Glad you're still getting the car fixed. This channel popped up on my timeline a few weeks ago and now I'm seriously invested in seeing this car on the track.
@AsherBenson2 ай бұрын
Bro plz upload I can't wait until the next episode 🙏🏽
@johnnywinstoneАй бұрын
Hope all is well. Loved all the other episodes.
@5speedsimracer5 ай бұрын
Been waiting for the next video man! I can't wait to see it out on track for the first time! Keep it up bro!!
@DEKarting5 ай бұрын
@mardigmasrian5857 lol what?
@mikenowland27394 ай бұрын
Hi Michael. Just discovered your channel due to a thumbnail that came up on KZbin. I own Tom’s race car he had before yours and my mate has Jim’s. We bought them when your car was under construction and I had a look at it being built in Brisbane. That would have been around 12 years ago . Tom was a pretty stocky Irishman and he would have had a tight fit in the Speed . He was a former Isle of Man TT racer and had an impressive collection of Race bikes. Good luck with your build
@danielcgomez13 күн бұрын
Hope you are well mate ...just thought to stop by and see if you've had any progress on this fantastic build. Take care.
@tobiasp3392Ай бұрын
Everything fine? Would love to see a new Video 😊
@aMaff5 ай бұрын
Great video! I've been doing similar swapping a VERY-not-made-for-my-car transmission into it over the winter and having to make a removable transmission tunnel cover. Quick tip for finding pre-existing holes for a panel like you're making: cut the head off a screw and grind it to a point. Thread it into the hole, then use that as a punch for the cardboard or aluminum. Bonus points if you grind flats on either side of the points to use a wrench or pliers to install and remove the punch in the existing threaded hole.
@JERRYIRWIN415 ай бұрын
Well done you.... We all have to start somewhere and I think you are doing a cracking job. I started designing, building and racing cars 25 years ago and I'm still on a learning curve. ( present build is a GT40.) Keep up the good work, it WILL be worth it in the end. 1st time out on track testing, and you will forget all about the hassles ..... Jerry ( UK )
@marianojimenez68585 ай бұрын
Keep the vids up this is my dream current senior in mechanical and motorsport engineering ready to graduate and start my own build asoon as possible 💯💯
@farr12605 ай бұрын
Been waiting for you man! Great to see progress on the build ❤, Youre legit an inspiration for trackday/race hobbyists like me. I do understand the time sinks it takes to build and shoot video just please keep it up. Cant wait to see you down in track!
@DEKarting5 ай бұрын
Great to see you still working away Michael! Can’t wait to see it all come together and you tracking it.
@DEKarting5 ай бұрын
Also great to see your aliexpress lights are still blinding!
@stevelogan67065 ай бұрын
It is awesome to see you overcoming challenges and using simple techniques to improve the car. Keen to see you get out on the track to enjoy all of your hard work!
@gonegliding29665 ай бұрын
Good to see progress again. Green scotchbrite pads are the goto for deburring/sanding aluminium.
@TTRacingYT5 ай бұрын
Thanks for the tip!
@jamesevans16015 ай бұрын
As a fan of Superfastmatt, your rate and consistency of updates is perfectly acceptable. 😅 If even the seat-pouring becomes a three parter, I will happily watch it all.
@yesashrealАй бұрын
keep posting again!
@axelSixtySix5 ай бұрын
Michael, the jigsaw is still the right tool for the job, but you'll need to sandwich small metal sheets between two pieces of sacrificial 4mm MDF (or hardboard) to prevent them from vibrating and ensure a clean cut.
@R3troZone3 ай бұрын
I just sat here for the last couple hours and watched every single video one after another. Here have a sub.
@sprocket2cog5 ай бұрын
There is three types of shears, you have center cut shears, there is left and right cut shears that go around corners. Normally the handles are different colours so you can tell what one you have
@TTRacingYT5 ай бұрын
Didn't know that, cheers. Bunny Ng's only had the one type.
@sprocket2cog5 ай бұрын
@@TTRacingYT no worries, the other colours for aviator snips are red and green normally
@onkelben54465 ай бұрын
Finally a new video ❤🔥❤🔥
@zakooza16 күн бұрын
Waiting for new vids
@cmh81335 ай бұрын
Well done. Persistent and perseverance gets the job done.
@antcap3935 ай бұрын
its been a pleasure following this channel
@reyhan77185 ай бұрын
can't wait for the next video
@minibigs52595 ай бұрын
Good show
@AW33COM5 ай бұрын
I owned the Speads RM02. They were good. Very fast. Only 1 second slower than top of the class car.
@sacrificialrubber7795 ай бұрын
They have different shears for left, right and straight cuts. Color coded
@MUCKLEECH5 ай бұрын
YAY NEW PROGRESS VIDEO!!!
@Robin-xe4yz2 ай бұрын
yeah bro "totally turnkey ready to drive"!
@marianojimenez68585 ай бұрын
Lets goooooo
@jeffallen338214 күн бұрын
No update in 5 months?
@poida975 ай бұрын
Hey Michael, to make those angled bolts easier, maybe change them to studs?
@chuckthetekkie5 ай бұрын
Too bad my dad wasn't still alive as he was a sheet metal worker by trade with over 30 years experience and I'm sure would have done a video chat to help you out. He was one of the construction workers that helped build the Twin Towers in New York City back in the 1970's. He was always called to do any finishing work as he was well known to do things the right way and make it look good. He could weld two pieces of sheet metal together and you wouldn't even see the seam. It'll be 16 years in June since his passing.
@leckerewaffel58993 ай бұрын
Bro that sounds crazy, and also R.I.P to your dad
@Frostfly5 ай бұрын
with half mill aluminum you could almost just use scissors.
@hayman12225 ай бұрын
@mardigmasrian5857 your separating the body of christ, the Lord wouldn't want us to divide ourselves.
@murk3005 ай бұрын
just wondering, why not buy custom laser cut piece shipped to your house. I’ve seen other youtubers use services like that and it seems good
@TTRacingYT5 ай бұрын
I guess I could have. I think I would have ended up templating in cardboard either way, and from that point it's quicker to just trave and cut.
@MumrikDK5 ай бұрын
They're all sponsored by sendcutsend.
@largkat5 ай бұрын
Won’t you need a racing halo?
@TTRacingYT5 ай бұрын
Halo is needed depending on the rules for the series. Mine doesn't require it. I would prefer if the car had one but I'm not sure it's viable to add one now.
@largkat5 ай бұрын
Oh ok
@BLITZKRIEG15 ай бұрын
come on mate, we call it a texta over here😂
@MatchaUnwrapped4 ай бұрын
new video when?
@GeorgeGraves5 ай бұрын
2 hour job.
@TTRacingYT5 ай бұрын
Come and work for me 😀 Most of it was pretty quick, minus the trips to the hardware and getting the final bolts in.
@GeorgeGraves5 ай бұрын
@@TTRacingYT You can't afford me.
@radialorbits5 ай бұрын
Yep. But then, he's buying Alu from Bunnings... No idea
@GeorgeGraves5 ай бұрын
@@radialorbits Not to worry - he's got the cool shirt - so we know he knows what he's doing :)
@radialorbits5 ай бұрын
No seams permitted in firewalls. 0.5mm Alu is terrible material for a firewall. Woeful fitup & sheet work. Please stop.