Honda Talon High Clearance A Arms, CV Axles, Billet Tie Rods, & 32" Tires

Today we beef up the front suspension on our 2021 Honda Talon. We chose to do Superatv's high clearance a - arms, billet tie rods, chromoly ball joints, 14" system 3 bead locks, 32" tires, and Superatv's heavy duty CV axles. This Talon should be bullet proof in the trails. We are pumped to take it out for a ride!!! Check out the links below!
Parts Used On This Build -
Front Glass Windshield - bit.ly/3nGzayO
Rear Windshield - bit.ly/33TcaVV
Fender Flares - bit.ly/3GKGTDb
Clear Lower Doors - bit.ly/3nGL1N9
Front Bumper - bit.ly/3rxl9o6
6000 LBS Winch - bit.ly/34WnUaM
Winch Cover - bit.ly/3nGb9aQ
Rear Bumper - bit.ly/32g7qt7
Hitch - bit.ly/34UD8wX
Winch Receiver Mount - bit.ly/3fD0XLW
Front Winch Mount - bit.ly/3nGz5ek
Frame Stiffener - bit.ly/3tIllDy
Skid Plate - bit.ly/356JB8h
Aluminum Roof - bit.ly/32kMWj6
High Clearance A-Arms - bit.ly/3GLISHy
Billet Tie Rods - bit.ly/3IlBsLr
Rear Boxed Radius Arms - bit.ly/3tJ1FzE
Rhino 2.0 CV Axle - bit.ly/3FLTJzT
Axle Cage - bit.ly/3fDuIMD
Speaker Mount Bar - bit.ly/32fyFEh
MTX Speaker Kit - bit.ly/3IiPMnZ
MTX Rocker Switch - bit.ly/3fMrshT
Switch Plate - bit.ly/3Ima0NO
Light Bar - bit.ly/3rCFys1
Whip Lights - bit.ly/3GJBLzl
Whip Light Mount - bit.ly/3tIJeLl
Cooler - bit.ly/33KUig1
Bed Enclosure - bit.ly/33wUtf2
32" XT Warrior Tires - bit.ly/3AdvoSm
Turn Signal Kit - bit.ly/3rBjei7
Mirror - bit.ly/3FK14jl
Snorkel - bit.ly/3fC2B0t
Seat Belt Bypass - bit.ly/3nGq3xI
Nerf Bars - bit.ly/3IkI8tj
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
- Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - bit.ly/2EbSIqK
Prime Weld MIG180- bit.ly/2Q44l5V
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage

[@ashleymongiovi4543]

You should talk to the guys from SXS blog KZbin channel🇺🇸 they’ll get you ANYTHING for that talon and they are definitely well versed in turbos and tunes

[@TacticalTinkerer]

For tie rods, Harbor freight makes a tool that works pretty well for most sizes. They also have stainless steel zip ties for the boots.

[@FangOfTruth]

I have found that lubing the threads on any tool they last longer. Also helps tool to work easier. I have used aftermarket scissor jacks dry just like I got it and threads galled and stripped first time I used it. Was used on a Pinto,so it wasn’t too much weight for it.

[@samsgarage1716]

Good job.You make it look easy enough for me to put the a arms on.Your video rock👍.

[@pcbmale]

im ready for the next visdeo doing clutches and transmission, comming soon

[@aw9680]

I know this is a few months old... But I don't recommend the Jackson racing turbo kit. Look at other turbo kit options. You'll be glad you did.

[@jamesmikesell5458]

Man those tiers look hungry

[@CODOutdoors]

That front end looks awesome! Great work 👏 Hope to see ya at Turkey Bay!

[@RedBeardsGarage]

Can't wait!

[@Van_Lex]

Thanks for your videos! Really helpful :) Greets from Germany

[@Jesse_Jessie_James]

Those lift system's are way better to use. Our 4 seater RZR is bad ass. And lucky the step sway's out and easier for Jessie to climb in since she is 5' tall. We always go mudding all the time and we never get soaked or drenched in mud. And i installed a big water tank to spray water on the windshield. I had a company that work's on ATV's and Motorcycles and i had them up graded the whole drive system and performance system and remove the turbo and up grade the motor. I hated the whinning of the turbo each time i step on the gas and left off the gas. And i told Jessie it's gone and i can get them to up grade the motor better without have to use a turbo. Jessie asked me if i have ever had to watch a video of yours to build or fix something. And i said yeah when i had to work on one of our kid's small motor they had. And i watched other videos and that's when i subscribed to ur channel.

[@summitdave8782]

Sweet...Fun times

[@jesseshelby4383]

You had better schedule a doctors appointment right now cause those wheels are SICK! 💪🏼💪🏼💪🏼💪🏼💪🏼

[@tristanmcnabb2741]

The talon is a allsome looking off roader and it looks powerful too allsome work 🌟 from cruzermans inventions 😁🎉👍

[@kyleryellott702]

Good luck with those rhinos….turners are where it’s at🤘🏼 broke plenty of those rhinos

[@tjfast55]

Yeeee turners 🤘

[@donpayne562]

Need to checkout Honda talon turbo adventures. He has a lot of info on the two turbos available.

[@projectgarage4239]

When’s the windrock trip. Love to take the can am and ride with y’all. I know the park very well.

[@Darth_RevRen]

Question about another video. 5 years ago you have a kohler command pro 27 with 25 ponies(HP). I tried looking for an update to that video but I couldn’t find it. I was just wondering if you guys ever put that on anything?

[@henkoosterhof5947]

Some ,,plastics,, may even get stuck when you lubricate them. For example never use oil on teflon.

[@bryduhbikeguy]

Do the steering bump-stops act similar to rubber baby buggy bumpers?

[@ianellithorpe5918]

God bless RBG

[@aw9680]

My dealer never mentioned a special diff oil for my 19 talon. What is the part number for this oil?

[@jmudd5449]

Gorilla axles, are where it's at.

[@johnathongulley1146]

👍👍👍👍👍

[@DjgillyVW]

whene are you going to do an update on the harley cross cart build?

[@RedBeardsGarage]

When I get it back.

[@nati682]

👍👍🇦🇩🇦🇩🇦🇩🖐️

[@michaelchandler1643]

Been watching you for a while and literally watching you use channel locks backwards ends my career with you

[@paulpinto8400]

Hi. Your inbox number is out of order I guess.