Remounting a roughed shaped salad bowl on the lathe.

Professional woodturner Glenn Lucas shows some techniques for remounting rough shaped bowls which have distorted during the drying process. For more information and to purchase corrugated rubber see www.glennlucaswoodturning.com...

[@DanJoy07]

I found this to be a wonderful instruction. Your Methods of centering a warped structure seem bullet-proof. Thank You!

[@GlennLucasWoodTurner]

Glad it was helpful!

[@inspectr1949]

Just got back into bowl turning after 2 years away from it no better refresher teacher anywhere then you Glenn.

[@UndertheWaterDesign]

Fantastic Glenn. On the way to the shop to make one shortly. Just purchased two sets of nested bowl blanks to begin this next journey.

[@glenncurtis6037]

Ingenious! I just made one. Thanks for yet another great idea from Glenn Lucas.

[@GlennLucasWoodTurner]

You are welcome.

[@cam1967ss]

Thank you for sharing your tips, Glenn.

[@GlennLucasWoodTurner]

My pleasure!

[@DanaOredson]

Great overview of re-mounting a bowl for finishing. I learned a lot!

[@erniegray3500]

Just learned some new tips Thanks

[@WarEagledkp]

Ah, you did mention that aspect in the video. 😉 Thanks for the quick reply. 👍

[@michaelvankoevering3770]

Really nice video Glenn, and always a good reminder of how to get the most out of our bowl blanks. Thanks for taking the time to share this. Be safe.

[@GlennLucasWoodTurner]

Michael Van Koevering Thanks Mike.

[@loujacobs9291]

I had the pleasure of watching a couple of your demos live at Saratoga last year. This was like being back in your audience again. Thank you, and stay healthy!

[@ToolMetrix]

Love this, Glenn. Thanks for sharing! Stay safe. Cheers, Paul

[@GlennLucasWoodTurner]

Thanks, will do!

[@billrogers5870]

1st time I have seen one of your videos great info and very well done ...looking forward to more content!!

[@chrish8294]

Thanks for sharing! I have been eyeing your bowl reversal setup for a while. Great instruction as always!

[@mikestafford8371]

What a useful video with great instruction and explanations. For years I have struggled with that warpage that makes the bowl rock and used thick carpet padding mounted on a large plywood disc to help minimize the rocking. Your method is a better way.

[@GlennLucasWoodTurner]

Thank you Mike, I hope that all is well.

[@erickuehne4194]

Nice video Glenn. I've use the mdf disk with carpet padding and had great success with it.

[@GlennLucasWoodTurner]

Great to hear you like it. The carpet padding will do the job. Interested how it holds up over time so I can give feedback to others.

[@marshallgorrow5543]

Thanks for sharing your knowledge and jigs with us.

[@randyhogan3071]

Very helpful video. Thank you very much!

[@redheadhippiewoodturning4694]

Thank you for sharing a video Lucas! I enjoyed watching you do some more turning and I’ll definitely be making the gadget to help out with my bowls that have dried offset. Have a great weekend my Irish friend 🤙

[@GlennLucasWoodTurner]

Glad you enjoyed it! take care.

[@TimRobertsonWoodturning]

Thank you very much for the video. I have a set of your videos and this just adds to the collection.

[@GlennLucasWoodTurner]

thank you Tim for all your support.

[@mikedoyle5362]

Thankyou Glenn, hope you and family are staying safe and secure. The instructions are great and now I believe I’ll head out to the shop and make a couple of the rubber face discs. Cheers

[@seankelleher3697]

Excellent as usual Glenn must make one of those to add to my workshop arsenal .. Thanks for sharing . Stay Safe

[@pettigrewwoodworks]

Excellent instruction. Hope you and your family are staying safe.

[@GlennLucasWoodTurner]

Yes we are. Thankyou.

[@WOODTURNINGBYBRANDSTRUP]

Thank you Glen for sharing, stay safe 😃😃

[@GlennLucasWoodTurner]

Thank you, I will

[@geofkusch3934]

Thanks, Glenn. I studied with you last year at Marc Adams, and I use your techniques on every bowl I make. Your instruction technique is excellent. I hope you will video doing a final turning of one of these beautiful bowls. Cheers and I hope progress on the new school can begin again soon. Be safe.

[@raydriver7300]

So interesting. Thank you for sharing 🌞

[@GlennLucasWoodTurner]

Glad you enjoyed it

[@JoelElder2013]

Great video Glenn, thanks for sharing it's very timely knowledge for me. 😁

[@GlennLucasWoodTurner]

Glad to hear it

[@gynenesullivan3218]

Good to see this process, especially the faceplate mounting. Thanks and hope you and your family are safe and healthy!

[@GlennLucasWoodTurner]

Thanks Gynene. We are all well but ready to get out into the world again.

[@pcicchin]

Brilliant!

[@fredricksickelbower9431]

Thank you very good information.

[@GlennLucasWoodTurner]

You are welcome

[@jamesanderson9441]

Great video Glenn. I use a face plate centering tool/jig for attaching the plate to the bowl blank. The centering jig made by Gord Rock on KZbin works well. Makes centering the face plate a breeze. Stay healthy and safe.

[@AsherLangton]

If you have access to a 3d printer, you can print out this little gadget that screws right into a faceplate and allows you to align it with the center: www.thingiverse.com/thing:5030806

[@tomshahriari6602]

Brilliant

[@johnmitchell1614]

Hello Glenn, thanks for the interesting demonstration. Can I ask what the threaded attatchment you have on the tailstock centre is for? You've got another subscriber. Best regards.

[@GlennLucasWoodTurner]

it is a tenon sizer and available from our website www.glennlucas.com

[@eriklarsen6131]

I like your instructional videos, but I miss one thing. When you are coring those bowl blanks, what do you use to seal the wood so it don´t crack? Or is it not necessary?

[@GlennLucasWoodTurner]

All that information is covered in our instructional dvd and downloads. KZbin just gives a flavour of what is on offer :) glennlucaswoodturning.com/product/mastering-woodturning-series-no-2-bowl-turning-techniques-dvd-or-download/

[@WarEagledkp]

Enjoyed the instruction & your teaching style is easy to follow. Thank you! New subscriber. Curious why you use two separate raised panels with the corrugated rubber rather than a one complete circular piece for the corrugated rubber? Just conserving material?

[@GlennLucasWoodTurner]

The top of the bowl is not flat after drying so it would rock on a flat surface.