Rebar Quantity and Bending Schedule in Revit

[@FrankyFranz]

I would recommend using the "Shape Image" (type) parameter inside the Rebar Shape families, instead of using the "Image" parameter inside the schedule. Using "Shape Image" parameter allows you to assign an image directly to a rebar shape (which will be used repetitively in a schedule) instead of assigning the image to the rebar itself. If you have lots of rebar in you schedule, it could be very time consuming to assign an image to each rebar. Thanks for the video.

[@123rockstar2010]

Yes! After hours of searching. I found the video. Here is for those who are interested in the Shape Image technique. kzbin.info/www/bejne/jKaTqpSZmMdkgq8

[@edwinagito2302]

Hi there. I agree to that. From my previous company, I only show the shape image if there are special bars that need to be presented according to their respective Values for bar bending. Shape code 99 for example. cheers.

[@antoine0269]

I dont find this in french tutorials, you save my life, Thanks for you're jobs.

[@jasonschembriify]

Best Revit tutorials on KZbin. Thanks, learning so much!

[@AhmedAli-qw2sk]

More of this please.

[@abduljaleel4391]

Very good channel... very good explanation... please make more videos.. this will be useful All students.. I am from India... kerala... thanks 🙏

[@Liepez]

Thanks! I hope you'll post a MEP videos also! About industry, not only civil buildings ;)

[@auto-fav8969]

THANKS

[@riskaayufebriyani2391]

Thank you

[@JuryShtyrev]

Hey comrade, is there something wrong with the “D” size at the rim of the armature? "C" should be equal to "D"? In any case, thanks a lesson, your videos always help.

[@robertoalcantara8772]

Thanks for this useful video sir. :) But why is it that the dimension in the rebar does not coincide with the raster image that you added.?

[@arwindersmann969]

Please make a tutorial on diaphragm wall

[@mechanicosz9337]

Hi there, nice video, however the shape image dimension letters A, B, C, D do not match with the dimensions you have in the table. For example, the straight bar length is annotated with the letter A in the shape image , and your value for A in the table is 0 but the value of B is 8100mm which is actually showing the length of the bar. any idea how we can change this so that the image agrees with the table?

[@azeddinekarima8738]

Nice.thanks. Please, I need to calculate total rebar in kilogram

[@EnzYPlus]

Good knowledge in this video, but you have the same problem what I have. On 7.06 min you see the link on dimension D is showed 520mm but as I can see on pic. obviously there is not 520mm

[@akramsayyd3823]

Hey man you should do the quickest fastest course on revit structure as well.

[@gogoaecom]

This is excellent, by the way is there any Rebar for wall corners, regards Goran

[@georgealhassan3584]

GOOD TUTORIALS

[@mayurchoudhari6578]

How to manage the scale of text when the model's scale is changed

[@megabuilds3007]

VVVVVVVvvvvvvvvvvvvvvvvvvvvvvvvvvvv Useful, Do more and more on these balkan

[@abhishekmaharishi9246]

Thanx

[@usamakarbari1631]

Hello I wanted to know that can we calculate how much concrete required for it in revit with bars?

[@abhishekmaharishi9246]

Definitely useful... 👌👍

[@johnw1597]

Hi Balkan, great video! I have a question that I was hoping you could answer as it is driving me crazy! I see on your schedule it is listing the 'schedule mark 2', twice, rather than having a total for schedule mark 2. A typical British standard rebar schedule would not list each and every bar mark like this, it would group them together as totals. Do you have any idea how to do this? Your help would be greatly appreciated! Thank you.

[@edwinagito2302]

Yes I agree. It should be combined and Bar Mark 2 will only appear once with a total of 8 bars.

[@onestoptechnocommercial5494]

Can we export the schedule as Excel

[@HR-dz5vu]

Hi BA, Thanks for your video. Is there a way for Revit to round the length of the reinforcement bar to nearest 5mm? E.g. if I have shape code 00 and its length is 7358 mm, but I want it rounded up to 7360 mm in the schedule. Thanks

[@ryanchristiancaldejon3642]

Does it consider splicing in taking quantities? For example in main bar?

[@benjaminkofiedumadzecudjoe5621]

very nice i really got grate stuff from this video, please how can i get your project files

[@tomaszjakubowski3922]

How to asign rebar to particular concrete element in the schedule?

[@vc671]

how can i put in realistic mode and show the bars? bye thank you

[@vgkshorts]

How to use revit in infrastructure work like metro highway bridges projects

[@recepyazici55]

Rebar shape images searched the folder on the internet, but I could not find, do you have any, can you share? Thank you.

[@smk3ful]

thank me later ! revitbeyondbim.wordpress.com/2016/12/15/rebar-shape-images-in-revit/

[@umangupadhyay0669]

@@smk3ful thanks :)

[@yogidwinandaramadhan7630]

@@smk3ful thanks

[@ilavarasapandiannamalai8128]

Bro please uploading all videos in tamil

[@TotoroTsai]

Excuse me, how could I get the rebar image files to insert ? Thx!

[@usmanaliyuhajji9664]

Hey sir, I need your help. My rebar folder is empty please can I get them

[@gracemegumi4336]

How can i down load the images on rebar schedule?

[@fillbertnjoko7875]

Hello, if we have several floors when rebar detailing, should we difference the rebar size for each column, beam, and slab on each floor?(i.e 19mm column A lvl 1, 19 mm Column B lvl 1, 19mm beam A lvl 1, etc) Especially when we want to make automatic bill of quantity from Revit.

[@edwinagito2302]

Hi there. Much better if they will be detailed separately. ex., COLUMN DETAILS together with their Bar Bending Schedule. Then for the BEAM Detail also, SLAB DETAILS and so forth. cheers.

[@НаташаЩекатурова]

Hi! Thank your for video. If you only could see schedules, that our constractors make. They are terrably overcomplicated. But, on the other hand, yours is too simple, so you made a logical mistake. You added an image to sertain rebar, 10M. But you may use the same rebar for another shape in your project. So it will cose a mistake in a while. You should make another schedule for category "rebar shape", and add your image to exact shape. And in your schedule you should add only the parameter "shape"

[@adityasourav]

Sir, Thank you for those nice tutorial videos. I have learnt a lot from you. I really appreciate your effort, the way you are teaching us. Sir, can you please upload a video, how can we change the title block. In place of " Autodesk REVIT" , I want to place my name and so on. Thank you once again.

[@Decodebd]

kzbin.info/www/bejne/bIbXqqiqarZqfKs

[@samahmadoke8704]

Syukron.

[@kimemasal]

need help good sir. my stirrups has different row and i cannot group them into one row to have a total quantity.

[@usmanaliyuhajji9664]

Hi. please I need your help. my rebar family folder is empty please help me with it if you have. Thanks

[@gracemegumi4336]

Hello how can I download images on bar schedule?

[@balkanarchitect]

They are available to anyone that joins my Patreon page, the link to that is in the description of the video 🙂

[@احمدشدادي-ي6ع]

Importance marker But I have a problem. When I save the file as a PDF, the rebar images appear with a very poor resolution and it cannot be printed with this resolution. Can anyone help us?

[@احمدشدادي-ي6ع]

Importance ::::: But I have a problem. When I save the file as a PDF, the rebar images appear with a very poor resolution and it cannot be printed with this resolution. Can anyone help us?

[@jesusalejandrogomez6037]

quiero mi saludo

[@ahmadrajab3497]

C & D it's big than A and B=D not logic... thanks Bulkan

[@altamashali75]

steel bar thickness isn't increase when i try......any one has this same issue.....?

[@arock6084]

Dear sir, How are you today. My self is Imran i belong to india. I am a 2d autocad structure designer. Nowdays i am getting revit structure trinining. I need some help in revit structure like How to make beam column elevation and section detail templates. If you maked all ready a video on it than sent me link for it. So i can resume my training again. Thanks

[@JMWLSPACE]

🔥Check this out they are posting for beginners #residendialbuildingdesigns

[@ahmedalgloos2746]

Picture sire you should give it free.😀😀😀

[@eng.hassanbagdady5526]

You should notice the dimensions C is not equal to D !!!!!

[@CanadaNickciN]

A, B, C, D in the schedule doesnt match the pictures

[@احمدشدادي-ي6ع]

Importance marker But I have a problem. When I save the file as a PDF, the rebar images appear with a very poor resolution and it cannot be printed with this resolution. Can anyone help us?

[@احمدشدادي-ي6ع]

Importance marker But I have a problem. When I save the file as a PDF, the rebar images appear with a very poor resolution and it cannot be printed with this resolution. Can anyone help us?