Reefs RC 800IS Winch GRUELING on vehicle test!!

This thing is awesome!!! Get one here before they get gone! www.reefsrc.com/shop/p_225701...
High Torque High Speed
Brushless Servo Winch
SUBMARINE WATERPROOF: 6 Point Seals
Internal Machined Spool w/ Coated Finish
Approx 6ft .8mm Synthetic Line w/ Scale Recovery Hook
Voltage 4.8V - 8.4V
CNC Aluminum Casing
Internal: Steel Gears
Bearing Type: 3 Ball Bearings / Weight: 2.3oz
Dimension: 1.6 x .79 x 1.16 (LWH)
Torque: 800oz @ 6v/ 848oz @7.4v/ 960oz @8.4v
Speed: .08sec @6v/.07sec @7.4v/.06sec @8.4v
Dead Band Width: 2¦Ìs
BEC Not Req.
Links below for stuff on the TRX4 Sportish and more, they help out the channel when you use them, thank you!
Traxxas TRX4 Sport
Amain bit.ly/3xQoBwl
Amazon amzn.to/2QZrsCA
Ebay ebay.us/D0BnPq
Reefs RC 422hd V2 Servo
Amain bit.ly/2SBzsdD
Ebay ebay.us/fsRL0o
Hobbywing AXE R2 2100kv
Amain bit.ly/3h8ylw8
Amazon amzn.to/2RrrnaF
Ebay ebay.us/1an22n
Cheap 1.9 alloy beadlocks
Amazon amzn.to/3epUl3P
Ebay ebay.us/GSUSgD
RC4wd Baja Pro X
Ebay ebay.us/xVga7M
Bonus clip
Some awesome TRX Bashing here: • Extra Trx Bash
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

[@onthreevideos1096]

Anyone else notice the lizard when he first went to " Hook it "??? Lol

[@DoubleADay]

It looked like a baby one

[@JoeOvercoat]

“BEAM ME UP, SCOTTY!”

[@old-rcplane-phart]

U may wanna try some 200lb spider wire as the winch line. I couldn't even fray that stuff! ($10/50 yards)

[@marcharry6634]

you probably dont give a shit but if you're bored like me during the covid times then you can stream all of the latest movies and series on InstaFlixxer. Been watching with my brother for the last few months :)

[@gatlinarturo1102]

@Marc Harry Yup, I've been using InstaFlixxer for years myself :)

[@DoubleADay]

I haven't used it yet on a trail but I installed a rc4wd 8274 on my trx4. It has amazing torque and good line capacity

[@Tacklefinlures]

I was glued to the action. Great video brother! What a beating! 💯

[@jdsrcs8061]

That is insane!!! I was waiting for the winch mount to rip off!!! I have been a few off road runs and have seen a winch or 2 rip off the mount or complete bumper!!!🤘🤘🤘

[@reggaejunkie8642]

Amazing speed and power! I love REEFS RC products

[@Art-zs6sl]

NOT clickbait. That was grueling! I definetely want one of those for my TRX.

[@RC4all]

Wow impressive, great testing 👍🏼

[@rc-daily]

I was actually expecting it to rip the mount off or rip the winch out of the mount! What a beast of a winch! I just use the little rc4wd winches. They work ok. They're not for competitions or anything like these guys are.

[@extremercbashers9975]

I just put a reefs 422 HD Servo winch in my gen8 last night it's a Beast

[@fernsolo]

Impressive 👍

[@old-rcplane-phart]

#1👍👋

[@daysdesigns]

Ol cliffhanger! #2

[@rezzrollinrc]

I dnt use a winch but nice mr Exo✊🏽

[@gonncalomariamonteiro4176]

If this was grueling, can't even imagine it with CREEP6

[@hyperlogos]

I put a super cheap china winch on my gen8 v2 and it came with a steel line. lost a couple screws though, you gotta loctite every screw because they don't

[@jonthomas8487]

I just don’t understand the draw of crazy power winches that are over $100. I know I justify expensive steering servos (I use a 777), but for winches when a Micro99, 3Bros Overland or Boom Muscle will all do the same for under $70 why spend $150? I think speed is the real thing here especially when you lifted a stock TRX6 with the Micro99 😀

[@KingElfin]

Grueling test for a new winch. But it passed with room to spare. It has the whole 800oz of torque at 6.0v also, Torque: 800oz @ 6v/ 848oz @7.4v/ 960oz @8.4v.

[@brettwallick4885]

This is the winch I need for my assender

[@scheers100]

Great use and abuse test!

[@josephwimerYoYoYo]

YAY!

[@cre8rcferfig57]

Joe I think you should get a Jrzydevil land anchor, the best one on the market

[@JoeOvercoat]

Got a link for that?

[@rc-daily]

And theres literally no other crawler I would have done this test with. That winch would have pulled an scx10.2 in half.

[@josephwimerYoYoYo]

Yo Exo! Have you played around with servo winching the front suspension? A dynamic version of your hairband travel limiters! Just curious, as I've seen winches used to do this on full size rock crawlers. (suckdown winch.)

[@frankiemelton3428]

Can you put the proline black mamba tires on the trx 4 sport

[@ifs_ryft5073]

I have already tore my ryft apart the rear diff is skipping extremely bad, the shock is sticking really bad, I def wouldn’t recommend it. I’m currently trying to shim the diff to see if that helps

[@ddavidson0404]

How did you tie off the line at the winch after going threw the little hole?

[@alfredosaugus705]

can I use a 3 pos switch from a rtr remote? I want to use this as a winch for my scx24 c10 tow-truck build. perfect to sit on top of the bed. then have a crane built on top of it. what do you think?

[@shannonlaird6152]

Hey Joe I was wondering if you could tell me how to get that 3-D printed mount for this servo I'm gonna put it in the tracks's overload the traxas ultimate tow truck. I'm a veteran tocha driver a long time RC fan of yours and follower I really like this tow truck. I just can't find a mount for it anywhere so I'm confused on how to mount it if they don't even make one so I was wondering how to get your 3-D printed 1? I do not have a printer so I would have to buy it from you or somebody. Thanks and have a wonderful day. And hello from beautiful Colorado

[@damonmuse6567]

I noticed on both my IS300 and IS800 that one direction spools faster than the other.. is there a particular way as per to which one is for in or out?

[@tenncutt]

She's a strong wench... Good video!

[@mickd8188]

You should have used a Reef knot....🤣

[@ExocagedRC]

LoL I did a triple Lindsey knot and got it to hold.

[@sprather84]

@@ExocagedRC isn't that Rodney Dangerfields dive from back to school 🤔 😳 😂🤣😂

[@Hardlines_FullsendRc]

So how do I order Vitavon stuff through you??

[@Andy_C_aka_Cliff_McCrawl]

If you can't tie a knot, tie a lot! @7:44 lol

[@jr1985ii1]

Hey @Exocaged RC. If you were going to put a reefs on the XMaxx which one would you pick???

[@sprather84]

Raw 500 FTW

[@jr1985ii1]

@@sprather84 Thanks, I actually have it in my cart already but I wasn’t sure if it would do the job. I originally ordered a large scale spektrum servo not realizing the one in the XMaxx doesn’t mount like a normal servo. I’ve seen videos of how to fit one into the XMaxx but I don’t wanna hack into the chassis or move the receiver box.

[@darrelledwards1213]

Where you located

[@caveman8200]

Any help is appreciated I have a stock trx4 wanting to put a 3slot 10t motor in It how fast would it go

[@sprather84]

To fast

[@sprather84]

Maybe a 5slot 10t for crawling but not a 3 slot

[@caveman8200]

@@sprather84 why not a 3slot? I'm trying to be as fast as my brothers trx4 he has the mamba x 3800kv setup

[@6Demon6Face6]

Where'd you get the winch mount from?

[@1motorvids]

It was 3d printed

[@Aderas82]

What servo mount plate is that?

[@ExocagedRC]

check out DSM Offroad

[@KTMcaptain]

These are approaching the cost of a real vehicle winch.