Rebuilding a Tsunami SNM 100 - Part 2 - Assembly

Building up the repainted Tsunami SNM 100.
It will be up for sale soon, so if you're in Singapore, look for it on Carousell.
When it is up for sale, there will be 2 handlebar options (drop bars or bullhorn/ pursuit bars).
Specs:
- Frame: Tsunami SNM100, Gen 2 (aluminium alloy frame and fork)
- Headset: OEM
- Wheelset: Brandless rims to Cornflower hub (front), Cornflower rims to HB4500 hubs (Rear) - both around 80 -90 % trued
- Tyres: Shinko Golden Boy 700 X 25 C (front), Kenda 700 X 25C (rear)
- Crankset: OTA, 48 teeth, on a Neco square taper BB (Crankset has protective stickers applied)
- Rear cog: Brandless, 18 teeth
- Chain: KMC HV410, with brandless chain tensioners (aluminium alloy)
- Pedals: Wellgo resin pedals with brandless straps.
- Seatpost: Kalin 27.2 mm, aluminium alloy
- Saddle: BTwin saddle (the Fizik Arione saddle in the photos are for illustration only)
- Stem: Decathlon BTwin 9 degree 90 mm stem, with brandless carbon fiber spacers, Redshift donut motif stem cap
- Brakes: Radius rim brakes
- Handlebar: Uno 400 mm drop bars or FMFXTR bullhorn/ pursuit bars (420mm), brandless foam tape.
- Brake levers: Cansucc inline levers or bar-end levers
- Weight: between 9 - 9.5 kg (depending on choice of bars)
#tsunami #tsunamibike #cycling #bicicleta #weaponbike #fixie #fixedgear #fixedgearbike #bikebuild
not #Engine11 #Skream #Liberty #Constantine #Pizz

[@infinitum2884]

Hello! The Tsunami bought on aliexpress is the same quality as ifwe bought it from the manufacturer?

[@user-dv9pd5rw9g]

подскажите кто в курсе..какая длина каретки под кавадрат нужна в раму tsunami чтобы не было Chainline?

[@dalecruz4754]

what king of bottom bracket is compatible?

[@watchesnwheels]

If you're asking about the size, well these are usually a standard 68mm long. So any square taper or Hollowtech-compatible cartridge would work. As for whether u want square taper or hollowtech, it's up to you. Personally if I want convenience I would pay a bit more and go for the Hollowtech types.

[@buttlesschap]

Does it come with the front brakes originally from Tsunami?

[@watchesnwheels]

I don't think Tsunami makes brakes natively. The choice of brakes depends on where you buy and assemble the bike.

[@minhthaonguyen5693]

Nhìn chân tay lóng ngóng thao tác ,công thêm cách đeo gang tay làm cho no vướng víu,vậy ma cũng dám quay clip

[@HouseMixtapee]

черная тормозная дорожка стирается от тормоза ?

[@watchesnwheels]

Sorry - not sure if the translation is accurate... but you're concerned about whether the brake hose is wearing off the paint, then, no.

[@Since_my_God]

Обмотку не в ту сторону мотнул 😮

[@kurtandreibadillo2215]

how tot remove that clip in missing link in the chain?

[@watchesnwheels]

Which one? The HV410 chain?

[@kurtandreibadillo2215]

@@watchesnwheels i think?

[@watchesnwheels]

@@kurtandreibadillo2215 you will need 2 pliers - one larger and one smaller (preferably a needle nose one). Ideally the larger one should be a quick link plier. Pinch 2 pins with the larger plier then use the smaller plier to pull the quick link plate away. The quick link really is just held in place by chain tension.

[@johnbravo7542]

The way you wore those rubber gloves was triggering my OCD.

[@watchesnwheels]

I've sweaty palms. Gloves don't go on easy. 🤣

[@stuvademakaroner9607]

Move the damn seat forward

[@watchesnwheels]

The saddle is already at its most forward position. 😂 I need room for my, uhm, jewels.