Red Paddle Co Titan 2 Pump

The Titan 2 Pump by Red Paddle Co is the world’s first purpose-built, double chamber SUP pump. It’s designed to cut the amount of time and effort it takes to inflate your board by half. Constant innovation has led to us testing the absolute boundaries of inflation technology and as such, we’re confident that there’s nothing quite like the Titan II pump on the market.
The Dual Cylinder system, combined with the Hi Flo handle means you are in complete control of the energy used to inflate your board. It puts the volume into your board faster and reduces the effort required to reach a higher pressure.
The Titan 2 inflatable SUP pump - SUP inflation made easy!
greenwatersports.com/shop/red...
A revolution in pumping technology!
The original Titan Pump has been completely re-imagined and re-engineered. Red Paddle Co have taken the already proven double chamber format and focussed on ease of use and ease of packing. They’ve also improved the fixtures and fittings to make for an even more durable pump.
The Titan 2 Pump is the world’s first purpose-built, double chamber SUP pump. It’s designed to cut the amount of time and effort it takes to inflate your board by half. Constant innovation has led to Red Paddle Co testing the absolute boundaries of inflation technology and as such, they’re confident that there’s nothing quite like the Titan 2 pump on the market. The Dual Cylinder system, combined with the Hi Flo handle means you are in complete control of the energy used to inflate your board. It puts the air into your board faster and reduces the effort required to reach a higher pressure.
The packed size is 2/3rds less than the current Titan pump, which makes rolling the board much easier and results in a tighter rolled board.
Updates and innovations on the Titan 2:
Folding feet and a removable quick release handle reduces the packaged size by 30% compared to the original Titan pump. This makes it much easier to roll and pack your pump and board.
The chamber isolation valve is now an integrated switch rather than a removable plug, which makes it easier to switch to one chamber while pumping.
A double-ended bayonet hose fixture (Halkey-Roberts) reduces leaks and removes damaged screw threads when attaching to the pump.
Our redesigned air box means the pump hose now attaches to the main body to reduce the movement of the hose when inflating.
An increase in volume overall makes for faster inflation.
An integrated pressure gauge helps reduce impact if the pump is dropped.
The standing position has shifted 90 degrees, so you are only astride one chamber.
In addition to having wider feet, the Titan II is more stable and ergonomic, especially for smaller riders/pumpers!
The Titan Pump design concept features two chambers, one larger volume cylinder (low pressure) and one lower volume cylinder (high pressure). Think of it as a combination of the regular Ezee and the Ezee HP side by side. You start with both cylinders pumping huge amounts of air into the board, then at about 10PSI, you move the integrated switch and it pumps through the high pressure side only. At first you’re pumping double the amount of air into the board than usual, and then you can finish it off to high pressure via the single cylinder.
Put simply, we don’t use electric pumps as the Titan Pump gets the board to higher pressures, faster.
Pump Specifications:
Pressure gauge shows to 30PSI
Pump dimensions: 22″ x 5″ x 7″
Pump hose length: 48″
Pump volume of 4.12l using both cylinders
Weight: TBA

[@horiamorariu]

Hi. Can you please show how the hose looks inside? The connecots, I mean, does they have a plastic bridge in the middle? Thanks!

[@GreenWaterSports]

Red hoses do not typically have the inner bridge. Inadvertent deflation when disconnecting the hose is very frustrating and the reason for its removal on Red hoses. That said, it alters the way the gauge works and is read. Gauge is only accurate during down stroke of pump.

[@shanecharley3269]

What's the standard psi for a 2022 10.6 board. Mines arrived now, I'm 10.5 stone

[@GreenWaterSports]

@@shanecharley3269 Suggested pressure is 18-22PSI

[@callisallen9358]

Will it fit irocker

[@GreenWaterSports]

It may. The valve is the same, but the depth to seal might be slightly different. You can work around this my using different sized or multiple o-rings to get a good seal.