Hey everyone, quick update! I have a press drive I'm attending for the first half of next week so my plan is to get the 240 aligned when I get back at the end of the week, pending weather of course. Thanks for watching!
@JNorth876 жыл бұрын
Hey Kyle! I think this is one of the best videos you've ever done. Good work!
@saabkyle046 жыл бұрын
Thank you!!!
@makalaga566 жыл бұрын
i'm just curious. How much money have you spent on all the work done to this car? Im not talking like: "You could buy better car with this money spent", im just curious how much money compared to wehicle base price is put to this day. Thanks :)
@saabkyle046 жыл бұрын
I really don't know the exact amount (probably for the best at this point haha), but to give you an idea, the brakes alone cost as much as the car did. It'll be such a special car when it's done, but to do it at the level I'm going for, it hasn't been cheap. I should do a video on it at some point haha.
@Happyman-od7zp6 жыл бұрын
Morning Kyle, loving this series! Hope you have a great day!
@N7Bluerose6 жыл бұрын
This was my Saturday morning cartoon. Thanks Kyle.
@Underappreciatedclassics6 жыл бұрын
Foxtreal Same bud, good morning!
@saabkyle046 жыл бұрын
Thank YOU! Have a great day!
@saabkyle046 жыл бұрын
Good Morning!
@N7Bluerose6 жыл бұрын
Joseph Linz Same to you. 👍
@_zach6 жыл бұрын
Omg that whole underside is really looking great Kyle! I really like how much attention to detail you're putting into the build here. Definitely one of my favorite restoration projects on KZbin right now, keep up the great work man!!
@brandenongkp6 жыл бұрын
As good as new or even better.
@siangetz88086 жыл бұрын
*Out with the old and in with the new* CHRISSHHFIXSSHHHH
@simengundersen88616 жыл бұрын
This is hands down the cleanest 240 i've ever seen
@mentallyhandicappedpoptart26496 жыл бұрын
Awesome video as always Kyle will never stop watching 💪🏼👍🏻
@808faccio56 жыл бұрын
CloroxBleach we meet again
@saberphillippe34266 жыл бұрын
ALMOST IN EVERY VIDEO I SEE YOU!!!!
@pwilk9246 жыл бұрын
the inspiration is real!
@insertausernamehere45156 жыл бұрын
The suspension looks brand new from factory its amazing
@saabkyle046 жыл бұрын
Thank you my friend!
@insertausernamehere45156 жыл бұрын
Saabkyle04 you welcome :D
@fahisaurus6 жыл бұрын
Love your attention to detail with using a torque wrench and marking torqued fasteners.
@YoBoyNero6 жыл бұрын
Those wheels look so gorgeous on your 240 especially with that color
@rjprz59296 жыл бұрын
This car is super awesome, that RB25 will be a monster.
@smithraymond090296 жыл бұрын
Kyle is like a surgeon. I work the same way. Very organized, neat, thinking of longevity, dealing with systems, not parts.
@saabkyle046 жыл бұрын
Thank you!
@bhumiriady6 жыл бұрын
Spectacular video as always... That installation is so difficult, but fun at the same time! It's definitely worth the work. Good job!
@zzz56026 жыл бұрын
The channel that made me a car enthusiast.
@Cekocraft6 жыл бұрын
The suspension looks amazing! Good job, Kyle!
@tchp39886 жыл бұрын
I'm glad that you did a collaboration with chrissfix. That's how I find your channel :D. Btw can't wait to see you drive this baby.
@klal6 жыл бұрын
SO satisfying!
@saabkyle046 жыл бұрын
Thank you!!
@trollaphobic6 жыл бұрын
Everything just looks so clean and nice! Gaaah. Its like you wanna drive it but never wanna drive it 😬😬😬😬. So excited for you.
@JacobFrey6 жыл бұрын
Wow, you're doing an incredible job with this, Kyle. I love your car!
@elijahburrell24726 жыл бұрын
This car is gonna handle so good
@T.MaDom256 жыл бұрын
I've been watching this Guy since I was in the six grade and I graduated last year. so yeah he's one of my favorites 😊
@Likethetacosauce6 жыл бұрын
Looks good man!!! Can't wait to c a driving review
@charlesescarria37263 жыл бұрын
Rear suspension looks sick
@bluecollarjose6 жыл бұрын
You and Tommyfyeah have the best builds.
@jorgejacop6 жыл бұрын
This video made my weekend! Thank you for another update on the 240! Can’t wait to see this beast done!
@RemiPut6 жыл бұрын
I'm pretty jealous you can do this all by yourself , great and interesting vid Kyle 👍
@saabkyle046 жыл бұрын
Thanks bud! It hasn't been without struggles, but I enjoy the challenge of learning how to do all of this :)
@RemiPut6 жыл бұрын
You're welcome , that car will be basically brand new , enjoy it a lot to see how you make progress 👍
@shawnprickett40996 жыл бұрын
Right now you could say its a handling sleeper with the only indication of its performance being the lower height and wheels. Once you put the RB in it its gonna be a beast.
@MrSuperGamingSir6 жыл бұрын
Faaaarrrrkkk man when you set it down and it set i was in love never liked the wheel choice but now it looks amazing by far the best series on youtube right now congrats man
@JosephJonesJRJ6 жыл бұрын
My favorite projecton KZbin. It's fun wrenching vicariously through you, Kyle. Looking forward to seeig it on the road after all this work.
@mannys91306 жыл бұрын
Your work is so thorough and proper Kyle. Excellent job. It's going to drive like a dream!
@StreetersGarage6 жыл бұрын
Looks great Kyle. Attention to detail pays off in the end. Great Work!
@royl67156 жыл бұрын
You should consider publishing parts lists! I know that'd take a ton of effort but it'd be pretty useful for folks rebuilding their S13s.
@eaglesquade.s13006 жыл бұрын
The 240 is definitely going out awesome. You have done a great job.
@Highway945 жыл бұрын
Ive seen several of your videos show up on the recommend feed, but never really paid attention to it. This video was by far my fist video of yours i actually watched and wow, you sure do know your stuff! Good job , Kyle im defnitely going to sub and look at more videos, hopefully i can get to your level of knowledge one day haha
@vezitalohe32626 жыл бұрын
Cleannn👍
@jabonky6 жыл бұрын
Look at all that newness under there. Looks great!
@grimgar85736 жыл бұрын
Thank you guys this would help allot. Thanks.
@roger31376 жыл бұрын
Honestly this is an awesome build love the process and all the details being broken down.
@danielmartinez64856 жыл бұрын
I love your car: cheap at the otside, beefy at the inside
@Aldiggi6 жыл бұрын
Can't wait for you to get this done. This journey with you has been a joy!!
@saabkyle046 жыл бұрын
Thank you for your support, it really means a lot!!
@GMcarsMAN6 жыл бұрын
It's a beautiful project car and an amazing project itself. Congratulations Kyle.
@daniellorenzo27856 жыл бұрын
Cant wait to see the end result!!!!!
@nos10001006 жыл бұрын
when a car from the 80s has a better looking under carriage than most brand new sport cars. I bet you can point the wheels in any direction and that thing will go there.
@mattzegarelli96586 жыл бұрын
The table scratch lives on! Haha nother great video!
@JamesRussoMillas6 жыл бұрын
Kyle carry the RB swap torch now that MCM is done with their 240Z!
@saabkyle046 жыл бұрын
:)
@neilomac6 жыл бұрын
It's certainly going to be a MAAAAAD car.
@tomduffy48706 жыл бұрын
I always find the 240 videos really satisfying
@mrcjstudio6 жыл бұрын
Cant wait to see you driving it. This series will make anyone want to roll up their sleeves ad mod their car
@moaazmorgan79446 жыл бұрын
This car is so clean
@saabkyle046 жыл бұрын
Thank you!
@davemcguigan2186 жыл бұрын
Great video of your suspension rebuild! You are always very thorough!
@q1v16 жыл бұрын
Hey Kyle, Your build is top notch When you are done with it you should take it to The Jay Leno’s garage
@mobne6 жыл бұрын
Love your entusiasm, good work :)
@screwsnutsandbolts4 жыл бұрын
Great videos !
@NuclearCowboyTube6 жыл бұрын
Awesome Video Series Kyle! This Car is so well done!
I think you might end up with one of the best driving 240s in the nation. I can't even imagine how much that thing is worth.
@ben1019906 жыл бұрын
Looks so good Kyle, great work...can’t wait for that driving video!
@saabkyle046 жыл бұрын
Thanks pal!!
@johnperry56316 жыл бұрын
Looks good Kyle!!!!
@danielshaysevand50966 жыл бұрын
very good informative information thank you for sharing this video
@eraclioandrade15226 жыл бұрын
Beautiful s13
@aussiebattler966 жыл бұрын
awesome video dude such a good day I'm getting my first car monday (Australia obviously lol)
@saabkyle046 жыл бұрын
Congratulations!!! Thanks pal!
@aussiebattler966 жыл бұрын
No thank you mate for putting out high quality content!! :D
@GonHemi6 жыл бұрын
Excellent job Kyle, it will handle like a dream!
@saabkyle046 жыл бұрын
Thank you!!!
@RobertKohut6 жыл бұрын
Nice!! Lovin' this series!!
@saabkyle046 жыл бұрын
Thanks Robert!
@unknownknown3606 жыл бұрын
wow .... dream car....
@ryancartwright7487 Жыл бұрын
Love to see it 🤩
@amill15636 жыл бұрын
Go all the way dude. You've come so far and looks awesome.
@saabkyle046 жыл бұрын
Thanks pal!
@caseman916 жыл бұрын
Seen that turbo manifold 😏😏😏
@icurt066 жыл бұрын
Nice job on your rear end rebuild! There are different size torque wrenches available (1/4, 3/8, 1/2, etc ) I've run into similar clearance problems in the past when torquing bolts to spec. My 3/8" toque wrench can torque up to 80 ft lbs.
@stevenbenitez18516 жыл бұрын
Cleanest build on the internet, keep it up Kyle!
@saabkyle046 жыл бұрын
Thanks Steven!!
@JusttRelaxx6 жыл бұрын
Great project!!! Keep it up :)
@ec50746 жыл бұрын
Cool rebuild!!! Video was awsome!!
@marino46916 жыл бұрын
those wheels look sick!!
@saabkyle046 жыл бұрын
Man, it took me forever to find the "right" wheels for this car! They're TE37SLs, 17X9 +22. They have a timeless look to them for sure!
@emmareporter43246 жыл бұрын
Saabkyle04 aw I love those wheels
@1mlb7046 жыл бұрын
I love these vids Kyle, great work!
@kwikscopeguy6 жыл бұрын
You talked about the bushings on the ISR arms being torn, those are simply rubber dust shields, those arms have spherical bearings like SPL arms, albeit much lower quality.
@DanaHarripersad33506 жыл бұрын
Looks awesome, Kyle! Been quietly tracking this series from the start - but this video is the best one you've done yet! Looking forward to the 240's maiden voyage! :)
@saabkyle046 жыл бұрын
Thank you so much!!
@DanaHarripersad33506 жыл бұрын
You're welcome... dang, I'm shocked to have actually gotten a response! ^_^; Safe travels and clear horizons, Saabkyle. :)
@chadwickwhite84006 жыл бұрын
I do need to save for a set of those lifts sometime.
@Leandroalemauuum6 жыл бұрын
1:55 Genius!
@xristopanagia26936 жыл бұрын
Why did it take you so long to start making videos for the 240sx?! Chris said about 1 whole year ago you would make videos for it and it took 1 year to finally upload a video with the 240. Although it took you much longer than it should I'm still happy to finally seeing the 240 again :-D
@Gatambwa6 жыл бұрын
Amazing job!!!!!!!😳👏🏽🙌🏽
@OscarDaGenius6 жыл бұрын
Wow that looks amazing
@saabkyle046 жыл бұрын
Thanks pal!
@farhangusmar6 жыл бұрын
Even better !!!!!
@musicfadel9185 жыл бұрын
Amazing
@vividvulpe98426 жыл бұрын
Good work, man!
@nazarenofernandez25496 жыл бұрын
OMG, SO SHINY.
@iceman32qs6 жыл бұрын
GOOOOOD MORNING 😃
@saabkyle046 жыл бұрын
Likewise! :D
@izhlayukio58636 жыл бұрын
You need to take this to Hoonigans for a build biology when this is done!
@saabkyle046 жыл бұрын
Sounds awesome!
@3lbtrigger6 жыл бұрын
DAMN! That rear toe was WAY out when you set the car down.
@mobne6 жыл бұрын
Have you ever looked in too rear bumpsteer?
@dannovic6 жыл бұрын
Those teflon/self lubricating bushings you installed in the hub, do they come with dust booths or doesn't any sand or water damage them?
@qferal11963 жыл бұрын
Just got into your channel! I have a ‘90 s13 and am venturing into the same sort of suspension/subframe rebuilds. I’m curious about where you got the torque specifications for all the hardware you replace.
@951berto76 жыл бұрын
Can you do a startup on the 2018 Toyota Tacoma please
@Underappreciatedclassics6 жыл бұрын
50th view, I cannot wait to see the engine swap!
@ForTehNguyen6 жыл бұрын
clocking bushings is what its called when you torque them while the car is on the ground
@saabkyle046 жыл бұрын
Ohhh, I didn't know that, thanks bud!
@jaaj73816 жыл бұрын
would you mind if I used one of your videos to use on my channel? thanks in advance.
@TheGlassChambers6 жыл бұрын
I totally understand why you changed out the suspension arms but I do want to point out that i dont think your comparison between the spl and isr arms was giving people the right impression. It looked from the video like you were implying that they were better because they are beefier/weigh more. This is not always true especially when talking about suspension arms. Not only are you adding extra weight that is not supported by suspension but a really strong suspension arm can be problematic. If you do smash into a curb the (easily replaceable) arm wont flex and break as intended and instead will transfer all that energy right into your chassis. Food for thought..
@unclassifiedjz68852 жыл бұрын
what do you use to record ? the clarity is damn good
@Ninjaboy4596 жыл бұрын
I was going to buy ISR Parts for my 240sx but seeing kyle attack them here pretty much idk if i should lmfao
@USUKallday2 жыл бұрын
Where did you get the polymer bushings for the rear lower control arms?