I really like this video. I was just gifted my first project vehicle from my father-in-law and I plan to do most of this myself. Easy to follow and simple enough.
@moonlightfordf10059 күн бұрын
👍
@JayHutchGАй бұрын
nice job! The bench seat looks great! A layer of burlap over the springs protecting the foam would make the foam last longer tho. On seat back not as important as on the seat itself.
@moonlightfordf1005Ай бұрын
👍
@samlenser899810 ай бұрын
Very well done! I've saved your video for when I have to do mine...which won't be long.
@moonlightfordf100510 ай бұрын
Thank You!, What ever they give you (hog rings) buy an extra 100!
@jtktkdo89407 ай бұрын
Your wife is going to be extra happy you did the glueing over her couch. I onow mine will glue my hands together after that lolol great video.
@moonlightfordf10057 ай бұрын
If you only saw what hit the editing floor! Wear gloves.
@JayHutchGАй бұрын
be lucky if its only yer hands she glues
@desertdaisyranch46816 күн бұрын
You just saved me $1000
@moonlightfordf100515 күн бұрын
If I had an extra 1k in my life, I’d buy 500 ice cream cones! Glad the video helped
@moonlightfordf100515 күн бұрын
👍
@michaelfolchetti46249 ай бұрын
Great Instructions!I'm getting ready to upholster my 56 Ford Victoria! Thanks
@moonlightfordf10059 ай бұрын
Good luck! Take your time and I’m sure you’ll do great!
@johnfair6223 күн бұрын
Great job!
@moonlightfordf100523 күн бұрын
👍
@andrevaldez90023 күн бұрын
Good job thank you
@moonlightfordf10053 күн бұрын
👍
@kirksnyder6190Ай бұрын
I recommend using 3M spray adhesive.
@moonlightfordf1005Ай бұрын
👍
@paulinepardue678Ай бұрын
I have a 1997 Ford 150 extended cab.im working on.my seats are in good shape.just needs to be cleaned
@moonlightfordf100529 күн бұрын
👍
@williamjohnson11264 ай бұрын
Very informative video. Thank you
@moonlightfordf10054 ай бұрын
👍
@royb22518 ай бұрын
Great job 👍🏻
@moonlightfordf10058 ай бұрын
Thank you! Cheers!
@williamgroel28809 ай бұрын
Thank you for sharing
@moonlightfordf10059 ай бұрын
My pleasure.
@1Independentrider10 ай бұрын
Did you know if you hit the old yellow foam with a clothing steamer it expands back to its original size and shape?
@moonlightfordf100510 ай бұрын
I have to remember that
@thedirtbikegoons57175 ай бұрын
Really like a clothing iron thing or like a water steamer
@timwilhelmson870710 ай бұрын
thank you this help me i have to do a c10
@moonlightfordf100510 ай бұрын
No problem 👍
@timwilhelmson870710 ай бұрын
looks good
@moonlightfordf100510 ай бұрын
Thank You!
@edmundp12311 ай бұрын
Nice info
@moonlightfordf100511 ай бұрын
Any questions just ask!
@jtktkdo89407 ай бұрын
You should tell us where did u get the new cover from, what was the side of the hog rings.
@moonlightfordf10057 ай бұрын
At the time of the Video, LMC Truck was the only place with inventory. It’s been a few months, maybe others have it in stock.
@moonlightfordf10057 ай бұрын
The hog rings, plus the extra bought also came from LMC Truck. I’m not sure of the size but 3/4 comes to mind.
@ronnietucker494310 ай бұрын
My seat is wallowed out pretty good where the driver sits. Do you need to add any foam there before covering with the big piece of foam.
@moonlightfordf100510 ай бұрын
Most seats have a large bottom foam, then a thinner top foam. You should be able to Peel and discard the top piece then add the seat topper on top of the larger bottom.. but it’s hard to be sure without seeing it
@RafterHRanche15 ай бұрын
Great video! What density is the foam? Where did you get your foam?
@moonlightfordf10055 ай бұрын
I use medium, to firm and it can appear lumpy when your stretching the cover over it at the edges.
@Thompson19577 ай бұрын
Nice,where can i get the seat cover? thanks
@moonlightfordf10057 ай бұрын
When I did the cover LMC Truck was the only place that had inventory in stock ready to go.
@TheAzmountaineer Жыл бұрын
Thanks! I think I will try this on my 66 F100. What size is the mattress foam - full size?
@moonlightfordf1005 Жыл бұрын
I used a Full size. That’s a perfect size.
@TheAzmountaineer Жыл бұрын
@@moonlightfordf1005 Excellent! My truck is a daily driver and will never be worth a lot of money. Spending big bucks to professionally rebuild the seat makes no sense to me, but this looks like a good little project.
@moonlightfordf1005 Жыл бұрын
In comparison to bringing it to a shop, this is an inexpensive project that I feel anyone could do with just a little time and patience.
@markhigdon5644 Жыл бұрын
Nice job. What brand of cover did you use Sir?
@moonlightfordf1005 Жыл бұрын
I bought the cover from LMC Truck. They are about the only ones with inventory. The bed topper can be bought any place, but Amazon is the cheapest. Good Luck!
@jeepsblackpowderandlights4305 Жыл бұрын
My 76 J10 the foam is intact and cover still there... but my springs i had like 7 broken springs. I had to weld them back to place. But i did with the seat still on. Suffice to say i had like 7 fires haha but blowing on it put it out.. seems fine now. I just made a clip about it if you wanna see