Rebar Coupler for Reinforcement of Bar l Forging l Threading l Mechanical Splices

Coupler for Reinforcement of Bar l Forging l Threading l Mechanical Splices
#mechanicalsplices #coupler #threading
In this video, I have explained about the how mechanical splices or Rebar couplers for much beneficial of rebar / reinforcement steel joints is explained in details
Coupler:
A rebar coupler is a technical product that is necessary when long length of bar is required. The primary work of this coupler in reinforcement is to join two TMT bars for continuous reinforcement. The rebar coupler is used in all the construction fields, such as, constructions of buildings, bridges, dams, towers, etc.
Benefits:
1. Construction cycle time reduced
2. Rebar wastage is reduced
3. Easy installation and requires no skilled labours
Please Subscribe: / civilconstruct
===================================================================
Visit our Channel for Civil Engineering Knowledge:
/ dndconstruction
Visit our Channel for lifestyle & Fitness
/ @dineshlifestyle
Follow us on INSTAGRAM: www.instagram....
Join us on Telegram: t.me/civil_con...
Follow us on FACEBOOK: / 102249415176766
===================================================================
Rebar Coupler
Coupler
Mechanical Splices
Coupler for steel reinforcement
Coupler used in construction
===================================================================
Disclaimer - This video is for educational purpose only. Copyright
Disclaimer Under Section 107 of the Copyright Act 1976, allowance is
made for "fair use" for purposes such as criticism, comment, news
reporting, teaching, scholarship, and research. Fair use is a use
permitted by copyright statute that might otherwise be infringing.
Non-profit, educational or personal use tips the balance in favor of
fair use .

[@rameshpasumarthi2161]

sir what is the distance between one rebar to another rebar &what is the minimum alternative distance

[@CivilConstruct]

50 x dia

[@Theconcreteworld]

600mm

[@-SanjaykumarM-gx4sz]

Does coupler joint needs to be done in alternate level in column ?

[@CivilConstruct]

No need For smooth working on site 100mm can keep, for sufficient space for tightening the coupler

[@kadaripradeep4154]

Cupler height

[@CivilConstruct]

110-190mm Varies as per diameter

[@ashisdhoni8822]

Machin hi 1lakhs ka hoga. 😂Chhote builders nahi kar payega...i hope China small machine banayega.. Threading ke liye

[@kavitasikarwar8320]

Kuldeep Singh threading machine operator

[@CivilConstruct]

😀😀😀

[@smit3255]

Kuldeep Singh contact no. Plz

[@smit3255]

Sir coupler ka safe zone kya hota hai,or Lapping or coupler me best konsa hota hai,strength or cost wise?

[@Prem.P0007]

Always batter than lap ...​@@smit3255

[@Prem.P0007]

​@@CivilConstructcould you please share your contact details to connect??

[@muktarali4594]

Hello sir no bhejo

[@CivilConstruct]

9819528879