Its so awesome when these companies think just like the DJ's and see our needs. Thanks Mojaxx
@Brunoakabliquid11 күн бұрын
One question: in my case. I have the following equipment: MacBook Pro 2012 Serato SL3; Phase; Novation Dicer. Would I necessarily need to use an additional charger on the Stand Hub so that it doesn't "overload" one of the Macbook's USB ports? I say this because the MacBook Pro's USB ports also supply power to the devices connected to them. Thank you very much.
@DjLimpz3 жыл бұрын
Why not have the same ports on both "legs"? i would pay more for that, then you can choose what side you wanna use when you the layout in the dj booth, sometimes you doing b2b sets and both cant have LT on the same side, and bending cables is not a favorite for me. Or if the hub "breaks/crashes" you can just switch legs and keep going...Just my thoughts.
@h-dawg9698 ай бұрын
Yo. Will this work as a decent stand/hub for N.I Maschine? I need to be able to raise my Maschine above the height of my keyboard, (S61mk2) so this could be the ideal solution... Has anyone used this stand for something like a Maschine at all? Cheers
@davidreeve44102 жыл бұрын
Just got this today, very disappointed to find the usb C to usb A cables are only usb 2 standard and not 3. Whats the point in a usb 3 hub if the included cables are only usb 2. Had to purchase a separate usb c to usb 3 cable to get my ssd working at correct speed.
@nasrihattar3225 ай бұрын
Can I run my external harddrive and rev7 into that hub without compromising data transfer, latency, and audio quality?
@DJSwitchPDX3 жыл бұрын
Dude ... I love this thing so much. I did a review for another channel on the Stand Hub and talked about how (and why) I've never owned a stand until I saw this one. Absolute game changer.
@Phetta3 жыл бұрын
Looks amazing! I went for a Satechi USB-C On-the-Go Multiport Adapter as it offers 100w charge through, network and HDMI ports too.
@personal-development-strategy3 жыл бұрын
That’s the route that i took too because i use an iPad more than i do a laptop. But i do think i will still end up buying this stand still. What i like is that it has more than 1 USB port unlike Satachi
@CJ-gp9yh3 жыл бұрын
Hey Mojaxx, I recently plugged my 2016 MacBook Pro into my NUMARK Scratch mixer that I bought (thanks to your review!) and I was shocked that Serato has huge audio distortion/loss problems when using a USB Hub. If I plug right into my laptop with no hub, sounds perfect. If I plug the Hub in the extra USB-C port, it sounds like absolute garbage, huge distortion and even the serato visual gets chuggy. Is this a known issue? Would this laptop stand prevent this from happening? Seems like a well kept serato secret…?
@APMdJ3 жыл бұрын
I have been using this stand for a while now and its great but be careful when assembling it, it comes with 4 long screws that screw to the pods and stand For some reason one of the screws ended inside the stand and there is no way to get it out, while DJing in a club somehow two of the pods became loose and one even feel off, the screw was probably more than half way inside the stand… (not to mention the noise it makes when handling it) Right now I am only using the 2 pods at the bottom and waiting for Reloop to reply my email where I ask them for another screw or a solution Other than that, I would recommend this stand, especially if you need USBs to connect the laptop to a Pioneer DJ mixer and CDJs
@PAE475 ай бұрын
Excellent 🎧👌😊
@grey56263 жыл бұрын
I've been eyeing this for a while though haven't been able to budget an upgrade from my Stanton Uberstands yet. Thanks for the review!
@Mojaxx3 жыл бұрын
Those Uberstands seem to never die!
@DjRudeboy2543 жыл бұрын
The only thing missing is an HDMI port otherwise great start!
@ItsMeEddyV2 жыл бұрын
The new MacBook brick is 140w. Would that be too much?
@djtntepic61403 жыл бұрын
Can I use my External Hard Drive ?? Meaning I would usually plug into laptop but with this stand could I insert into stand and still use it will I am mixing??
@lukeybizzel3 жыл бұрын
just wondering do the legs fit around a rane 72 for example - i can't seem to find specs on the space between the legs? Great review as always though. very tempted to buy
@DjRatchet3 жыл бұрын
Your sl3 works with Serato dj pro?? Mines won’t work
@johnparker82703 жыл бұрын
I just balance my lappy attached by a bit velcro on an old record box. When im done lappy, headphones etc go in the box am i a genius or just a bit cheap? 😂
@stanleymays38242 жыл бұрын
Good video, I'm considering getting this but the price tag got me taking my time making that decision. I want to know what are those devices you plug into the hub and what they are use for? I never heard of a phase.
@seppobeats98953 жыл бұрын
Hey, is the 45w charger from the new m1 macbook air enough to Power it?
@Venomynous2 жыл бұрын
It should've come with a charger/plug at this price.
@jdiazdesign33173 жыл бұрын
Thanks Mojaxx you answer all my question in this video
@juggiebonebrain33833 жыл бұрын
Wondering what size laptop it can support with those fall prevention pegs in place?
@vishnuvaid74653 жыл бұрын
Hey Mojaxx, it's everyone.
@DJTechnoboom3 жыл бұрын
Niceee
@ericburgos3 жыл бұрын
Are the USB-A Ports 5Mbps?
@DJSwitchPDX3 жыл бұрын
The USB-C ports are 3.1 standard compliant, and the Type A ports are all 3.0 compliant, which is rated at around 600 MB/s for each port.
@calvincooleyii73943 жыл бұрын
How do u hook up the rane 12 and seventy-two to this. Can someone do a video on that. Or send me a link
@djmiyagi19503 жыл бұрын
I would connect the USBs from the Twelves to the 72 and a USB from the 72 to the stand hub
@calvincooleyii73943 жыл бұрын
@@djmiyagi1950 ok I'll check it out wish there was a video on this. Thank u
@DJkleptic3 жыл бұрын
I have old mac book pro could I go from usb on the stand and usb on my mixer?
@DJSwitchPDX3 жыл бұрын
Yes. It's a USB hub that can be powered off the computer just like any other hub. It doesn't require a USB-C power connector, but the power connection and USB-C passthrough are a really nice option on this hub.