Rebuilding a Carburetor on a Honda HRA 214 Lawnmower

[@donaldmacqueen7550]

Very helpful. Got mine cleaned up in less than an hour. Thanks.

[@harrystanley1651]

Excellent Video, very detailed and helped me clean up my carb on my 27-year old HR214. Thanks a lot.

[@davidgpo]

Thanks for watching!

[@thewiseguy7100]

I’m a small lawn mower repair technician, and first time I’ve owned this HR214 , didn’t know how the carburetor gasket line up.

[@davidgpo]

Thanks for watching, all the best!

[@jdkrxw]

Good video. In a pinch, the main jet can be taken out and cleaned without removing the carb. This solves 90+% of fueling problems. Remove the bowl and find a flat blade 1/4" screw driver bit that's about an inch long. You can use a bench grinder to get the shape that works, and use a 1/4" wrench to turn it.

[@davidgpo]

Thanks for the helpful tip and thanks for watching!

[@normanbfifteen3468]

Man I must say...you have patience... you did all this with mower on the ground.

[@davidgpo]

Thanks for watching!

[@routtookc8064]

The plate sitting on the front of the carb, was it flat? I have mine apart and the plate has a slight curve to it.

[@davidgpo]

It is flat.

[@routtookc8064]

@@davidgpo thanks

[@dearthworm]

FYI. Shutting off the fuel and running the engine until it stops does not eliminate all fuel from carb. The float bowl will still have gas in it. You need to drain the bowl using the drain screw.

[@glennkubik3774]

Quite sure Gasoline breaks down Silicone, gunky residue. But very good Video 👍

[@davidgpo]

I believe that you are correct. Thanks!

[@dominikwojtas2550]

Hi , that's amazing content!! Your not smoke at all!!! Change you piston rings allready? Greetings from Poland 😉

[@davidgpo]

Still on the factory rings. Thanks for watching!