Rebuild Inline 6 Cylinder Diesel Engine of Bedford Dump Truck || Overhauling and Repairing Engine

Rebuild Inline 6 Cylinder Diesel Engine of Bedford Dump Truck || Overhauling and Repairing Engine
#dieselenginerebuild #восстановлениедвигателягрузовика #howtobuildacumminsengine

[@kesaranpasaran2630]

Each guy has torque preferences, so if you need to tighten it 40Nm, you call ahmed, 100Nm : call abdul, 400 Nm : call amir and aziz

[@LSD123.]

lmao

[@Mr_Meowingtons]

they make me not worry about torque specifications at all. if that shit lasts then that 396BBC i did 15 years ago shod be fine lol

[@juandoe4934]

Haha 😂

[@cianophoaz9610]

Love this comment lol each guy has their strength dialed to a certain torque range haha

[@vaux_wolf4281]

Everyone is too quick to judge, these people only work with what they have and can afford, they work hard, probably harder then most of us. If that engine runs another 10-20k well that’s money earned for them. Me personally think they did a good job on it. Just my my opinion

[@gb4408]

No plastiguage here fella. It spins, clearances are spot on

[@BACKFIREFUR]

Holy heck. The cracks in that flywheel.

[@graysonedwards8875]

That's what I was wondering to

[@thejackofeverything7961]

Those are speed cracks, for high performance clutch cooling. Very inovative! ....lol

[@SedriqMiers]

high mountainous regions considerable pressure on the clutch hence the cracks on the flywheel.

[@masoodb2464]

Awesome! American born Pakistani here. You see the craziest stuff traveling around Pakistan. I rebuilt the 283 in my 1962 Chevy Impala back in day. Took a couple days. These guys do their engines in a couple hours.

[@user-do4hz2wp2n]

Лично мне понравился маховик, притирка клапанов всей плоскостью безо всяких там фасок и т д, особенно удивил универсальный динамометрический ключ, тянут и колено и голову. Но кто бы что не говорил, ребята собрали в песке, оно завелось, работает и будет ездить, а сука соберешь в чистоте и по мануалу - не факт что заведется!)))

[@qwertusboris4879]

работает но чую недолго )

[@gset1000]

чет я не заметил, чтобы они клапана притерали.

[@LordEriolTolkien]

It seems wherever you go in the world, there's always some blokes pullin' machines apart, an d puttin' 'em back together.

[@Exnay777]

You have to be impressed if nothing else, by the discipline they show. Work with what you have, repair with what you know...started watching this series recently and gotta give them credit...

[@ErikS-]

You seriously have no clue what you are talking about! This is the most damaging installation of piston parts I have ever seen. And that is even separate from the engine oil that clearly flows on the open soil.

[@graysonedwards8875]

@@ErikS- They do what they can with what they have and watching the old man shows he knows what he's doing. THIS FROM A GUY WHO WATCHED A MECHANIC REPAIR A VACTOR WATER/HYDRAULIC PUMP WITH A SCREWDRIVER AND PLIERS

[@patg3424]

Decking the block over there means dragging the block through the dirt on its deck.

[@wooddawg4868]

Now you see why ford, GM, and American motors were kings in automotive production. That work their doing is to labor intensive.

[@karenatha7890]

The only thimg I'm interested in on a cruise ship is watching the engine room. So when I went on a one day trip, they said NO..well I just walked myself up to the bridge and asked. The captain was watching the world cup in his boxers (and blushing). But after telling the crew to show me the bridge, he took me to the engine room later. Ship engines are way more amazing than their casinos! To me anyway. Really nice guy. Said all his family only wanted to go motor boating back home. With a loving roll of the eyes. I'm grateful that I was allowed, with total respect, to see something I am truly interesting to me. These videos are fascinating and relaxing. Thanks.

[@eano2114]

I've never seen so many hands building one engine in my life.

[@Chris-yy7qc]

For a reason.

[@eano2114]

I would yeah like, right? Or something like that... but I'm not really sure What kind of context your saying that.

[@Chris-yy7qc]

​@@eano2114 As a reaction to your post. Its bad when that many people work on an engine because its likely that something will be forgotten in the process because of misscommunication and assuming. Thats why only one person assembles an engine in highly sophisticated engine factories. "One man one engine". And thats why you've "never seen so many hands building one engine in" your life. Because its a bad idea and thats why its beeing done different nowerdays.

[@eano2114]

@@Chris-yy7qc yesssir, I've worked on cars for a few years myself. Anytime a rebuild was needed, ONE mechanic did it. If the engine needed replaced, one mechanic would do it. Obviously with alittle help from another mechanic at times. You are very right though, there is Hundreds of parts that go I to building an engine, if one part is missing it could forsure cause issue. If one part is loose (mainly engine bolts) it could cause major future issues. So. I doubt this engine they build lasted long. But who knows, indian ppl are crazy.

[@jw33]

R.I.P. cam bearings at 24:31....

[@DirtForester]

Yup

[@montneymon-ta-knee6810]

the dings are for oil pooling

[@CraigOlove]

Love the spring compressor . I may have to use that Idea some day. Thanks..

[@Chris-yy7qc]

Good idea if you want to lose a finger tip.

[@OPyamumsyadad]

Putting the retainers on the valve stems using Plier handles and the man’s body weight had me on the edge of my seat. One slip and you’re off work with a smashed finger. I hope they work out how to make a simple lever operated valve spring compressor that they can use instead.

[@cianophoaz9610]

scariest shit, then again they probably compress coil springs in a similar fashion so this is nothing lmaoo

[@OPyamumsyadad]

@@cianophoaz9610 honestly, I’ve been that guy to undo the top nut on the shock with a rattle gun whilst a friend is standing on top of the spring, and we watch and giggle as the strut shoots across the yard. But unlike these guys we were wearing proper shoes 😂

[@cianophoaz9610]

@@OPyamumsyadad a man of no fear, I envy you haha

[@losarpettystrakos7687]

34:00 High precision torque wrench. ;-)

[@user-pr3il4ot2e]

Маховик - великолепный. А гильзы оказывается можно просто руками "запрессовывать")))

[@DonAauKind]

А чем ты их прессуешь, кувалдой?

[@hitmn2011]

It's hard work, but great work, thanks my friend, for sharing, good night

[@Spawn303]

Yeah, you’d get good at rebuilding an engine if you’re having to do it every 5k miles

[@LordEriolTolkien]

Safety sandals are popular in pakistan, apparently. If you wore sandals to a machine shop in my country you'd be in trouble

[@vggs80]

Eso sucede porque en tu país todos los varones sufren de excesiva sensibilidad femenina, y bajo contenido de testosterona, y solo pueden hacer las cosas con trajes de astronauta y muchos preservativos para sentirse seguros y aún así ser incapaces de reparar algo

[@MrMercurymark]

Dentro das condições fazem um bom trabalho! E felizes!!!! 👍🏼🇧🇷

[@ronaldobh1966]

Fazem o melhor trabalho possível, com as ferramentas e estruturas rudimentares que eles têm, e funciona muito bem. Têm o meu respeito 👏🏻👏🏻👏🏻👏🏻

[@patg3424]

Do they even gap the rings? 160 Ft pounds means that if a 160 pound man can hang on the wrench without it moving. You got to give these men credit for getting after it reguardless of how they do it.

[@old_dudetim8908]

and the heat cracks on that dam flywheel makes the San Andreas Fault line look good !! lmao

[@gb4408]

Mains are torqued to spec. I love the simplicity and lack of complexitity. The head seemed to be faced.

[@tihamid5190]

الله..يرزق..من.يشاء.بغير.حساب..صدق.الله.. العضيم....🤲

[@niallmurray7521]

Rumour has it they do the warranty work for Roll’s Royce engines as well.

[@squirrelynutz1]

Man I wish we had safety sandles in the 🇺🇸

[@graysonedwards8875]

SIZE?

[@stephencooney9870]

Ive never seen a flywheel come out of an engine that looks like this, BUT its going in! I bet this engine runs forever, or until the truck falls of a mountain.

[@ranze63]

Actually Hino HO7D Diesel Year: 1991-1997 Engine type: HO7D CC: 7412 Horse Power: 180

[@michaelbedell6523]

Interesting in putting the pistons into the sleeves first. Regardless of the simplification, it’s good to see what it entails to rebuild a motor. Who knows if torquing is overrated when we don’t get to see the lifetime of the repairs.

[@cidaomecanicapesada1160]

Eu tenho respeito com estes mecânico, são verdadeiros mestres doutores , não tem uma área pra trabalhar sem condição, mais mesmo assim o trabalho fica bem feito e limpo

[@Mark_Ocain]

LOL...no OH&S auditors to worry about here obviously LOL..I have to say, these lads are a resourceful bunch to attempt so much with so little. Without a clean assembly area, I don't think this engine will last near as long as it should.

[@binnereitsma2955]

Woman Work Very Hard.

[@KuntalGhosh]

after looking at that flywheel , all i would say is they have many more things to worry about than just the torque wrench lol .. man o man that fly wheel looked real sad , i have never seen one so badly cracked .

[@Mr_Meowingtons]

yeah for real i was like holy crap that looks BAD they make me not worry about torque specifications at all. if that shit lasts then that 396BBC i did 15 years ago shod be fine lol

[@KuntalGhosh]

@@Mr_Meowingtons someone was really riding the clutch for hours to get that thing that badly cracked or like they wrode the clutch and then diped it in water.

[@meyawabdulaziz3863]

a washing machine water drain hose for the engine breather lool fantastic

[@lzed223]

at 26:00 The flywheel looked seriously cracked. It should have been refinished before installing. No checking the gap on the rings, Good way to seize the engine,

[@frontspring1]

They run them cracked over there. Normal

[@drfiberglass]

Cracked and glazed. It won't last long...

[@lzed223]

@@drfiberglass All of India can't be like this shop? This has to be the poorest section where nobody has money to buy anything?

[@armedpreacher]

@@lzed223 it’s Pakistan, not India

[@user-ct1mi1dl1x]

Cool work sir thank you very much 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@71usmc]

I'm guessing they rebuild every 10k.

[@tahirusman5929]

Not really.They do 250k easy

[@HonorableBeniah-A]

44:15 is that olive oil?

[@cotyrubin8769]

26:13 how much time y’all think that plate has left on it ?

[@10swatkins]

I was cringing when I saw that!

[@montneymon-ta-knee6810]

about exactly the time they put it in the truck

[@Chris-yy7qc]

It will hold up until the next engine rebuild no problem! (In approx 5k miles...)

[@piperdoug428]

Only thing that i didnt see was gapping the new rings, the pump guy dumping the banjo washers on the dirty dolly was a bright one

[@bokalfishing]

it's a great jod I'd like this kind of work,very skillfully,

[@user-iw7yg4vx7i]

Молодцы,рукастые

[@luckyjfishing6609]

Watching from pilipins god job idol

[@andreye5594]

Жуть какая халтура ! Ничего не почистили, прокладки ставят на поверхность с грязным засохшим маслом, думаю у такого ремонта небольшой ресурс будет

[@user-zz3nh5dn3g]

Если бы у них была плохая репутация , хрен бы кто к ним пошел - сарафанное радио быстро работает .А они молодцы - за полдня пересыпали движек и довольный заказчик уехал ....

[@alekseykirillov2359]

О ужас! Не помыли. На полу. Без очков. Грязными рукам. Всякие железки суют. Вообще фубля в сандалиях. Торопливо. Плохой ремонт, работать не будет.

[@user-fj4hu8vg3e]

А я хотел к ним свой движок везти на ремонт... Тогда не поеду, пускай без заработка страдают...

[@Leonid_01]

@@user-zz3nh5dn3g Так это говорит о том, что в других сервисах еще хуже )))

[@sadiq_akbar_taranwal]

Congrats to everyone who is early And who found this comment 👏 ❤

[@psvyme48paulh45]

Great Job nice🙏👍🇬🇧

[@thehashmi]

مبدعين متابعكم من ارض مكة المكرمة

[@clerivaldoalves1512]

Equipe toda sincronizados. Porquê vcs não arruma uma bancada para trabalhar? Sempre admiro o trabalho de vocês. Abraços

[@nunchako]

The claxon lover´s

[@fariassolucoespraticas1487]

Tem meu respeito trabalham a ceu aberto com profissionalismo

[@GrumpyHarleyRider]

torque wrench..... BUY ONE!!!

[@jimandjackandhank7938]

I wonder if they charge extra for all the sand in that engine

[@OrlBl]

Awesome.

[@TECHNOP.V.A.]

В таких условиях производят ремонт двигателя! Браво мастерам!

[@Shadow-ii3sb]

Бронзовый век

[@alekseykirillov2359]

т.е. если ты не оплачиваешь керамогранит, секретаршу, пару манагеров и мерин директора, работу техников можно обосрать?

[@Leonid_01]

Вот если бы еще показали как работает этот мотор ))

[@personconsertoseinteratividade]

Show de bola muito bom

[@mikescalise8380]

Nothing like working out in the dirt.

[@KonstJatmz]

кожаный засухариватель)

[@valeenoi2284]

Not knowing much about cars in general, but does that flywheel look ok? For someone who has only seen general engine components in the diagrams and animations, this was surprisingly interesting to watch. How do they even remember to put all those nuts and bolts in place? I guess if you've done a few thousand times, you'll go with the flow. No safety in mind either. Their bodies will fall apart at age 40.

[@paulb7334]

They could probably do good work if they had the tools and equipment to work with

[@mixdiver12]

I figured it out.. those guys are skilled at SHORT TERM repairs and fixes… No warranty involved. You cannot make new with old forever. ( not replacing with brand new parts ever ) So hat off to them for their hard work, but whatever is “fixed” will be back in the shop in no time. The filth and dirt they pick up along the way and the old unfiltered oil they pour back will make sure of that. That is why you have no product MADE IN PAKISTAN, except clothing

[@eduardopaiva5153]

Aprenderam com o Giovani mecânico sem dúvidas..

[@margarita8442]

good work

[@user-if2uf2zd8x]

11:20 Без прокладки поставили ))

[@neophobiagarage1845]

amazing 😀👍

[@khiangtetlangval6398]

Good job

[@johnyoung4467]

Amazing how much can be achieved with so little.

[@Brimannn1]

I can just imagine how many serious injuries happen every day in this shop!

[@travelling_stephen]

What makes you think they have any!!!! Just because they don't have fancy workshops and lifting gear. They are probably more aware of the dangers than you are and don't forget they will not get any pay if they have a accident.

[@beastscientist]

U are damm Right bro I was tighting the shock and the wrench slip I hit my face with a good tool and safety I would not be hurt so u r not wrong it really is .....

[@Dec38105]

@@beastscientist just because you hurt yourself it doesn't mean everyone is so clumsy

[@agt155]

@@travelling_stephen Yes, back before H&S no one ever got injured.

[@BACKFIREFUR]

These guys show what the United States industrial revolution was before OSHA was around. You just got shit done with your hands and common sense. Not having to work about the safety man writing you up for not having a hard hat, steel toe boots and a crane operators license to sweep the floor.

[@DonAauKind]

Это короче мы с тестем почти так же собираем. Но конечно есть чему поучиться, клапана засухаривать, например. Но вот чего я до сих пор не пойму (это видимо именно индийская фишка) это зачем прокладку ГБЦ мазать краской.

[@rogerdeane3608]

Why paint the head gasket ?? The cam shaft was installed without any care.

[@osmanefe4019]

Süper eline saglik

[@scottybear6265]

What is wrong with theses guys cleaning a motor for a rebuild and using a rag full of sand in the water , don’t they know what’s going to happen , they have over torque the bolts that are all ready fatigued there getting it ready for failure

[@lieutenantdan8541]

Its alright, when the engine fails they will just find another way to last another 50 hours

[@mnadeem3755]

yar ye local mchanic v kasy khochal hoty hai kam karny ka ptaa hi nahi

[@pjtovar8888]

Wow.. amazing and skillful work

[@jamesmckay9966]

If they Lapped the Valves I missed it. No Torque wrenching any where. Very little assembly Lub. Any way you look at it, it could have been much better.

[@yeaho7935]

America want ever auto parts you can make

[@lex612m]

Динамометрический ключ,нее неслыхали, оправка для установки корзины это для дилетантов, маховик в трещинаж похрен, Бля этож как волговский движок,за такой ремонт меня б выгнали с работы.

[@markellis7819]

What make is the actual engine?

[@jimydoolittle3129]

They’re awesome people and a very good mechanics 🧰 👏🙏🏻💪

[@TheSchafsviech]

Satire?

[@juhomaki-petaja]

@@TheSchafsviech must be

[@amilhollywood3880]

que precarios que son, sin tuerquimetro, herramientas de medicion, etc.

[@rodcamacho7853]

!!!!!MARAVILLOSO!!!!! CUANTA CREATIVIDAD

[@westozzie62]

Good job by great workers.

[@KonstJatmz]

маховик еще походит)

[@ismarjayaautochannel]

Pertama nyimak mas bro

[@chaser8598]

Разве можно маховик в таком состоянии ставить?

[@gset1000]

Индусам можно. Они бессмертные)

[@delshekasteh499]

good

[@handle1004]

👍👍👍

[@sadiq_akbar_taranwal]

Amazing 👏 ♥ 🙀

[@chethanchethan8110]

Which contry

[@omarfonseca7397]

Son unos tremendo mecánico

[@Desbelugas888]

Here the masters faint for the same job and plant figs in his hearth.

[@praveeinkrishna0102]

Amazing work ..🥰🥰

[@TheMechanic868]

Thanks ☺️ u

[@webladrao7838]

Bacana mano

[@codecongnghiep]

Do the trucks need such elaborate decorations?

[@old_dudetim8908]

i think it's done for good luck and safe travels , they do have their trucks blessed ..

[@masoodb2464]

We do metal flakes and pin stripes on our rides in the US. Same deal. Chick magnet.

[@Pypamid]

It always amazes me with all these know it alls in the comments. Do you not realize that this is all these people have? If they had access to better equipment and knowledge they'd use it

[@davidclements6507]

Well said Sir

[@masoodb2464]

Yep. American born Pakistani here. Many people there have nothing... and I mean nothing. The homeless crackheads in tents that we have in the US are rich by some of these guys standards.

[@danhammond8406]

I wonder how these guys are gonna deal with common rail injection at 30,000 psi, dec injection systems with all the emission derates,

[@fukgoogle9505]

Man that clutch plate surface on the flywheel was cracked badly. Should have been machined or the flywheel replaced.

[@fukgoogle9505]

Also check out 35:20 the guy on the left actually rubbing the rear end of the guy on the right.