Redheaded stepchild High Performance TPI project, final flows head, intake and different throttle bd

[@juhanahuovinen]

Nice job, interesting how the flow didnt back up after .500 with the manifold. Bigger port made more low end torq? 🤫 -juhana

[@servediocylinderheads]

Yes, even D.V. thought it was strange. I have seen it before where the bigger port gave better low end torque.

[@Mrshotshell]

​@@servediocylinderheads Could possibly be a better port shape that improves cylinder filling more than the decreased velocity lowers it

[@servediocylinderheads]

@@Mrshotshell Could be. It also had a 40cc bigger port.

[@roberthollinshead2325]

really really nice results on the 007 heads Charlie! thanks for sharing this all

[@servediocylinderheads]

@@roberthollinshead2325 Thanks Robert.

[@itseithergonnaworkoritaint7852]

Nice work as always.😎👍

[@servediocylinderheads]

@@itseithergonnaworkoritaint7852 Thanks!

[@jackbooten2681]

Just a comment to tickle the algorythem.

[@servediocylinderheads]

@@jackbooten2681 Thanks

[@dondotterer24]

Alot of great work Charlie. Your customer should be very happy. Hopefully he can do a good job tuning. Will he have to use bigger injectors than stock?

[@servediocylinderheads]

@@dondotterer24 I am sure. He can burn his own chips and I have no doubt about his tuning ability! Thanks

[@dondotterer24]

@@servediocylinderheads That's awesome.

[@servediocylinderheads]

@@dondotterer24 I agree! He said he would video the dyno for us as well!

[@dondotterer24]

@@servediocylinderheads great!

[@robmartin5382]

Still learning on tuning but Brian S and Jim Hall have both offered help. She shall be tuned like a champ and yes, I will do a complete video for the dyno. 👍

[@joelmclaughlin2558]

Nice work, Charly! On another topic, is it necessary to install valve seats on a Ford E7TE when installing the next larger valve size ( 1.84, 1.54), or will it last if you just open up the existing as is?

[@servediocylinderheads]

@@joelmclaughlin2558 cut right on the iron. Good guides will prevent recession.

[@joelmclaughlin2558]

​@@servediocylinderheads Thanks for responding!

[@Madmax.3]

That Throttle body looks like its a 58mm not 52

[@servediocylinderheads]

@@Madmax.3 You may be right. I will check

[@servediocylinderheads]

You are correct 58mm!

[@servediocylinderheads]

Thanks!

[@Madmax.3]

@@servediocylinderheads yes the divider on the 52 would be much wider it was hard to tell bc you ported it but i had a feeling it was a 58mm. that 58 ported the way you did will flow more than a as bought 58mm and that makes the 48mm numbers even more impressive no need for bigger throttle bodies best to put those funds to heads cam intake or exhaust

[@servediocylinderheads]

@@Madmax.3 Good info. Thanks!