Rekordbox DJ Tip: How To Hook Up CDJs To Your Laptop In HID Mode

[@captialgains8050]

Hey buddy i tried the exact steps but the cdj900 nexus won't connect it get stuck after pressing the button to link. Do i need to have any licenses or anything to make it work?

[@santiagolozano43]

Hello! I am having some problems with the connection with rekordbox, every time I push connect with the roll button it stands by just saying connecting but I couldn't select the deck after. What should be the problem? I have 2 CDJs 2000

[@DJDripp_]

Same is happening with me

[@camo2802]

Same with me

[@camo2802]

Mine just says USB midi and you can scroll to assign to the deck

[@392frosty3]

You are using the free version of the software. You will need the paid version for performance upgrades. This was a major miss in this video

[@arielleroberge7925]

I have the same problem ! Did you manage to make it work ?

[@gunjabeans]

That didn't work for me. I have 2 CDJ's and an analog mixer. Rekordbox does recognize both CDJ's and I can select one or the other for Audio, not both. I can not get them to control rekordbox either via the link button.

[@iliasmorichovitis6474]

same with me, already an answer on it ?

[@Kevin-od5tn]

Hey Joey, your tutorial really helped me when I moved onto a club set up from a bed room setup. However on the night itself, I had accidently selected deck 3 instead of 2 for my second CDJ, and that caused a lot of issues. How do i go about reconfiguring this without disconnecting the CDJ? I did this and the entire sound system shut down hahah thank god I had a usb in the 3rd CDJ

[@TunesbyJuba]

They always do it: first cdj is always deck 2, second cdj on deck 3

[@EnzoBalsamoprofessionaldj]

you say that 3 usb cables are needed, in the video I only see 2 connected to the hub, which I suppose are those of the cdj-2000, and the one of the mixer I do not see it? Where do I connect it? to the hub? or the laptop?

[@muratti72muc]

doesn't care. You can put it also in the hub or direct to the laptop. Also you don't need a powered hub. CDJ's and Mixers have there own power, a powered hub you just need when you use the hub for power, charger and transmission. Extra controller or effect units also better use with there own power. One RMX-1000 normally no problem. A Pioneer RMX-1000 need ca.200mA power little more than a traktor control F1. Hardware is always better when they have there own power. A usb2 hub with 500mA (USB3.0 900mA) just split the 500mA to all slots, a powered usb hub you have at every slot 500mA(900mA). For transmission you need just 1mA each unit for sent/return.

[@dlboy2008]

Can you use one usb for the cdjs and link the two.

[@Pinkspace]

and how do djs switch when both need to but in the three usb b cables?

[@digitaldjtips]

Are you just thinking B2B or more than two DJs?

[@kodojak7738]

Thank you for the tutorial Joey. This was definitely helpful to help me set up for a big gig. Question though, how would you go about setting up a b2b with another DJ that's using strictly USB flash drive on the CDJs whereas I'm using Rekordbox DJ on the Laptop? Would he connect his USB in the HUB; Does the physical display on CDJ mimic how it would show as if it was connected directly to the CDJs? Or, would he connect directly into the CDJ and ... ? Much love

[@digitaldjtips]

Hey Kodojak! Try this: He can plug his USB thumb drive into either CDJ, and you can connect your laptop using USB cables (if on a Mac, get the CDJ/XDJ Aggregator to make it easier). Whenever it's time for you to spin, hit the "Link" button on the CDJ that you'd want to use (you'll be asked to select which Rekordbox DJ deck you'd want to control). When it's your partner's turn, she / he just presses the "USB" button on the CDJ he / she wants to use :) See if that works for you!

[@kodojak7738]

Digital DJ Tips Thank you! We'll try that :)

[@itsdjamyth]

Which USB hub is that.

[@menscherde]

Which USB Cables do I need? Usb A, Usb B?

[@uriels4097]

So I have my sound card plug to my PC, can I connect DJM900+cdj2000 to my computer and then have the sound comming from my PC? I only have one set of monitor and I don't want to unplug them all the time

[@digitaldjtips]

If your DJM900 has a sound card (like the NXS models) then yes you can :)

[@ligeond]

Ok. Let say I hook the laptop and put audio on the mixer channel 3 and 4. Can other dj still play usb sticks normal using channel 1 and 2 on the mixer when i finished playing or started to play?

[@hayloexplores]

Can you do this with the DJM-800 mixer as there is no usb port on it?

[@gantraks]

Hi Joey. You forgot to mention how to preview track on DJM from the playlist 😃 So, in Rekordbox you can set up playlist track preview by assigning Preview Output (in Preferences/Audio) for any the next available channel on DJM (exp. 3 or4) Also this channel input on DJM must be set up as USB. While previewing make sure the fader is down 😃

[@gqcwby]

Hi Joey. Great videos. I know that you can hook the 3 usb cables for each equipment into the laptop, however I did not see how you use the powered USB hub that you mentioned. Thank you

[@digitaldjtips]

Hey Hal! You can just plug them into the powered USB hub which goes to your laptop :)

[@gqcwby]

Thx. I did use the usb hub. Tried the lan cable adapter as well. Only one of my laptops has that port

[@djtoyo680]

Hi, please could you tell me how to connect two cdj 2000 with djm-s9 like the one you have in the video with rekordbox and all the features like hot cue, sample etc, please help me, thank you !

[@Madness915eptx]

Can you use cdj and laptop without mixer?

[@irvingmadison4808]

What's the difference between this & the LAN LINK ? I was under the impression that this was the Link feature (Hince previous question).

[@digitaldjtips]

Hey Irving, HID lets you control DJ software (traktor, serato, rekordbox, virtual dj). LAN link lets you access music from a storage device (USB drive, laptop, etc) across multiple CDJs connected via LAN Link :)

[@pauldubyou78]

Hello Joey, Can I view the full wave on the XDJ using HID with performance mode? At the moment I only have the needle search type wave at the bottom

[@ivanclow1983]

ivan clow 7 minutes ago I got big problem and iam new to play with record box. so I got djm 900nexs and 2 cdj 850 and if I play usb on one cdj and plug in other cdj to laptop I can get it work but then when I stop playing on cdj which iam play with usb and plug this cdj in laptop I get no sound but if i load drivers again then i can get sounnd but music stops for a few seconds not good and so what must i do to go from playing usb to rekordbox and rekordbox back to usb

[@HelderTeixeiraofficial]

Why I can’t connect? I just try a lot of times and not even open to chose decks

[@Hazelcut]

why not using the CDJ soundcard ? No need a usb hub with that (unless you have less than 2 usb on your laptop)

[@digitaldjtips]

You can do that too, using the CDJ Aggregator Tool if you're on a Mac :)

[@muratti72muc]

depends on your mixer. when you have a DJM900nxs2 and connect him also with usb to your mac then you have also quantize function between you CDJs. Means cue, hot cues, bpm, sync, master works like in the software. Also the effect unit become the bpm automatically. At the usb hub you can also connect 4 CDJ and the RCA you don't need anymore.

[@laurenspagen]

@@digitaldjtips i am wondering, if you need to use a aggregator tool because the mixer dont have a usb output , can you still use the effects ? Or can you do less because its not connect with your mixer ... , big thanks already for the respond!

[@digitaldjtips]

Yes you can do that too :)

[@laurenspagen]

Digital DJ Tips thanks for your feedback

[@07raggy]

Hey Joey, i am using Djm-850's and it's saying connected on the cdjs. Though nothing happens..? cdj -850 does't have a link button to press.??

[@larsdelheye849]

if i click link an turn the knob, it doesnt show deck 1 or 2 can somebody help asap??

[@djreetik8467]

What's the name of that cable which is connected to CDJ to Laptops

[@Dk10244]

have you a link to audio driver for djm 900nx for MAC OS? I can't find it on rekordbox site

[@jjbrandon4264]

Please help me! Great vid, everything is installed and ready, when i click 'push to connect' nothing happens and i cant scroll the dial right! :( please help!!!!!!

[@digitaldjtips]

What happens when you scroll the Browse knob left or right? Do you see changes in the Deck number onscreen? :)

[@TheSlutmillionaires]

@@digitaldjtips I have the same problem but nothing happens when Scrolling.

[@camo2802]

@@digitaldjtips literally just says USB midi and that's it . You can't scroll to deck 1 or 2

[@arielleroberge7925]

I have the same problem ! Did you manage to make it work ?

[@lukemcgovern1976]

Can this be done with 3 decks?

[@djdaale2364]

Let’s say I have the DJ 400, and I plug my laptop into the CDJ-2000NSX2, would my hotcues and my saved loop also appear in the CDJ?

[@digitaldjtips]

Yes you'd be able to access hotcues and metadata because they're stored on the songs that are in your laptop :)

[@carlopietrellaB787]

hello ...i just bought two xdj 700 can't connect via usb cable to my mac and rekordbox since when i press link function the player is not found . I have all the firmware updated ....audio on mac check and ok .....third part program authorised....nothing ...i used also aggregatore which work.....last ...i am using the free version and i have the impression the perf mode on record box vers 6.x.x is not allowed . What do you know ?

[@Sashasvids89]

What kind of usb cables are they? are they usb to usb or usb to what?? and is there any particular powered hub you recommend?? thanks for the video!! :)

[@Sashasvids89]

currently using two cdj nexus 2000 & djm 900 nexus

[@digitaldjtips]

They're just standard USB-A to USB-B cables (like the ones used on DJ controllers and printers) :)

[@Sashasvids89]

@@digitaldjtips thank you! :) is there any particular powered usb hub you would recommend??

[@1saumyadeep]

What laptop u using ? Mac or windows??

[@digitaldjtips]

We use Mac.

[@1saumyadeep]

Which model will be best ? And thank you very much for ur info

[@nkemsamuelnnanna]

I've done hid mode without connecting to the mixer

[@muratti72muc]

then you use just the link function from your players. The beat fx is not sync without a link to the mixer.

[@GreaterThanSolomon]

How

[@pictonmix]

Thanks for this was a massive help setting up my equipment 🙏

[@digitaldjtips]

You're welcome!

[@EnzoBalsamoprofessionaldj]

How connect two laptop and move from one laptop to another in hid mode CDJ2000 nxs2 and pioneer DJM900nxs2 without having to turn off the music?, Make a video please.

[@gilandre5538]

Can I connect this way even when a usb/laptop is already playing?

[@OoGlazM]

can i do this and run four channels if i have enough cords?

[@derekdarkomusic]

HELP: I get successful connection to mixer and decks but I dont have the DJM mixer showing for audio output (CDJs do show up) and ive installed drivers multiple times as tried on a couple different mixers. Someone please let me know how to fix this

[@aubainsnipe94nyc]

I have the same issue too. Someone help...

[@aubainsnipe94nyc]

okay. It worked for me. This is what you need to do: Luana (Pioneer DJ Global) Sep 17, 00:49 JST ​ Please follow these instructions to get your DJM-900NXS2 operating properly: 1. Disconnect the DJM-900NXS2. 2. Download the driver. 3. Open the driver package and run the uninstaller file. 4. Reboot your computer. 5. Open the driver package and run the driver installation file. 6. After the installation has completed, give the drivers permission if necessary (High Sierra and Mojave). 7. Reboot your computer. 8. Connect the DJM-900NXS2 and test as normal. Thank you,

[@digitaldjtips]

Awesome!!

[@Yuts44]

Really nice tutorial, thanks a lot! So, it's exactly the same than to use CDJ Aggregator Tool on Mac ? We could control our software Rekordbox with the CDJ in the both of case ? Because I gonna use CDJ2000 + DJM800 after a guy, he's gonna juste play without computer. I would like to connect my MacBook. What is the best way for have no stop between him and me ? Maybe your way is better, because when he's gonna play his last track on the deck 2, i could connect everything, do the setting on the Deck 1, and the channel 2. And do the Deck 2 and Channel 2 when he will stop his track. Thanks!

[@digitaldjtips]

You could connect Deck 1 and get it working with Rekordbox, play your first track there, then connect Deck 2 :) of course, this assumes that the CDJ you're using is updated / has the minimum firmware version to work with Rekordbox.

[@fredericosilk]

thank you!! but i din't see you plugging the DJM900 into usb hub. just to carify i will plug both cdjs and the mixer to the hub??

[@digitaldjtips]

Yes you can plug the mixer into the hub as well :)

[@Drum4Chops88]

Where do I hook up my external Hard drive?

[@DJRascalsham]

can i connect all 3 usb cables to my laptop without using the USB hub?

[@melsterne3484]

Great video...Would this be the same with Virtual DJ?

[@digitaldjtips]

Similar, yes.

[@tannerbeard6088]

Does this work for XDJs the same way?

[@PresbyterDJ]

When and why then would you use timecode cds or usb?

[@PresbyterDJ]

Especially if you can put them into HID Mode?

[@digitaldjtips]

The club CDJs may be old, or not networked - DVS basically "always works". It's a universal fallback.

[@dez5]

great video, very clear instructions. 🇧🇴

[@digitaldjtips]

Thanks!

[@kelvingozon]

Does it need to have a rekordbox license?

[@giampaoloastorga2405]

do you need to have a subscription to RB6 to hook up the cdjs in HID mode or you can do that with the free version too ?

[@digitaldjtips]

Yes you'll need a subscription

[@Aesop101]

@@digitaldjtips so I need to pay for a Rekordbox subscription, even while using a Pioneer A9?

[@shinobiish6495]

I saw lots of djs using HID mode but their still putting usb stick. What’s the purpose of the usb stick? Help pls im confused 🤦🏻‍♂️ thanks!

[@buschw00kie]

I guess for backup reasons, if the laptop crashes. You really do not need the USB for HID mode

[@stephannielsen9867]

Hello. has 2 CDJ 2000 NX. Using RB 6 and trying to get the big waveform on my CDJ. But can only get it if I put USB directly in player. Is this not an option to get from RB to CDJ? thank you..

[@digitaldjtips]

Are you analysing your tracks in Rekordbox before using them on the CDJs?

[@alexandergvgribatsch499]

I have this same problem. I get the wave at bottom of screen but not the main waveform. They're on the program though. I have 2000nxs. Not nxs2's

[@Amatteus]

My rekordbox in the preferences, audio does not show this black button that takes you to the drivers.. Do you know why and what kind I do?.. Thanks.

[@digitaldjtips]

Are you on Rekordbox 6?

[@Amatteus]

@@digitaldjtips Yes.. but I moved to 5 because 6 charges a monthly fee?

[@irvingmadison4808]

Can this be done with the Djm750mk2 & the Xdj1000mk2's ?

[@digitaldjtips]

Yes :)

[@baskin321]

yes it connects exact same way but mine randomly just stops i think i just need to buy a powered usb hub

[@jameshoskin9103]

Hi I’ve done everything and it works great but when I go to record it won’t let me? I’ve changed a few setting but when I start it only lets me record out of one channel

[@digitaldjtips]

Use the Record feature in Rekordbox DJ (Performance Mode) instead of the Record function in Export Mode :)

[@ronnieemeny4225]

any tips for ddj 400 as the driver wont show up for mine

[@digitaldjtips]

Not sure if this is the same issue you're experiencing, but forums are a good place to start troubleshooting :) Let us know how you get on Ronnie - forums.pioneerdj.com/hc/en-us/community/posts/900002832843-DDJ-400-not-recognized-as-audio-device-controls-don-t-work-in-Rekordbox-Windows-10-

[@ferdinandpelayo7914]

have old cdj 850 (AND antiquated djm 707) - what would be the next upgrade would you recommend (old school here from vinyl)?

[@digitaldjtips]

That's a huge question Ferdinand, check out our 2020 Gear Guide for all the info: djtips.co/join :)

[@SouthFloridaSound]

This seems different for the NX 2, When I hit link I get two choices each with a subchoice but no 1 or two. Any thoughts?

[@digitaldjtips]

What subchoice do you get?

[@stevec4100]

what about when the mixer isn't supported by rekordbox? can rekordbox aggregate the soundcards in the CDJs?

[@digitaldjtips]

Yes you can :) there's a CDJ Aggregator Tool from Pioneer DJ that lets you configure it

[@stevec4100]

ok cheers bruv

[@TheBaaco]

What is main difference betwen this and ethernet link? I seen video with ethernet link to a laptop, and when playing just like hid..i didn't find any video where they talk about this 2 mode, one vs another

[@digitaldjtips]

Ethernet Link basically lets you use your laptop as a hard drive (you can browse for tracks on the CDJs themselves)

[@MrDomsem]

What usb cables did you use for connection?

[@digitaldjtips]

Just standard USB jacks :) if you're using a computer with a USB-C output, you want want to get a USB-C to USB-B (the square jack) cable

[@savanmohammad-amen764]

i have a djm-800 without usb and two cdj2000. How do i make it work? Is there certain things i should select in preferences? When i only plugged the cdjs into the computer the mixer didn't work. Pls help

[@digitaldjtips]

You need to plug the RCA outputs of the CDJs to the inputs of the DJM mixer :) you then choose the CDJ/XDJ Aggregator in Rekordbox's preferences

[@savanmohammad-amen764]

@@digitaldjtips It seems like the Aggregator only works with apple/macs. I have a windows

[@muratti72muc]

@@savanmohammad-amen764 djm 800 have no hid mode. Only djm 850/900/2000 have this and Xone DB2/DB4/43C, Rane MP2015 and Denon X1800 prime.

[@shinobiish6495]

Question: Some djs using hid mode but on player theres a usb stick what’s the use of the usb ? Confused

[@digitaldjtips]

Maybe they have songs that are stored on the USB stick and not in their laptops? Or maybe as a backup in case the laptop fails :)

[@AlexReidMusic]

Ive done this with the XDJ-700's and the wave form no longer shows in peformance mode on the XDJ, can this not happen?

[@digitaldjtips]

No: forums.pioneerdj.com/hc/en-us/community/posts/360041863792-xdj-700-hid-mode-through-rekordbox-laptop-

[@djtrepound2407]

Can you still do it the old way with Ethernet as in older versions of Rekordbox?

[@digitaldjtips]

Yes you can! The laptop then just works as a hard drive :)

[@rossssd4969]

Yes you run rekordbox in Export mode and load tracks onto the players just like when using a USB stick. On nexus 2 decks you can you plug one USB cable into one of the decks and the tracks will be loadable for each deck. You also get an extra cue for previews. Check Mojaxx's video about Pro DJ link

[@Colo_skiing_ian]

Can you do this with CDJ 1000mk2?

[@digitaldjtips]

No :)

[@mattshawz]

I noticed that in the DJ Mixer drivers there is no DJM800 - what should I use?

[@digitaldjtips]

You can use connect the CDJs to your laptop and output through them so you don't have to connect your mixer :) if you're on a Mac, use the CDJ / XDJ Aggregator to connect the CDJs to your laptop

[@boltair3]

Do I need to update my cdjs?

[@digitaldjtips]

HID has been around for a while now, but always a good idea to update your firmware regularly :)

[@arveemusik]

hey how to go with digital with using hid mode with laptop please say me strp by step please let me know

[@digitaldjtips]

If you need more help than in this video consider coming and joining our Global DJ Network: djtips.co/family :)

[@Sashasvids89]

Is there any particular powered usb hub you would recommend???? :)

[@D.A.V.E.TheDrummer]

That amazon one he has in the video is good, I have two and they never let me down.

[@bigmoomusic]

man idk what's wrong but this doesn't work at all for me. Rekordbox acknowledges that it's linked but doesn't seem to give a shit after that. There's no connection between the laptop and CDJs in terms of sound or control

[@warrenedward1462]

are you using recordbox Dj and not the standard rekordbox? You need to have Rekordbox DJ and use performance mode

[@djjanandrada]

Does Rekordbox 6 supported? i have license key for rekordbox 5

[@digitaldjtips]

I'd assume so, haven't tried it though

[@djjanandrada]

@@digitaldjtips I cant try because I don't own a CDJ :3.Can you find out for me? I have license in Rekordbox 5 but I don't know if it will still work in version 6.

[@Dylanvh]

Do i need a licence to use a 2000nxs on rekordbox

[@VDJ_SHIBA]

hi joey !! i am also using Rekordbox in hid mode . but this saturday i went to a club but the cdj 900 nexus connect properly with cdj agreegeter but No music output are coming from djm 900nxs 2 mixer ! i was using only two usb cable that time ! but in previous event i went to another club that club hv 2000nxs2 in that , but everything was connected properly with cdj xdj aggregater !! i am facing a big problem now !!! please help me out !

[@digitaldjtips]

Check your Rekordbox DJ settings if you've got the output selected to go out of the CDJ-900NXS :) you may also have to install a specific driver in your laptop to get the CDJ-900NXS working

[@VDJ_SHIBA]

@@digitaldjtips thank you it is really helpful

[@MrFriterad]

When I go to select driver and choose my mixer, it pops up that the resource is already busy? What does that mean?

[@digitaldjtips]

What OS?

[@ic3manofficial]

You must have the license for Dvs to work perfectly ?!

[@digitaldjtips]

Not for HID mode :)

[@nkemsamuelnnanna]

You don't need the DVS for hid mode

[@COSMINofficial]

thanks Budddie

[@djadamlive]

I'm having problems getting the DJM900xs2 driver to show up on my CoreAudio section in Rekordbox's preferences on my Mac OS Mojave 10.14. 6. When I go to preferences and click on Driver then select and install DJM-900NXS2_M_2.0.2.dmg it says it installed successfully, but I don't see it in my CoreAudio to select it. Can you help me on this issue please? I'm using Rekordbox 5.7

[@digitaldjtips]

I'd suggest talking to Pioneer directly about that

[@djadamlive]

@@digitaldjtips I finally managed to set it up and found out what my problem was. I found out that the driver for DJM900NX2.dmg didn't work with the mixer DJM900NX2, so for the sake of it I installed just to see if it would work DJM900NX.dmg and it worked! Not only did it work but when it was installed it showed up on the setup pannel that it's connected to the DJM900NX2! Really wierd that the driver DJM900NX2.dmg didn't work but the driver DJM900NX.dmg did work with the mixer DJM900NX2. Even after installing the DJM900NX.dmg it shows up in the preferences DJM900NX2!

[@misterluxu3886]

i just bought the USB C to Printer from you guys, thinking it would fix my audio problems on my DJM 900 nexus and DJM 2000 nexus. but when i record, my macbook 2018 pro still makes a static noise, it doesnt record. anybody can help me with this, im frustrated i just used my gaming laptop (windows) and it records fine out of serato. anybody know whats the issue with my macbook? or what do i need to do to fix this?

[@digitaldjtips]

Sorry I think you're confused, we're a DJ school we don't sell any equipment - perhaps the Pioneer forum can help with your issues though if you give them some more info

[@tineygerm301]

YES! If there was a love button i would hit it! haha thank you

[@davidreynaud7614]

Hi . I have a pair of cdjs 900nxs ; i was about to buy a djm 450 mixer ; in order to have the same setup as you in here; but the guy at the shop told me i need to get the pioneer timecoded cds in order to control rekordbox from my cdjs .. so i m a bit lost .. so i didnt get the djm 450 mixer ( i wanted to get it cause i like it because of the fxs in it and the soundcard+ the rekordbox dj licence comes free with it ..) So do i need these timecoded cds ..? Thanks a lot

[@digitaldjtips]

Timecode is for DVS not HID mode so no they're not needed

[@davidreynaud7614]

Digital DJ Tips ah ok .thanks .

[@lee_vs_the_world]

What mixer is that? Djm 750?

[@digitaldjtips]

No, I believe it's a DJM-900NXS

[@lee_vs_the_world]

@@digitaldjtips ah ok thanks

[@001rasha]

halo i have spiaker mackie c300z - rms, 300 watts - muzic.500 watts - peak.750 watts - I want to buy an amplifier and do not know how many watts it takes to ask if you can help with which amplifier should thenx

[@digitaldjtips]

Hopefully this will help: www.digitaldjtips.com/2013/05/beginners-guide-to-pa-systems-part-3-amps-speakers/ :)

[@theplaceoftaste6890]

does this also work with serato pro?

[@digitaldjtips]

Yes, using HID mode.

[@neddeep7655]

Can i use it for rekordbox free?

[@muniex83]

Hi can someone help.While I connected cdj 2000's to rekordbox I can't scratch or backspin in vinyl mode.seems like jogwheel is not responding?all usb leads checked also cdj's work fine in usb or cd mode.Anyone?

[@digitaldjtips]

Never heard that before muniek1983. Have you tried asking Pioneer customer support? www.pioneerdj.com/en/support/contact/

[@jamiestonebridge9919]

muniek1983 make sure your laptop spec is up to scratch. Rekordbox requires minimum i3 processor 2ghz and 4gb ram. I struggled the same until I got a better laptop.

[@jaimeobeso7384]

Could someone give me the link to download te driver for te cdjs and dims please?😃

[@jaimeobeso7384]

CDJ and DJM 900. Please!

[@specialformula14]

can you hid mode with xdj 700?? through laptop with rekordbox?

[@muratti72muc]

for hid mode the mixer is important. He must be connected to your rekordbox on your laptop. xdj 700 have a link function. hid mode is the same when you link your players. The extra is to connect your mixer to the players and use your rekordbox library and bpm beat fx sync. With hid mode your bpm is sync like when you just use link your players. But also your beat fx section at the mixer is bpm sync, you don't have this when your mixer is not connected. Also you don't need RCA (cinch) cable anymore to connect your players to the mixer. It all works digital with the switch. You also do not need a switch with power because the digital signal is so small. Power switches you just need when you use maybe effect units or other units who gets there power just via usb switch. Players, mixers and also some effect units have there own power cable. Means only the small digital signal where sent via the switch. For just this small digital signals you don't need a powered switch. For me that i use the HID mode is the biggest advantage to use the library when you play longer sets. You find easier songs on the big screen from your laptop. HID mode without laptop i play for smaller 2h sets who are already prepared at my usb flash drive.

[@digitaldjtips]

Thanks for sharing, aomunich.

[@CatnapAndDogdayFriends]

i do have cdj2000 nex and djm 2000 and when i setup everything as you do it on the vedio I just have one cdj work can you help plz

[@digitaldjtips]

Hey Feras! How many USB cables are you using? Are you using a USB hub? If so, is it a powered hub? :) Give me more details -Joey

[@georgeandreou9626]

How a second dj can connect him laptop during a club event or smthing? with no music stop using this hid mode

[@digitaldjtips]

You can plug in your laptop in the DJM900NXS2's USB jack and play music through it if you set your output right :) that will give you time to remove the USB cables and plug into your laptop, and then you can set the outputs to them one by one after. You can also just play a song / mix from a thumb drive or CD on one of the CDJs (switch to line mode on the DJM mixer), and then remove the USB jacks from the previous DJ's laptop and move to yours!

[@jz5748]

why my rekordbox look different?is it because i dont have pioneer cdj?

[@boo3427]

Probably not in performance mode, additionally you can enable the tabs at the top

[@elpelon3404]

can i use a non mac laptop?

[@digitaldjtips]

Yes

[@cruzianfibergeek]

What about recording your mixes with that setup?

[@digitaldjtips]

Best bet would be to record the output of the mixer with something like MixBox Evermix.

[@neilfds]

How do I record my set ? Can you help me out, Thanks :)

[@digitaldjtips]

What gear are you using Neil?

[@neilfds]

@@digitaldjtips A pair of CDJ 2000 Nexus 2, DJM 750K , Macbook pro 13", Rekordbox DJ 5.4

[@neilfds]

I've managed to use it in HID mode in Rekordbox DJ & Traktor pro 2. But the challenge here now is how do I record my sets live. Please advice....

[@digitaldjtips]

Your mixer has a Record out, I'd buy something like the RODE SC4 and then download the DJM-REC app :)

[@neilfds]

@@digitaldjtips Im confused.... How do i connect that to rekordbox app ??

[@khikashi]

For some reason the mixer will not show up in the preference/audio tab and thanks for the awesome video been looking for something like this!

[@digitaldjtips]

Hmm that's strange, if you work it out let us know :)

[@vattanaksvay8311]

Hi ..How to download Rekordbox full for pc

[@DJRascalsham]

you need to purchase the software bro. www.rekordbox.com

[@djjanandrada]

Thank you!

[@digitaldjtips]

No problem :)

[@djbykonz5531]

thanks was looking forward to this

[@digitaldjtips]

You're welcome :)

[@ClectaSkiMusic]

Cool looking shirt dude

[@digitaldjtips]

Thanks man! It's a contemporary take on the "barong", which is traditional Filipino formal wear :) -Joey

[@cogdj6452]

im just now figuring out i need a rekordbox subscription even though i spent boatloads of money nxs2 cdjs and mixer....what a sham

[@digitaldjtips]

Thanks for watching

[@nkemsamuelnnanna]

Rekordbox DJ DVS is the way

[@nkemsamuelnnanna]

I only use hid mode when am the only one DJing that night. I've got the dvs functionality on rekordbox DJ but when am using it on hid mode I don't plug a USB cable on the djm only on the cdjs

[@bboymac84]

These pioneer mixers should have USB hubs by now