No video

Reinstalling the Transmission and Working on Shifting | Farmall 856 Restoration Episode 8

  Рет қаралды 115,990

Just a Few Acres Farm

Just a Few Acres Farm

Күн бұрын

It's time to mate the transmission back up to the rear end of the tractor, and finish the gears and seals in the front of the bell housing. Afterwards, I install new detent plates in the transmission covers to help tighten up the shifting.
For Farm / Channel merchandise: farmfocused.co...
-We do not offer farm tours or accept visitors
-We do not sell from the farm
-We do not ship our farm's products
-We do not sell live animals
To order Pete's book; "A Year and a Day on Just a Few Acres:" www.amazon.com...

Пікірлер: 385
@kevinkoepke8311
@kevinkoepke8311 6 ай бұрын
As my dad used to say, "No need to start a job, unless you're going to do it right." Your attention to detail is remarkable. Thanks Pete!
@johncourtneidge
@johncourtneidge 6 ай бұрын
Mine too! "If a job's worth doing, it's worth doing right." He was RAF WWII Ground Crew in India. Istill miss him.
@mr.science9750
@mr.science9750 6 ай бұрын
What a great way to start a morning - a new "Just a Few Acres Farm" video and coffee!
@Oldfarmersgarage
@Oldfarmersgarage 6 ай бұрын
Agreed! I’m eating some ramen getting ready to go rabbit hunting
@nolehopkins1077
@nolehopkins1077 6 ай бұрын
Got my coffee as well. And a good video.. . Good start to a Sunday
@beckyrobinson5672
@beckyrobinson5672 6 ай бұрын
Thanks again for video. I really enjoyed watching it. God bless.
@jakefrechette3224
@jakefrechette3224 6 ай бұрын
Between you and your Pop, no restoration roadblock stands a chance! Dynamic Duo!
@prestonmiller9552
@prestonmiller9552 6 ай бұрын
Pete, you continually amaze me at your knowledge and ability to restore tractors. Well done.
@samvalentine3206
@samvalentine3206 6 ай бұрын
And to instruct us, the viewers, on how the various parts interact and their function. It's one thing to do something. It's another to explain it well enough so that others see the logic and function of those assemblies being restored/repaired.
@jefferywright4204
@jefferywright4204 6 ай бұрын
Pete - Kudos to your dad for his work to restore the shifting fork! Your dad has a lot to teach all of us.
@josephmay8837
@josephmay8837 6 ай бұрын
Pete's dad did a great job on the shifter fork repair. The welding and finish machining looked great.
@markflick1641
@markflick1641 6 ай бұрын
Your a natural educator . Wonderful to watch you make it right . I love your farm videos but this restoration is amazing . Thank you Pete for taking us along .God Bless
@ryanboldt7751
@ryanboldt7751 Ай бұрын
You are a little like the Mr. Rodgers of Farming and it's great! Very calm and composed! "Tomorrow, tomorrow, we'll start the day tomorrow...."
@buckeyeranger6438
@buckeyeranger6438 6 ай бұрын
🥓🍳☕️ & watching Pete put the puzzle back together 😎
@sburwell75
@sburwell75 6 ай бұрын
I am really enjoying this restoration series. I marvel at the intricacies of this tractor.
@LauraDittman
@LauraDittman 6 ай бұрын
Good afternoon, Pete. You amaze me by having all your parts in order- My father would be proud of me watching your restoration, Farmall 856, instead of the "crap" on TV
@user-gv5wy9yr7n
@user-gv5wy9yr7n 2 ай бұрын
Pete it joys my heart to see a happy man , money isn’t everything ever time ,you r a very intelligent man living life at its fullest great example for us all . Really enjoying your vidios . Kingfish from Tenn .
@KenC49
@KenC49 6 ай бұрын
A tractor is like a box of chocolates, you never know what your gonna have to do more of. Lol. Love your videos Pete!
@herbhouston5378
@herbhouston5378 5 ай бұрын
Thanks Pete. This was very, very, interesting! I'm amazed at the engineering that went into designing this, at that time in in our history. To me it's remarkable!!
@MichaelAllanTorrey
@MichaelAllanTorrey 6 ай бұрын
Patience, Patience, and more Patience. The best tool in your kit. 🇺🇸
@FarmallFanatic
@FarmallFanatic 6 ай бұрын
I'm gonna pass out when you first operate this dream machine.
@JustaFewAcresFarm
@JustaFewAcresFarm 6 ай бұрын
Lol, can you get that on video please?
@FarmallFanatic
@FarmallFanatic 6 ай бұрын
@JustaFewAcresFarm 15 second short 🤣
@matteolaborg
@matteolaborg 6 ай бұрын
I like how Pete talks to the parts he's fitting together. It kind of makes sense to me.
@carlolson1203
@carlolson1203 6 ай бұрын
Glad to see you added some new tools to help save your back.
@michaeld_68
@michaeld_68 6 ай бұрын
Good morning Pete. Gonna be a great day !!!!!👍
@tonyjones9715
@tonyjones9715 6 ай бұрын
Thank you Pete for another great video. A young man could learn so much from you if he would volunteer his time just to work with you. When I was young I would volunteer my time and help Older people and learn from them.They have a vast amount Knowledge.
@bobmoroney3643
@bobmoroney3643 6 ай бұрын
Another great morning watching your "new" tractor heading towards the finish line.
@briancupp6767
@briancupp6767 6 ай бұрын
Love the old tractors. Especially farmalls I love my cub
@montana4939
@montana4939 6 ай бұрын
Once again you have made winter so much more enjoyable spending time with your rebuilding. Although it’s just for a short period of time , it’s been interesting and fun . Your patience with and funny comments with difficult bolts , gears has taught me to be more patient with things on our small ranch . Thank you so much , you’re the best !
@kevintikivik
@kevintikivik 6 ай бұрын
Thank you for another shop class...
@henrikchristiansen6145
@henrikchristiansen6145 6 ай бұрын
Pete, Awesome as always..... Aloha...................
@joeanonemouse
@joeanonemouse 6 ай бұрын
I did enjoy the video Pete. I'm subscribed to a couple hundred channels and yours is in the top 5 or 6 so THANK YOU Pete! May God bless you and your family. 👍
@timgarth
@timgarth 6 ай бұрын
I was concerned about leaving the rubber band around the bearings, but that took care of itself. Now I am less anxious. About that.
@brianstevens2327
@brianstevens2327 6 ай бұрын
Probably stall the tractor
@stenandersen4696
@stenandersen4696 6 ай бұрын
Great video again💪💪💪
@raytinsman7815
@raytinsman7815 6 ай бұрын
Nice work, Pete
@rosesmith8727
@rosesmith8727 6 ай бұрын
first time commenter..i make my tractors look new and let a local mechanic do the nuts and bolts repairs.. to each his own level of ability.. you are very interesting to view.. thanks for another enjoyable video..at least you didn`t draw blood on this one..
@andysingleton100
@andysingleton100 6 ай бұрын
Really enjoy your great attitude and methodology to working in this 856. Thank for sharing this experience with us
@Flowing23
@Flowing23 6 ай бұрын
Thank you, Pete,
@lyn2839
@lyn2839 6 ай бұрын
Good morning. Really enjoying videos.
@ebshaw5974
@ebshaw5974 6 ай бұрын
Great work Pete
@timothyrill3825
@timothyrill3825 6 ай бұрын
Your Father's ability to redo a part is so helpful and you know it is right. Amazing video Pete! Really enjoyed it. Thank you for sharing and all your efforts.😊
@williamgawel8467
@williamgawel8467 6 ай бұрын
Good morning Pete great video I like the part where you had your father repair that part for your tractor. I’m going to work with my grandson when I do my Ford to end in the spring and I’m gonna be passing a lot of my knowledge I hope to him so not only is he going to get the tractor but he’ll get some of the knowledge I have and hope he help because hell, I’m 80 years old. I don’t know how much longer I’ll be around but I want him to learn as much she can while I’m still here. Thanks again.
@byronholmes2496
@byronholmes2496 6 ай бұрын
Good day to all.
@frankrizzo3915
@frankrizzo3915 6 ай бұрын
Good morning Pete!
@louievdo7631
@louievdo7631 6 ай бұрын
Another great job Pete you amaze me at the intelligence of your work
@ezone913
@ezone913 6 ай бұрын
Nice editing, Pete. Thanks for sharing. -EZ
@RatdogDRB
@RatdogDRB 6 ай бұрын
Always a pleasure, Pete. I'll bet the old gent you bought it from would enjoy climbing aboard to see/feel the difference you're making to his ol' pride and joy.
@user-su5tq6bg9f
@user-su5tq6bg9f 6 ай бұрын
Morning Pete
@OmniRed502
@OmniRed502 6 ай бұрын
My anticipation is heighten, as we're getting closer to the final stages. i like the use of the rubber band to hold the pin bearings, such a useful tip. i can not wait to hear her purr. Pete this 856 is going to love you back in bunches.
@mikeharrison3144
@mikeharrison3144 6 ай бұрын
Pete, I have to admit to a little "hero" worship. I wish I had the knowledge and talent that you have to do the things you do!
@dennishill3463
@dennishill3463 6 ай бұрын
Thanks and GOD BLESS 😀
@realtruthhurts8851
@realtruthhurts8851 6 ай бұрын
Thanks Pete. With your tutelage I believe I have finally mastered using a Ball-peen hammer. On what exactly is another discussion according to my wife.
@shawnwright2356
@shawnwright2356 6 ай бұрын
👍a load leveler is a great investment. Saves time and energy. The short chains with hooks are handy for other purposes also.
@oldcars5547720
@oldcars5547720 6 ай бұрын
Always a pleasure to watch you work. You do things precisely how I would if I had your skills. Every installment is outstanding -- among the best instructional videos on You Tube!
@davidbarnes706
@davidbarnes706 6 ай бұрын
I really enjoy your rebuild videos
@hl8256
@hl8256 6 ай бұрын
It sounds like your dad is an amazing fellow
@nathanalmond8280
@nathanalmond8280 6 ай бұрын
Great job Pete. Thanks for sharing the video.
@thirrybelisle
@thirrybelisle 6 ай бұрын
I wish i had the ability to tear apart a tractor and put it back together without having parts left over 😂
@bobmclemore
@bobmclemore 6 ай бұрын
Me also
@denniswilhoite6715
@denniswilhoite6715 6 ай бұрын
Very nice Pete - if you keep doing tractor rebuild videos you're going to need a new building to store them all in!
@callingcillian3249
@callingcillian3249 6 ай бұрын
Hey Pete I appreciate every second of your videos thank you for everything you do!
@Thomas-zu4ci
@Thomas-zu4ci 6 ай бұрын
Great video as always and good morning!
@jeanohlerkingflower7284
@jeanohlerkingflower7284 6 ай бұрын
I'm still amazed that you remember what pieces go where when you put these back together. And then it all works!
@donmears4090
@donmears4090 6 ай бұрын
What l like about your tractor restorations is you get them working like new and then you work with them. No trailer queens on your farm. 👍
@anthonydolezal6627
@anthonydolezal6627 6 ай бұрын
It's amazing the engineering on these old tractors. Done with sliderules not computers. Thanks Pete! Keep Smilin!!!!
@andrewpaige6571
@andrewpaige6571 6 ай бұрын
I’m Always excited to hear what you have to say about the farm. I hope to hear that the cows in the calfs coming soon with along with the pigs.
@bobbailey4954
@bobbailey4954 6 ай бұрын
Hello Pete I sure am enjoying this rebuild. Couldn’t help to notice where have the jokes gone with an occasional joke it would be a perfect video. Thank you and hello to Hilary and family from Phoenix
@jamesmorrison1884
@jamesmorrison1884 6 ай бұрын
Enjoyed your video Pete have a great day.
@gordonbuss1476
@gordonbuss1476 6 ай бұрын
It amazes me how the replacement parts for the old tractors are available. Could you share with us what some of these parts cost? It would be interesting. Thank you
@robertpaolucci6778
@robertpaolucci6778 6 ай бұрын
Redrunrite is what Pete has mentioned previously where some of the parts are sourced from.
@frostyice218
@frostyice218 6 ай бұрын
Can’t wait for the next one! Another GREAT job Pete
@patience1226
@patience1226 6 ай бұрын
@13:48.... Too funny... I want to guard my eyes EVERY time ..( my husband was a welder)..
@larrykrise3609
@larrykrise3609 6 ай бұрын
hi pete.you are still awsome,and im still lost,lol i enjoy the vidieos very much.
@patience1226
@patience1226 6 ай бұрын
@6:56.."the click of my internal torque wrench".... HAHAHA!! sounds like your internal Torque wrench could use some lubricant!!😂
@robratcliffe5635
@robratcliffe5635 6 ай бұрын
Or maybe a disc in his back letting him know, "That's enough, now!" Lol
@allannantes8583
@allannantes8583 6 ай бұрын
That internal torque wrench works great, or you could use the German torque wrench that says “That’s goodeneuf”. For me though I just stop whenever I hear gas flowing through a very small diameter orifice. I think it is air escaping from the threads of the bolt.
@lynnbrewer43
@lynnbrewer43 6 ай бұрын
I admire the way you work Pete. Great job explaining everything.
@jclint1968
@jclint1968 6 ай бұрын
I have really enjoyed watching you rebuilding the tractor. I have never been a guy who enjoyed mechanic work, but admired folks like you who have the love and ability doing this rebuilds. Just this morning I took my brother to pick up his dump truck and met the mechanic who does his repairs. Miles is a heavy equipment Mechanic and I asked him what piece of he enjoyed working on the most. Miles said he enjoyed working on Caterpiller D10’S. I guess every mechanic has his favorite machine or brand of machine he likes to work on. Growing up on a dairy farm we had a International Farmall H and a Ford 8N, now you know how old I might be. I can’t wait to see you finish the rebuild and see the tractor running like a kitty full of cream. I love ever minute watching you work!
@johnmccutchen1787
@johnmccutchen1787 6 ай бұрын
Thanks for the great video Pete.
@theresahansell3507
@theresahansell3507 6 ай бұрын
It's so great you still have your dad.!!❤ Hope he's around for many more years.
@ianclarke4660
@ianclarke4660 6 ай бұрын
Amazing detail and very interesting video. Your explanation is first class.
@johnshort1536
@johnshort1536 6 ай бұрын
Excellent series Pete, keep em coming.👌
@davewallace.8303
@davewallace.8303 6 ай бұрын
Pete, I think you NOW have enough blue thread lock for the next YEAR1! That’s the biggest bottle I’ve ever seen… 😂😂😂
@NakedDave100
@NakedDave100 6 ай бұрын
Your theory on restorations is right inline with mine!!! You're so soothing to watch and listen to and the machinery is the right color!!
@camo-dad7424
@camo-dad7424 6 ай бұрын
Thanks Pete 🙂. Got to spend another enjoyable morning drinking coffee with you. 22 degrees here this morning. Good time spent inside.
@user-od7rv5re3t
@user-od7rv5re3t 6 ай бұрын
I'm glad to see there's some people out there to steal. Want to do the job, right? Thank you, Pete
@skipbasil2937
@skipbasil2937 6 ай бұрын
It's always great watching you install new parts and how well it all fits together. Nice job Pete and thanks
@jeffreydweeks
@jeffreydweeks 6 ай бұрын
Pete, You rock man. My wife and I enjoy you so much. It was great meeting you at the show last year.
@philvanim4888
@philvanim4888 6 ай бұрын
Great job showing and explaining in enough detail for a DIY guy like me!
@alspeers6931
@alspeers6931 5 ай бұрын
Impressive levels of specific information and knowledge my friend, love ur show, it's like a constant seminar for me and my machines, thank you bro
@paulmoore8520
@paulmoore8520 2 ай бұрын
Thanks for sharing Lovely job
@michaelmanbeck9159
@michaelmanbeck9159 6 ай бұрын
Hi Pete..Outstanding video again today...you give me a lot of satisfaction watching you putting your tractor back together....and your knowledge is impressive..thank you enjoy your week....
@criagcundiff2469
@criagcundiff2469 6 ай бұрын
You do good work Pete.
@JustaFewAcresFarm
@JustaFewAcresFarm 6 ай бұрын
Thank you.
@ryanboldt7751
@ryanboldt7751 Ай бұрын
no idea how a transmission works but this helps and was explained well.
@ernest7015
@ernest7015 6 ай бұрын
I knew you weren't going to leave that rubber band. lol. Always good content!!
@petefehr8728
@petefehr8728 6 ай бұрын
Another great video, thanks Pete!
@robmichalowski8428
@robmichalowski8428 6 ай бұрын
Good morning Pete so happy to see you using craftsman tools instead of the over priced snap on tools .
@johnroberts5602
@johnroberts5602 6 ай бұрын
I am NEVER disappointed when I stop by here during your restoration projects.
@thomasheaney2087
@thomasheaney2087 6 ай бұрын
Thank you
@albertkolthof8000
@albertkolthof8000 6 ай бұрын
I have really enjoyed watching you fix up the tractor . I did not know there were different kinds of lock tight ! Of course I have been enjoying all of your videos ! Thank you for sharing !
@jetflyer102
@jetflyer102 6 ай бұрын
Great video Pete.
@chesterarnold5975
@chesterarnold5975 6 ай бұрын
Great job Pete
@ryanevers7563
@ryanevers7563 6 ай бұрын
When you are finished, you will have a great tractor and your viewers will have the education and entertainment for long to come. Thanks. Have a great day!
@leonardbechler1867
@leonardbechler1867 6 ай бұрын
Kid's clothes rags are always around the shop reminding you of ten years ago.
@cambian3
@cambian3 6 ай бұрын
Enjoyed the video alot!~ Thanks for sharing.
@mikedaugharty5544
@mikedaugharty5544 6 ай бұрын
Again Pete great job and a great video
@etruedus
@etruedus 6 ай бұрын
Thanks Pete for the video!
@rickharper6320
@rickharper6320 6 ай бұрын
Very informative video. Thanks !!!
@firemanj35
@firemanj35 6 ай бұрын
What a great start well, almost a start. To my day. It actually started a 04:30, but you're close enough. Thanks Pete
@hanumon22
@hanumon22 6 ай бұрын
I'm still with you. Thanks for your humble, genuine and passionate approach to helping other learn. It is apparent that you are passionate about helping others with an endless intrinsic reward. Keep doing a great job. SW Ontario Canada
@user-di7in2zx1c
@user-di7in2zx1c 6 ай бұрын
Koodos from another Canadian
@stevenewhook6967
@stevenewhook6967 6 ай бұрын
Love watching... Please keep educating us with your work ethic.
"Unsplitting" the Tractor | Farmall 856 Restoration Episode 9
24:32
Just a Few Acres Farm
Рет қаралды 120 М.
Tearing Down the PTO and Brakes | Farmall 856 Restoration Episode 11
23:53
Just a Few Acres Farm
Рет қаралды 105 М.
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 11 МЛН
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 5 МЛН
طردت النملة من المنزل😡 ماذا فعل؟🥲
00:25
Cool Tool SHORTS Arabic
Рет қаралды 24 МЛН
Incredible Dog Rescues Kittens from Bus - Inspiring Story #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 29 МЛН
Fixing Sloppy Shifting on the Farmall 756
17:46
Just a Few Acres Farm
Рет қаралды 94 М.
Adapt ANY Engine to ANY Transmission!
26:14
MacroMachines
Рет қаралды 1,7 МЛН
Repairing the Farmall Super C Hydraulic Pump and Applying Manure Spreader Decals
30:47
It's Called Crimping 😄 What Happened to the Challenger Tractor
19:13
Acres of Clay Homestead
Рет қаралды 43 М.
How We Started the Farm
25:51
Just a Few Acres Farm
Рет қаралды 289 М.
The Great Manure Spreader Makeover (New Holland 514) Part 1
32:07
Just a Few Acres Farm
Рет қаралды 192 М.
1 Year LATER   - Tour the Barn (Feb 2024)
19:02
Pecan Grove
Рет қаралды 18 М.
A Snowstorm on the Farm
33:43
Just a Few Acres Farm
Рет қаралды 278 М.
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 11 МЛН