Redcat 64 HALO LED Angel Eyes!!

[@Triple6Tactical]

Can you run this with the other redcat lighting kit

[@StraightUpRC]

Good Question - and the answer is YES you can still run the turn signals and rear tail lights from the 64 light kit from Redcat. This custom bucket and LED set up only replaces the head lights which makes that headlight LED strand in the Redcat kit unnecessary, but the rest of the lighting still works as normal on the Redcat LED kit.

[@DannyDHidalgo]

This is incredible!

[@StraightUpRC]

Thanks - it really does add to the realism and look of the RC Redcat 64 lowriders.

[@daviddeibert2788]

I'd like to know what light kit you used. The brand and part number.

[@StraightUpRC]

Sorry for the delay in this response. The light kit used with these can be found here on Amazon. amzn.to/3IAaK1P

[@rockomonful]

Wow!!! Amazing video keep them coming!! 🤙😎

[@itzreece6347]

Very awesome mod with the halo LEDs. The best part is that it was all done nice and clean. Liked & Subbed bro

[@StraightUpRC]

AWESOME! Thanks! It was a fun install. Makes them look very clean!

[@daviddeibert2788]

What light kit and brandy to use?

[@StraightUpRC]

So, the light kit used with these can be found here on Amazon. amzn.to/3IAaK1P It is the same LED set used on my own rigs and in the Redcat 59 install video. KEEP IN MIND - you need 2 sets for the install.

[@daviddeibert2788]

Thank you very much.

[@reginallreynolds9827]

Those are sweet

[@OgKoolaidRC]

How can I make this work if I have a dual front servo set up?

[@StraightUpRC]

If you are running a dual servo set up and 1 servo is plugged into channel 3 and the second servo is plugged into channel 4 - you will not be able to wire the lights up to channel 4. However, the receiver has 3 other ports that you can technically use to POWER the LED strips with. But you will not be able to control the light color with the remote on command. You will have to unplug the lights and re-plug them back in to acheive the color you wish prior to driving. OR you can wire in a receiver wire "on/off" switch and run the switch to a location on the car you can turn on and off the LEDs with and it will let you switch the light color directly even without having to unplug them. It is somewhat of a procss that takes extra steps - but it could be done.

[@johnieleltitandelais]

The best🔥🔥🔥🔥

[@HOTRODKRUGER]

What about back lights

[@StraightUpRC]

The backlights are simple red bullet LEDs. In order to use a light similar to the HALO LED style lights the light "bucket" would have to be modified or "cut up" to fit anything like the front. The smallest "HALO" style LED I have ever personally seen was 8mm - and the hole for the back LEDs is too small. Or someone could simply find a 3mm LED that has a multicolor function. These custom buckets do not modify anything. They simply replace the stock light bucket.

[@thedeathwolf1]

Is there a set of brakets like that for a gen 8 scout 2 I am trying to find a set for my new head lights for my crawler

[@StraightUpRC]

Actually no there is not but that is a VERY good idea! I may have to make some. I never thought about doing that to the Gen8 but no that you bring it up - I just might have to make those as well! Thanks for the idea! Keep an eye out - I just might do that!

[@StraightUpRC]

It has been a while since I have replied - but the Gen8 now has buckets available for HALO LEDs! Check it out: kzbin.info/www/bejne/mYutd4uHatSai7M

[@jaredsayrc4947]

Are you going to make something for the Monte Carlo

[@StraightUpRC]

Sorry for the delay in this response. I wanted to make something for the Monte Carlo - but the problem is the lights are rectangular, and I have yet to find a rectangle HALO style LED anywhere...

[@mleon602]

how much do you charge to install them?

[@StraightUpRC]

So depending on shipping and such, the value of an install can change from 1 install to the next. If you would like me to do the install message me on Facebook or Instagram so we can see if we can make that happen. If you do not have either of those platforms - my email is found on my page "About" tab and you can email me there.

[@mr.graham5592]

How can I get these lights do they wrk for the 59

[@StraightUpRC]

These, sadly do not work for the 59 yet. I am currently trying to design the 59 headlight bucket that supports these LEDs as well. But I have not finished that design. Keep an eye out - I plan to have it done soon.

[@ernestchavez2077]

What did u do to the back tail lights??? Did u add leds

[@StraightUpRC]

I personally did nothing to the taillights. The stock tail lights on the Redcat light system still work in conjunction with the HALO LEDS. All you do is remove the headlight wire from the Redcat LED kit. So - essentially you leave the taillights alone entirely.

[@GOD2GINO4EVER]

Where can I find those custom headlight buckets; thank you???🙏🏿🙏🏿🙏🏿

[@StraightUpRC]

So the headlight buckets are made to order. With that being said if you message me on either my Instagram account or Facebook I can cover the details on that. Those links can be found in the videos description box on the bottom.

[@GOD2GINO4EVER]

@@StraightUpRC hey I just went over to Instagram and I found you; thank you so much young man you are the best🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿👍🏿👊🏿💪🏿✌🏿💯💙

[@BigDude624]

I’m confused on how to keep the lights on one color. After you leaving the switch up the color will stay the same after hopping the front?

[@StraightUpRC]

Yes. If you leave the switch UP on a specific color and use the "front" switch on the side of the remote to use activate the front - the color should stay the same color. If you hit the "button" for the front of the car on the center of the remote - it will change the color again. Or if you lower the switch and go back up - it will change the color as well.

[@redwolfrc1.14]

Great video. So is there a link or website to purchase the headlight buckets . I dont have a 3d printer. Not yet anyways

[@StraightUpRC]

Sorry for the delay in this response. The buckets for the 64, 59, and Gen8 can be found here: www.ebay.com/usr/straightuprc

[@beezieone]

Are you still making these?

[@StraightUpRC]

Absolutely - click the link to my Facebook page in the video description and message me there. I can send you details on where and how to get them.

[@beezieone]

@@StraightUpRC I do not have a Facebook account but I did message you on Instagram

[@StraightUpRC]

@@beezieone That works too! I meant to say "Instagram" as well! Perfect - I will look for the message! Talk soon!

[@Triple6Tactical]

Where can I find the headlight brackets?

[@StraightUpRC]

Message me on my Facebook page and I can send you that info directly! facebook.com/StraightUPRC101

[@lowlowluis]

How can I buy the mounts if I don’t have fb I have instagram and also where do I find the 2 to 1 plug cables

[@StraightUpRC]

Message me on IG and I can send you all the info you should need. instagram.com/straightuprc/

[@XaviG808]

Where can the buckets be purchased?

[@StraightUpRC]

Message me on the Facebook page and I can send you that info directly! facebook.com/StraightUPRC101

[@reginallreynolds9827]

Where can i purchase these lights with the buckets?

[@StraightUpRC]

So the headlight bucket and the LEDs are technically sold separately. I do not sell the lights directly as of yet. And the buckets are made to order. With that being said if you message me on either my Instagram account of Facebook I can cover the details on that. Those links can be found in the videos description box on the bottom. There is also a link for the lights found on Amazon in the video description as well about half way down. Any other questions feel free to let me know.

[@jaredsayrc4947]

It's wouldn't work for the Monte Carlo all channels are filled

[@StraightUpRC]

I was looking into the Monte for something like this but not only are you right - the channels are filled - but also the "HALO" ring light would be useless as the headlights are square anyhow. So I would have to come up with some other form or shape and find a functional LED kit to go along with it. As of now I have no idea if they even make square "outlined" LEDs even close to the right size. So - no plans yet.

[@hollyh2034]

Not rhe same sorry

[@StraightUpRC]

Do you not have the same wiring platform and LEDs as in my video? Did you need help with another wiring kit?