REDWALL ! REDWALL ! Garage Tool Organization (

#milwaukeetools #PACKOUT #organazation
My Amazon Store Front, Here a a few collections for products we use for 3D Printing, Tools or just Electronics .
www.amazon.com/shop/jakeofall
Amazon Links:
Horizontal E-Track
amzn.to/3uPAj9m
Vertical E-Track
amzn.to/3uNb1ZC
PACKOUT Shelf Kit from Ohio Power tool:
shrsl.com/36z1w
PACKOUT only from Ohio Power tool:
shrsl.com/36z23
Click here to get a PACKOUT Bracket for your M18 fan: www.3dtechnologiesusa.com/pro...
Click here to get the Bitstacker bins for your PACKOUT drawers:
dennissmallboneprints.com/pro...
For the steel PACKOUT Style plates go here (Tell them JakeOfALL sent you)
/ rdr_cnc
CNC Aluminum PACKOUT cleats:
unbeatenpathdesigns.com/
Go here for BLACK PACKOUTS ( Tell them JakeOfALL sent you)
/ adzysgoods
Head over to @thejakeofall on IG
Check out the Kaizen Foam @
kaizeninserts.com/
One of the best designers of 3D Printed Tools
workshop.electronsmith.com/
Let's be SOCIAL!
JakeOfAll on Facebook: / thejakeofall
Our Garrett Farms on Facebook: / thegarrettfarms
Instagram: / thejakeofall
Twitter: / jake0fall
My Ohio Power Tool Affiliate link shareasale.com/r.cfm?b=123230...

[@patrickreilly2283]

After owning at least 13 of these packouts for 5 years and watching these videos all the time I've realized the real goal of these things is for us contractors to clear up floor space and to go to home depot less often because our inventory and organization has expanded dramatically

[@JakeOfALL]

100 Percent!

[@praetorianstride5948]

Maybe not a goal of, but a consequence of more well prepared behavior. Less gas waste too. But the drive can be good for some.

[@weedydgaf7546]

Love when people say "for OCD reasons" you dont have ocd because you wouldnt have left that plywood line on your roof uneven. Your picky but you are not ocd

[@JakeOfALL]

Right, except I look at it all the time ... even though I plan on adding trim, I know about it ..

[@semirramic9338]

I agree weedygaf

[@garycasper2929]

@@JakeOfALLso, basically you’re a procrastinating OCD’er… Lol..! 🤘

[@Whiskey.Tango.Actual]

Psychiatrist here...love it when people's whole personality is "iM oCD" and their comment demonstrates they don't understand what OCD is as defined by the DSM5...😂

[@MegaDadof6]

Can’t wait to get back in the packout system. Great video as always.

[@JakeOfALL]

Thanks 🙏

[@ktm250xcw]

A shame you don’t have a bigger garage. Can only imagine the amount of new ideas and content more space would get you/us. Well done!

[@alandohse1977]

Great looking setup! I don't have nearly the number of Packout you do, but I can take from your video what I need. I also like the cabinet for the metal lathe! Thanks for sharing.

[@dolrr54]

Nice job Jake. Now I'm inspired to do the same type of installation. Thanks buddy!😁👍

[@JakeOfALL]

Thanks! It was so worth it !

[@atamagashock]

Looks amazing and after seeing this, I’m going to take out my old metal shelving in my work van and convert the drivers side wall like you have here

[@JakeOfALL]

Awesome!!! And thanks

[@1stFlyingeagle]

And you now are hook line and sinker F****ed. Space wasting overpriced plastic.

[@taurean214]

Absolutely Amazing !!!! Feels Good to be Organized !!

[@JakeOfALL]

Ohhh yes it does ! It makes projects so much easier

[@maverickciao]

The black wall really brings out the red. Looks very good 👍

[@JakeOfALL]

Thanks

[@billy1266]

Awesome job!! You just inspired me to redo my storage room and organize my Packouts. 👍

[@JakeOfALL]

Thanks and good luck

[@ksichelstiel]

Packout wall looks great, nice job!

[@JakeOfALL]

Thanks so much

[@kevincoughlin1023]

Jake thanks all your hard work. You are giving me great ideas for my shop. Your place looks great!

[@JakeOfALL]

Thanks for the kind words

[@Sparkeycarp]

Awesome job on the Red and Black wall. One thing I might mention as an electrician. The plywood should not be exposed to the inside of your electrical panel. Same for your outlet. You can buy a cabinet insert that is plastic for the outlet. For the electrical panel you can either cut back the plywood to the outer edge of the deadfront or maybe frame around the plywood edge with some drywall metal end cap.

[@JakeOfALL]

Yeah I did put plastic extensions in the outlets but I think i will just replace the sub panel

[@gastricsleevechannel231]

Woooow ! I love your garage ! My Friend much respect to you! the best packout set up Ive seen! Shout out from Tijuana, Mexico! Im your fan!

[@JakeOfALL]

Thanks so much ! how's the weather ?

[@bamslife2812]

Impressive sir! Goal worthy organization

[@JakeOfALL]

Thanks

[@dudesgarage3189]

Dude it came out sooooo freaking awesome 😎

[@JakeOfALL]

Thanks, it was a ton of work but I am happy with it

[@davek6630]

Nice job! Very well organized!

[@JakeOfALL]

Thanks

[@PowerToolsForBeginners]

This is Fantastic! Love the set up!

[@JakeOfALL]

Thanks so much

[@MilwaukeeToolAddict]

That turned out awesome.

[@JakeOfALL]

Thanks so much

[@travisjohn5719]

What is so funny is I am pretty die hard Milwaukee as well and I have the same Dewalt tape measure. I actually thought about sending Milwaukee an email today with pictures of the pile of broken Milwaukee tape measures from the last few years.

[@kevinmoore3248]

Great job Jake! I am currently building a complete pack out electrical service van. Using some of your products.

[@JakeOfALL]

Thanks so much

[@Flyingfrogs2y]

👍HELL YEAH!! I’m a electrician as well and I would love to see your layout Kevin. I use Versastack in my Chevy Express. Share it when you get it done brother 🤘

[@kkutube1972]

Your garage is awesome, it must be fully fortified!!!!!

[@JakeOfALL]

Lots of kids with rabies

[@davidanderson6385]

Looks great Jake!

[@JakeOfALL]

Thanks so much

[@chrishensley1834]

That the best wall I've seen yet

[@JakeOfALL]

Thanks

[@terrytuell3361]

Got the black!! Looks good!

[@JakeOfALL]

Thanks

[@someguy8523]

The wall looks awesome great job

[@JakeOfALL]

Thank you so much

[@paedahe4975]

Yah, it’s pretty nice. 👍

[@gonzafleitas]

Everything is great, here in Argentina it is very expensive to buy the Milwaukee packout, hopefully one day we will reach that level of equipment. greetings from Argentina 🇦🇷🇦🇷

[@anthony5530]

Nice Lego collection

[@JakeOfALL]

Lol

[@Element9846]

That garage door edit was dope!

[@lazfineztisnthebuildin7279]

Dam a lot of machine tools sheesh 🤯🤯🤯

[@DjBunnyPro]

need a wall like this great job!!

[@JakeOfALL]

Thanks!

[@mattbjorklund4930]

nice. love the backpack vac

[@JakeOfALL]

One of the best vacs!

[@coldwe]

Dang man I’m so jealous. I love this.

[@JakeOfALL]

Thanks

[@Derek-e]

Looking good 👍

[@JakeOfALL]

Thanks

[@stevenperry4941]

P.S. jealous as all get out. Now I just need a garage!

[@JakeOfALL]

Thanks ... it was a ton of work

[@dannu56]

Nice 👍, I like this set up.

[@JakeOfALL]

Thanks

[@briannisbet3982]

Nice work

[@JakeOfALL]

Thanks so much

[@banga8080]

Looks like a store display Milwaukee should come to your house to take pics for advertising 😂😂😂😂😂

[@JakeOfALL]

Hahah I wish

[@prestigemechanical3600]

The packout shelf should feature drawer slides that lock and unlock like a tool box on the far right side and have a slow close when shutting drawer. Working on one right now.

[@JakeOfALL]

that would be awesome

[@alanhill5513]

Sort of like the Snap On truck display shelf’s?

[@appleforever6664]

Couple of grand of plastic boxes. Wow!

[@isidorodelapaz8207]

Nice!

[@JakeOfALL]

Thanks!

[@Netty7787]

Very nice

[@ChrisGP1027]

Impresionantemente bien organizado y a la vista excelentemente hermoso 👍

[@JakeOfALL]

Ok

[@williamfrench9973]

And I thought I had P.A.S. (Packout addiction syndrome) 😂. I am so jealous. I did a little quick math and I think that’s just under $6k in packout on that one wall. Really nice setup!

[@zman8340]

When regular shelves just aren’t gucci enough

[@-clif1987]

He spent in pack-out close to what I have in tools. Crazy.

[@DanKlein_1]

stay cool. Looks like my garage. Not really. mine is a mess. nice work.

[@JakeOfALL]

It was so bad !!! And thanks so much

[@jamityson1943]

Lol you have a packout problem sir! Nice setup 🔥

[@JakeOfALL]

Yeah a small one! …. Thanks

[@Erik-ie3xz]

Great organization...but I'd add a small counter top, chair, TV spot

[@JakeOfALL]

Thanks and that’s for PACKOUT wall 2.0

[@b-gill9224]

Is it crazy to be a DIYer obsessed with packouts for home organization?

[@fredericho1104]

What kind of screws did you use to screw the pack to the pluwood

[@chrislewis2262]

Now what is the maximum weight limit per shell as well as the maximum weight for the horizontal and vertical rails? Cuz a lot of my pack out units usually have quite a bit of weight to them specially when it's filled with screw, nut/bolt and washer hardware. I wouldn't want to have it rip from the wall studs or have the tracks twist up on me over time.

[@joeindustry]

You obviously need a bigger wall. Yes I’m jealous.

[@JakeOfALL]

I know! Right !

[@garthmalena395]

About to go this route in e350 and shop

[@JakeOfALL]

Nice

[@michaelsmirnov1469]

And I thought I was red!!😀🤭❤

[@JakeOfALL]

hahahahha

[@peachypound6108]

Do not go on vacation, you’ll make one Happy thief extremely Happy! 😂

[@JakeOfALL]

Nope ! lol

[@Tigerratcat]

Sick setup. Any tips on acquiring a packout drawer garage system more cost effectively?

[@JakeOfALL]

Wait till Black Friday

[@JohnnyUmphress]

All I can say is, wow! I am trying to come up with an idea to label the front of Packout boxes. There just isn't enough space for lable tape. And I want it straight and uniform. Any ideas, anyone?

[@JakeOfALL]

Decked out has latches that have labels

[@jamesnewsom5899]

I used my electricians label maker and found that labels with large type fit perfectly on the larger packout pieces. Haven't looked hard at the small parts bins because I have them stored flat on the walls of my tool trailer

[@dwaynehiebert1127]

Where did you find the e-Track shelf supports?

[@stevenr8353]

@Jakeofall What label maker do you use the sticks well the plastic pack out boxes?

[@JakeOfALL]

The p touch 550w

[@paulmcwilliams9998]

I've a lot of stuff but you have much more.i have a sweet job and a buissness don't know if still I could afford all that lol

[@JakeOfALL]

Well it's my retirement, LOL

[@mikeraths5562]

Cool

[@JakeOfALL]

Thanks

[@joshandicoechea6770]

I seen some senco stuff there and jet, my man!!!

[@JakeOfALL]

Hell yeah!

[@steveazevedo8966]

Dang, bro even has a packout F150!

[@kryburn251890]

What web site did you get your laser bracket from? Thats a must for my light.

[@JakeOfALL]

Look up rdcnc on IG

[@got2getit204]

I love your set up however it looks like it’s just the same thing stacked on top bland if you ask me I think you need to integrate the the wall packout system in the middle add some flavor but before you say I’m tripping mix it up because My wall is versatile but go red!

[@JakeOfALL]

Thanks for the tip

[@dancin4]

Wow how many packout drawers and storage bins do you own? How much would it all cost?

[@TaylorMcDonaldMusic]

Have you noticed any issues with mounting the racking shelves on horizontal E Track vs the recommended vertical layout?

[@JakeOfALL]

I have not had any at all

[@RJCHomeServicesLLC]

where do you purchase the silver looking brackets that clipped into the horizontal and vertical racking that slid into Packout bases? I got the links you posted for the rachking, just curious where you got the silver brackets that clipped into the racking....? can you post a link to that or am I missing it?

[@JakeOfALL]

Those are the Milwaukee wall mount brackets.

[@williamjones3603]

I do like your content though. Good stuff. I think having cabinet doors would give you a space to advertise. You could stencil on the Milwaukee name and stencil some cool art also.

[@JakeOfALL]

Hummmm

[@scarecrow1490]

Milwaukee thanks you.

[@JakeOfALL]

Hahahahhahaha

[@scarecrow1490]

@@JakeOfALL with that being said, I'm looking in to building a wall of my own. Nice work.

[@JakeOfALL]

@@scarecrow1490 hell yeah! And thanks

[@trevorpalmer1891]

Lucky Man!

[@JakeOfALL]

well yeah

[@WILSON0o6]

Hey, I purchase some items off your website 2 weeks or so ago. How can I contact you for shipping details? Thanks

[@JakeOfALL]

Can you email me at [e-mail]

[@TheDeal4412]

Home Depot employee...."which packout case do you want?". Customer: "all of them".

[@acstanton43]

What packout would I need to add on top or below the packout light to make the top flush with the ammo can?

[@JakeOfALL]

1 standard profile or 2 low

[@acstanton43]

@@JakeOfALL thanks!

[@leftyz707]

Kick ass wall bro. Just watched this one. I can relate to you so well with the wife's amd packout stuff lol. Also the brumt work boots. U kick ass bro. Have a good one

[@JakeOfALL]

Thanks a ton

[@tedmcdonald3377]

Did you ever figure out the half size shelf 🤔🤔🤔

[@vincentlawrence677]

Great video and great install job. But why would anyone need THAT many toolboxes????

[@JakeOfALL]

Thanks so much. And … I love adult Legos

[@frangeech]

In the year 2021 all that 1/2" plywood probably cost just as much as all that PackOut gear! What a time.... lol

[@JakeOfALL]

OMG yeah! I have had to delay the project for $$ reasons lol

[@Jeffs40K]

Do you haul your tools around enough to need it all Packable, a Normal Counter Cabinet on the bottom ad even Uppers would took and Cost less, I do like Pack out but that's a MINT $$ in storage solution.

[@JakeOfALL]

Yeah I guess it’s not needed

[@danielshaw4692]

You need to swap the tape measure around, the DeWalt looks out of place, keep that in the drawer and the Milwaukee on display!

[@JakeOfALL]

Hahahaha but the Milwaukee one is clean ! Lol

I was wondering why people don’t use more e-Tracks on their garage, right? So many more accessories

[@JakeOfALL]

Yeah it’s so versatile

[@williamjones3603]

You want everyone to see what you have when you’re garage is open. Wouldn’t a cabinet with doors bee a better option and would look less messy??

[@JakeOfALL]

I guess but I like it .

[@ronmurphy4234]

So why would anyone use the horizontal version when the same shelf is required? Also have you thought putting all your commonly used tools into a single Packout box using foam, and then hang that box on the wall using the standard Packout hanger?

[@seankennedy9163]

In my utility trailer the etrack on the wall secures the cargo I put in there. I could use a packout shelf at any place along the wall and still be able to secure cargo. Otherwise I would need to buy a lot more vertical etrack and space them accordingly. Depends on what you already have and what your needs are….

[@GregoryCain94]

Gd u no how much money $$$$$$ is on that gd wall lmao that’s my dream set up hell yea keep killing it bro

[@JakeOfALL]

Toooo much lol

[@justinrogers1988]

What size are the holes/slots in the tracks? If they’re at least 3/16” or 1/4”, I would use Snap Toggles to mount those, as the 1/4” Snap Toggles support up to 265 lbs. of weight per bolt in 1/2” drywall. So even if you were to only use 2 Snap Toggles to mount the top portion of the track (where all the pull occurs), it would still support over 500 lbs. of pull. 4 bolts = over 1,000 lbs. 6 bolts = 1,500+ lbs. 8 bolts = 2,000+ lbs. We use those all the time in my line of work to mount full sheets of fire-rated plywood to drywall, as well as heavy metal network racks to hold network switches, firewalls, sound system equipment, amplifiers, security system equipment, NVRs, etc. I usually even do a “hang test” once I’m done installing a rack, to make sure it will hold my 180-200 lb. self lol! I’ve been mounting extremely heavy stuff in walls for 10+ years now, and I haven’t found anything better than those Snap Toggles. They’re quick, strong, and even reusable, unlike toggle bolts. 100-Pack Assorted Length 1/4-in dia Toggle Bolt Drywall Anchor (Screws Included) www.lowes.com/pd/TOGGLER-100-Pack-Assorted-Length-x-1-4-in-Dia-Toggle-Bolt-Drywall-Anchor-Screws-Included/1000133661

[@justinrogers1988]

I forgot to mention, if the slots/holes are only ~3/16”, I would break out the step bit and drill it out to a 1/4” hole, so you can use the beefier 1/4” Snap Toggle bolts, which hold more weight than the 3/16” bolts.

[@justinrogers1988]

Great job on the wall! It looks great, I’m sure everyone’s happier that your garage is more organized and looks and feels less cluttered!

[@JakeOfALL]

I love the snap toggles for TVs where one side needs support or closet systems !

[@greatdaneacdc]

While She!.... Lots of respect for his Partner! Or was he talking to the Dog🐶

[@JakeOfALL]

hahah

[@jasonmaschke2454]

Where do you sell your items

[@JakeOfALL]

Shop.JakeOfALL.com

[@LoPezdope]

All that money on packouts forgot to buy a light switch . .

[@JakeOfALL]

Damn it

[@jeffbloomquist7925]

I can hear a lot of people driving by during this video man, make sure you have a wifi camera system inside there. That red wall is a beacon for theifs. Good job tho man.

[@JakeOfALL]

Many cams !

[@MyGuyKirby]

All looks great but you really need a covered spot to protect those vehicles from the Florida sunshine and storms

[@JakeOfALL]

The #Packtor was never going to fit

[@MyGuyKirby]

@@JakeOfALL That is so true of many homes these days. But as you expand or build an enlarged shop at least make covered parking into the design. Love your #Packtor!

[@JakeOfALL]

@@MyGuyKirby ohh yeah ! Part of the reason I bought a house on two lots ! Needed room to add a shop

[@aprilcruz6774]

wow

[@jasonmaschke2454]

Do you 3d print a bin for the 5000 staple box

[@JakeOfALL]

Wait what ?

[@jasonmaschke2454]

@@JakeOfALL A bin that would hold a big box of staples so they don't break apart

[@jamnben278]

Bring the lady back, she's cute!

[@JakeOfALL]

Hahaha

[@serg4220]

Can you do a microwave packout mount. To see if there any way to have one

[@JakeOfALL]

Omg SMH lol

[@serg4220]

@@JakeOfALL for the jobsites 😅

[@JakeOfALL]

@@serg4220 hahaha

[@johnwagner5514]

Guys. Milwaukee sent that stuff to him.

[@Drummerboy67]

Yes, it looks great. And yes, it looks awesome but in all seriousness, how much do you really really need? This is overboard.🤣

[@anthonyrochon3907]

The battery holders and other storage compatible with Dewalt tools? Milwaukee system is so far ahead of aanyone else. Wondering if Dewalt guys, use Milwaukee storage system?

[@chrishensley1834]

Where did you find the black packout kit

[@JakeOfALL]

Mine was Amazon but another guy and the link is in the description has them adzygoods is his name check out the link

[@chrishensley1834]

@@JakeOfALL thanks for the info

[@terrytuell3361]

Where did you order the black packout through?

[@JakeOfALL]

adzysgoods.com/ use code ADZY10JAKEOFALL

[@TheAlphaWolfMan]

How much money do you have there in Milwaukee storage?

[@JakeOfALL]

humm, I need to get out the calculator !

[@ocappyman2572]

AWESOME setup!!! Did you buy all of that or did Milwaukee donate it for advertisement? It all looks brand new. Just curious

[@JakeOfALL]

I paid for aAll but two half PACKOUTs and the backpack . I like to keep my stuff clean

[@iglopez63D]

Why the ply wood against the wall? Better support and anchoring?

[@JakeOfALL]

Yeah, I anchor the plywood to the studs and then I can put the screws anywhere for the track onto the plywood

[@benwynkoop1]

Do you screw boards like 2 x 4s to the wall (where the studs are) and mount the plywood onto these boards or plywood directly onto the wall?