Reliable-700SB Portable Blindstitch Threading the Machine

How to thread the Reliable MSK588 Portable Blindstitch

[@saraaronzon4562]

Thank you for showing the actual threading! Unlike other videos who tie off an existing thread.

[@saraaronzon4562]

Finally got mine threaded with your help!

[@sallycole8880]

Thank you for this video. I could never have done it alone.

[@saraaronzon4562]

Me too!

[@CeNadraz]

Thank you very much! How do i secure the thread after sewing ?

[@rosewang2765]

Thanks I have big problems thread on tension . Thread go top then too loss then hanging on the front

[@CleverEwe]

Good as this video is, you need to supply more detailed videos on its operation, as the manual is vague.

[@saraaronzon4562]

Man, I almost pulled my hair out trying to thread needle! Do they make larger needle eye?

[@ReliableCorporation]

Here's a tip to help you thread the needle: It's helpful to use tweezers to grip the thread. By pinching the thread about 1/8 of an inch from the end, you create a shorter length of thread, which makes it easier to control and more stable as you guide it through the needle's eye. This technique can help prevent the thread from fraying or slipping, making the process smoother. Hope this helps!

[@saraaronzon4562]

@@ReliableCorporation thank you for responding, I tried it tonight and it worked! I was about to give up the blind hemmer. I am forever grateful.

[@bmitchell4419]

Would love a video explaining how to use the pressed feet. Especially for installing zippers. Can just one part of the foot be used? It is hard to know how to sew close to a zipper

[@ReliableCorporation]

Hi - Thank you for your question. The 700SB is a blind stitch machine and not suitable for installing zippers. You would need a single needle machine for this task. You can call one of our senior technicians for advice regarding this at 1-800-268-1649 (ask for Nathan or Brian). [e-mail]

[@tammypadgett2636]

Can you use this machine to attach quilt binding?

[@tamilyncreations]

Can you please send me a "how to thread bobbin" video for my Reliable MSK-1541S I cannot find one ANYWHERE. The instruction manual is very vague and it's a new machine. I'm right in the middle of a project :( Please? and Thank you....Tami