REEFS RC PROGRAMMER

[@_alienx_p]

Are the specs on website at 100% power or the percentage set from factory?

[@reefsrc]

Like we said percentage set from the factory.

[@_alienx_p]

@@reefsrc I mean like is a 1100 at 8.4 from factory 1100 ounces at 80%? So I can program to 100% and get more than 1100 ounces?

[@reefsrc]

Yes, I do not know the factory power settings at the moment. But if it is less than 100% you could make that adjustment.

[@jonlaw3642]

Can you use it more than once and on different servos with the same tuner

[@reefsrc]

Yes it can be used on all of our smart servos.

[@IN10THRC]

Howdy! Possibly dumb question while waiting for my USB link to show up in my mailbox. I want to adjust the servo neutral position, which I can do with the programmer. However... can I do it "live" or do I have to guess, flash it, plug it back into the truck, check it, reconnect to the programmer, adjust, reconnect to the truck, see if it's right this time, etc.. ? I'm really liking the idea of the anti burn-out feature while I have the damned thing wedged against a rock shelf... lol Thanks for your time!

[@reefsrc]

it will not adjust live. so the long process you posted LOL. Yeah the dampening feature is great. hope you guess right the first time. you got this!!

[@IN10THRC]

@reefsrc Eh, fair enough. I don't MIND doing it the hard way- I would just hate to do it the hard way and find out later that I didn't need to. Thank you.

[@IN10THRC]

@reefsrc Programmer showed up today. Took me a couple tries to get it close enough to where I wanted it, but overall good experience. Only bummer was it seems you can only adjust neutral position in increments of 3 so I couldn't get it bang on, but... the net result was a lot less subtrim than I needed before.

[@trumanbritt6738]

Using this video to setup my reefs 179 . Success read parameters message displayed. Trying to adjust servo neutral position but no response from servo! How do I remedy this. I can hear ur steering adjusting in this video as you use the slider. I got nothing.

[@reefsrc]

You set the position the write it then hook it up to your truck. You can’t adjust on the fly. Way easier on the remote for that feature.

[@Cranklotus]

Can i run the raw 800 which draws 6.8amps on 7.4v of power with a bec that outputs 6 amps? Or do i need to keep the servo on 6v that draws 6 amps?

[@reefsrc]

You can run the 800lp up to 8.4v. If your BEC only goes up to 7.4v that will work as well.

[@Cranklotus]

@@reefsrc what about amps? My bec puts out 6 amps.

[@jonlaw3642]

Does this work with a iPad Pro or am I going to have to go buy a computer?

[@reefsrc]

you will need a PC.

[@RABBITT11859]

Is this gonna be available for a Mac?

[@reefsrc]

Just windows for now.