upsetting Cold Forging Machine
TMT Bar Forging Machine
In this videos let us see the working process of Rebar Cold Forging Machine and Why TMT Bar Stuck in Bar Forging Machine
get answer to the question why TMT bar Stuck in Cold Forging Machine.
To Buy or Rent this Machine Contact Us on Below details
Phone :- +91 9223446390
Email :- surya.engineers2000@gmail.com
Visit :- suryaengineeri...
Why TMT Bar Stuck in Cold Forging Machine?
* Because of the sharp edge of the iron, it grabs onto the TMT Bar and this only happens 3 or 4 times when a new die and punch are place.
After 3 to 4 time use of Forging Die and Punch its sharp edge of iron become Smooth and TMT Bar never stuck on forging machine until or unless you change the Forging Machine Die & Punch.
फोर्जिंग मशीन में टीएमटी बार क्यू फस जाता है ?
*लोहे की तेज धार के कारण, यह टीएमटी बार पर पकड़ बना लेता है और यह केवल 3 या 4 बार होता है जब एक नया डाई और पंच होता है।
फोर्जिंग डाई और पंच के 3 से 4 बार उपयोग के बाद लोहे की तेज धार चिकनी हो जाती है और टीएमटी बार फोर्जिंग मशीन पर तब तक नहीं अटकता जब तक कि आप फोर्जिंग मशीन की डाई और पंच को नहीं बदलते।