Remove Dryvit Like a BOSS

When in installed correctly E.I.F.S stucco is great stuff... until it isn't, and you need to tear it off. Learn a few tricks I use to 'surgically' remove the foam, mesh and stucco layer all at once! Workin' like a BOSS helps you work more efficiently and look more professional... check it out.
The quickest and easiest way to support video production here at Next Level Carpentry is to click the PayPal icon on my website where it says "Tip the Teacher" here:
www.paypal.com/webapps/shoppi...
You're more than welcome to watch and comment for free but if you find something extra helpful in a video and want to toss in a tip I always appreciate it!
Tools and supplies seen in this video are available through this Influencer's List on Amazon for the same low online price you expect if you need something and can't find it locally:
www.amazon.com/shop/nextlevel...
Amazon pays small 'ad fees' to Next Level Carpentry so I appreciate it when viewers begin their Amazon session through one of these links... thank you!!👍
Here's a complete list of tools and supplies from the Next Level Carpentry Shop that I use and recommend: www.amazon.com/shop/nextlevel...
ATTN: Viewers in Canada now have access to tools used in this video through Amazon.ca to get the low online prices you expect WITHOUT extra import duties, etc! Go to: www.amazon.ca/shop/nextlevelc... to find tools and supplies seen used in this video if you can't find them locally. Purchases made through these links are the same low online prices you expect but Amazon.ca pays small ad fees to Next Level Carpentry which I really appreciate... thank you!!
Need Starbond CA glue for repairing chips on YOUR projects? Great! Next Level Carpentry viewers get 15% off any and all Starbond products by using exclusive offer code "NLC" during checkout at the Starbond website here: www.starbond.com/
Teeshirts and swag from Teespring available here: teespring.com/stores/next-lev... have fun when you meet another fan of Next Level Carpentry wearing a shirt too... or, better yet, get one for someone you know who's already a fan but doesn't' have one😉
If you're motivated to join with those who go above and beyond for Next Level Carpentry as patrons you can do that here at Patreon: / nextlevelcarpentry

[@jimw6991]

First, my house has triple exterior window on side facing morning sun. Originally trimmed in rough sawn cedar, it twisted and warped before framers left (matter of a couple of weeks). Removed it and installed Drivit but I didn't think cement coating over foam would hold so I have durock with foam behind for insulation, then loose fill insulation in the stud wall cavities. I am I in SE michigan, twelve years and still looking good. My workshop has drywall screwed to insuldeck foam cieling panels .... drywall is coming off. Do you think this would work to expose the self tapping stainless drywall screws holding sheets? I have alot of drywall to take off, and it needs a surgical approach.

[@NextLevelCarpentry]

It's definitely worth a try Jim. Since stainless steel is 'less magnetic' than regular steel I'd visit my friends at Total Element Magnets: totalelement.com/ and see what they have in small sized magnets with 'super strength' something like this maybe: totalelement.com/collections/sphere-magnets/products/totalelement-1-inch-neodymium-rare-earth-sphere-magnets-n48-1-magnet You can always call them and explain what you're doing to see if they have something with a higher N-rating. Do me a solid and let them know you heard about them from Next Level Carpentry? Good luck with your project! Best, Matt

[@jimw6991]

@@NextLevelCarpentry Thanks, will do.

[@chefsteven34]

Time is precious on any job site. These time saving tips are like money in the bank. Thank you.

[@garvielloken3929]

Nooice! Love real time on site vids - especially unrehearsed!

[@SoutheasternVirginiaHome-hp1xv]

Great system. I used a hole saw bit and the teeth went right through like butter. This tip saved me so much time. Thanks.

[@jonrocket4106]

Another golden tidbit of Matt Jackson awesomeness!!

[@CybekCusal]

This is what happens what a finish carpenter does rough carpentry 😍

[@villagecarpenter2266]

Master carpenter at work.

[@robertfield4103]

Dryvit is a crummy surface finish in notrthern Illinois, wet with lots of birds looking to make a nest in your walls. Got about 70 locations needing repair after 27 years. Great idea and info for homeowners with dryvit remodelling or repair.

[@jerrystark3587]

We used to build/repair stucco walls using the old steel mesh backing system, which presented its own advantages and disadvantages. Easy removal was NOT an advantage. 🙄 The newer system with foam board like that used in this video is pretty cool. Your removal process really works really well, too. Interesting stuff. Thanks!

[@markbowman3]

Learn something new from you everytime I watch your videos! Thank you and GOD bless you!

[@BlackBuzzzard]

Brilliant! A thinking man's demolition.

[@paulfoytack5267]

I may never use this but it reminds me to think in terms of reverse engineering when doing demo. Also learned that I can't live without a long handled cut out knife.

[@dereksmalls6238]

Love these short onsite videos, thanks for sharing some of your wisdom with us! (I like the long clips too as well...)

[@thadh4085]

I absolutely love this. It's so helpful to get information that not only makes me do a job better, but look at other jobs differently.

[@AMindInOverdrive]

This guy is clever! I like his smart approach to stuff ;-)

[@k.d.8924]

these job site tips/tricks are the best!!

[@VAXHeadroom]

My stepfather "Mik" was a carpenter who apprenticed in one of the old schools in London. He was always looking for, and coming up with, stuff like this. He had a 'rig' for everything - we called them 'Mik's Rigs'. You remind me a lot of Mik and love the content :)

[@jan-reiniervoute6701]

Tool nr 1 is still that grey stuff between yer ears, well wielded by Matt. 👍

[@DianneCarrington]

I would give it a hundred thumbs up if I could. There is nothing like the wisdom of experience. So much more helpful when it is real time video rather than presented in a workshop

[@Beehashe]

In the ‘80s I trained for STOW ,a German version of Drivit, they wanted fiber mesh glued to the substrate then wrapped over the screw heads.

[@richardjones8236]

I wish you would have made this vid years ago. I dislike working with old EIFS very much. But on to a more positive comment, I do like to see how you solve some of these typical onsite problems. Keep making these vids, both shop and job site.

[@xibal3405]

Getting creative to solve issues while working on projects is my favorite part! :) This method is brilliant.

[@gregmislick1117]

Time is money, but appearances of looking like you know what you are doing, and doing it neatly and quickly are worth just as much and are likely to give you excellent word of mouth which is a very powerful marketing tool. Thank you.

[@douggilchrist5131]

I really enjoy your videos. On so many of them you show shortcuts or tips that only a seasoned professional would have learned, including processes for doing work that don't require more time for doing clean up than doing the actual work

[@jimw6991]

My dad used to say work smarter not harder. If you watch a pro work, you usually find a few tips or better ways doing something versus what us DIYers do ... if there was only youtube when I was younger 😊

[@JohnnyUmphress]

Good idea. Work smarter not harder.

[@glennfelpel9785]

There you go again simple but effective. Definitely a good idea. Well done and thank you.

[@toomars1301]

Great ideas as always! Thanks for posting!

[@thomlipiczky9021]

BRILLIANT! Thanks again, Matt

[@thankdrew1173]

This was extremely helpful. Thank you for making this!

[@NextLevelCarpentry]

You're quite welcome! BTW I was literally working on this same house just today, years after making this video and it's still the best method out there for the potentially difficult/messy job of removing Dryvit type cladding IMHO.

[@williamsmith9026]

You're a slickster Mr. NLC! I like it.

[@thomasalison6188]

Nice trick! Thanks for the tip!

[@bonniebarber6114]

I always learn something from you. Great content!

[@pj6366]

Amazing as usual! Another great tip.

[@CrimeVid]

I have never seen that system before, I don’t care if I never see it again !

[@moweber]

I thought it was going to be hole saw, but hole punch! Genius. Bet it would work to perfection with less aggressive hammer blow with a purpose-built tool. You should add one of the hundred options for 1" hole punches on Amazon to your affiliate store and to this videos' mise en place. Don't have the time to watch as much as I used to, but the channel is coming along nicely. Better yet, reach out to another KZbinr to fabricate "spring punch" version?

[@smasica]

You da Man. Pure genius. I hate the way the TV home reno/improvement shows do demolitions. They go in swinging sledge hammers into drywall and on cabinets and counter tops, creating an unholy mess. Then they have a room full of rubble to cart out to the dumpster. I'm sure they do it for 'dramatic effect' in a TV shot, but if that's their real method, then they're idiots, IMO.

[@Caerglyn]

Good stuff! I really like tips and tricks video.

[@EngineerMikeF]

Genius. Definitely next level. And that magnet setup looks idiot proof for finding screws and nails, never seen that.

[@bjornekloo]

Oh man, Matt, your creativity and problem solving is amazing to watch. If i was still working as a carpenter, these tips would have been pure gold for me! It still is, but i will likely forget about it before i actually get to use it. Amazing content you put out!

[@larrystrayer8336]

Thanks for the video very helpful. I used a long flat pry bar. And styrofoam bits everywhere. I definitely will try your way next time.

[@bobd.]

Nice trick Matt. I've done the same using an old hole saw without the arbor. But only for a small piece.

[@mikez4132]

You avoided a mess to expose the real mess hahah good vid as always.

[@NextLevelCarpentry]

True Dat... and I'm not sure I'm to the end of it yet! 😎

[@neilmccann5826]

If I were doing that job....when the piece of metal pipe fell @ 4:56 it would've bounced off the ladder and broken the customers window. 🤨... Murphy's Law

[@Estwing22]

Me too! Except the widow would've already been broken from when I got cocky and flipped the 2 lb sledge. But those windows are coming out anyway. The cocky action that would have cost me the most would have been catching the knife wrong.

[@NextLevelCarpentry]

You guy's are hilarious! Ahhh... the stories we could share, right! 🤣🤣 Makes me thankful for the ability to selectively edit video because my personal 'blooper reel' is extensive!😉 Best, Matt

[@jaygerke6746]

Super fast and efficient. Gotta order one of those magnets!

[@HansWeberHimself]

You ARE the man.

[@corymote9339]

Great video!

[@aalove2010]

Comes off so nice you could put it back on after the header goes in....

[@brucepaterson7752]

I new you were going to use the stud ball finder to find those screws after watching your How to remove drywall. Great advise, Thanks for the video's

[@NextLevelCarpentry]

Old dogs, old tricks, right?! 😉😂😂😎

[@valpanig]

@@NextLevelCarpentry with pipe and Thor came ingenuity

[@andrew3p1]

you produce great videos looking forward to. header replacement !

[@murphymmc]

Great tip.

[@raptorbyk18]

Great Video..!

[@physicsudel2013]

Another great tip!

[@hassanal-mosawi4235]

Thanks for sharing that!

[@bertbergers9171]

Lol you crafty ninja! The knife ;) ;)

[@Rpmsailor]

Nice tip

[@joelongrid7625]

Such a simple solution to a very messy demo project. Although that is what you are all about, common sense tips and tricks that save both time and money. Great video. PS: You might get a million views if you use a cat filter for your head while talking, seems that is pretty popular these days. Ha.

[@villagecarpenter2266]

Well done! IMHO

[@0509kj]

Exposing the screw with a pipe is pretty brilliant.

[@hazlett1927]

Very cool. I am an old man and will never have to do that but I found it very interesting. Using your head is much less work than using brunt force.

[@NextLevelCarpentry]

Demolition is the kind of work that makes us old before our time, right Charlie? 😉😎

[@scottchoi5451]

Amazing

[@omnibuildersnz]

thats a nice tip although as you were explaining the method I guessed a magnet had something to do with it😉 must be a long time watcher...🤣🤣

[@danglecier9462]

Genius!

[@jeffreeves3362]

Thanks brother. Helps me a lot

[@NextLevelCarpentry]

Doesn't seem like many people need to remove dryvit these days but if you do I know you will find this method makes it go a lot better! Good luck Jeff! Best, Matt

[@JoJo-op5xy]

@@NextLevelCarpentry I do, but I want to do it section by section. Only removing some at a time and replacing it with something else. Idk if this is a smart idea. I don’t have a lot of time on my hands but the eifs system is failing in some areas. No one is around that can help me.

[@simonrizk4451]

cheers sir

[@chipshot4429]

Hey Matt, great tip on the Dryvit removal. I have not dealt with that material very much here in Maryland but if I do that is a great heads up and I always like to work cleaner in the demo stages. All the best!!!

[@NextLevelCarpentry]

Thanks Chipshot... nice to see a comment from you here... it's been awhile. Hope all's well with you? Best, Matt

[@steveg5576]

As usual - top level advice. Fortunately, my insurance won't let me touch the stuff...

[@edcrego396]

Let's get to it I'm also wondering how your going to tackle the next level getting that header in there I have old farm house and the original part was logs during a bath room up grade I found the same vertical logs I scabbed temp,, 2 by 6 supported it cut out for new beam installed new beam ,,it worked out nicely,, but I'm sure you have a much better approach that I'm anxious to see thanks for sharing your ideas helps us become better craftsman !!!!!

[@ServiceTrek]

great tip ... i'd like to see you taking out the french doors and windows too if there are any good tips to share.

[@williamsmith9026]

I just drive through them

[@bradgotschall3259]

Nice video. Taking a little time to think the game through separates you from the lesser apes😜. Neodymium magnets really are amazing little things. Maybe try Xeroxing and blowing up your multi tool for log cuts 😂. I’ll be interested to see your method. (a giant Fein Multimaster really would be awesome). Maybe an electric chainsaw with some type of depth stop to make the majority of the cut???? Waiting patiently to see your solution 😊

[@deanp1823]

Great method Matt. A lot like how you remove drywall. I hope that you make a video of cutting in that header.

[@NextLevelCarpentry]

Thanks Dean. Unfortunately cutting in that header is too obscure a 'topic' to warrant a video production showing it... sorry. It took a solid day to do all the layout, notching, chiseling, fitting, etc but the LVL's slipped in line a dream in the end. Actually got the patio door assembled and did initial installation late Saturday allowing a huge sigh of relief after a tough, demanding project... Best, Matt

[@deanp1823]

@@NextLevelCarpentry Totally understand Matt. That's a good way to describe that work. Always the type of work I've enjoyed though. Keep the videos coming, your experience is super helpful and appreciated.

[@jsteifel]

shorter videos = better.. most of the time I don't use a stud finder, I use a chain and a neo magnet. I find the screws easily and, now I know where the studs are... just like the old magnet stud finders but more accurate and faster.

[@russmartin4189]

I bought one of those stud balls, but the chrome surface chipped off. It is a good tool, but I'm not happy about the surface not being smooth now.. I just wrote to them. Hopefully they will replace it.

[@NextLevelCarpentry]

Yeah, the chrome surface leaves a bit to be desired but it doesn't affect the magnets' pulling power that I can tell. Let us know how you make out on your quality control issue? Thx!

[@somedudeRyan]

and you get some free screws, haha

[@sethc4758]

sure wish i wouldve seen this video before tearing off an 8,000 sq ft house we are currently working on.. though it wouldve hardly saved us since around 20 square of it was glued down without rhyme or reason.

[@beachboardfan9544]

Where is this exterior system done at? I've never seen this type of exterior b4.

[@tomcooper748]

Clever tip, so typical of your Next Level ingenuity. However, not so typical of your videos is this one left us with more questions then were answered. Such as "logs" !!? you didn't seem too phased by finding vertical logs embedded in the wall! Seems bizarre to me, is this something commonly done in your area? the real story would have been how you tore it all out and replaced it with minimal mess and disruption. And the "pipe knife" struck some curiosity, could you expand on that in the future? Thanks Matt, I always enjoy your videos no matter what the subject is.

[@NextLevelCarpentry]

The story behind vertical logs in this home is a documentary in itself, Tom, one that is so far off in the weeds that even I didn't go there! 😂 The original home was built in 1923 as club house to a now extinct golf course, if you can believe THAT! In South Dakota in 1923 vertical log construction was a familiar but never 'common' due to the abundance of straight spruce trees of a suitable size to make it perfectly suited for structures of this type and purpose. Thankfully I was warned by the homeowner and previous contractor to be aware of those logs hiding in the walls and was prepared for them... well, sort of! Without a film crew and extensive video production team telling 'the real story' is virtually impossible for me to produce but I do believe showing how I installed a two-ply 13+' x 14" LVL header to support the roof over a new Pella patio door would make for very interesting and informative video. Here's a bit more insight into the pipe knives I don't leave home without: kzbin.info/www/bejne/ioeQeGCPZqiUick Watch the end of the video where I make the protective wood sheath for that long, dangerous blade. plus a very useful application for using it/them: kzbin.info/www/bejne/qGm3eWN4jpmGoJI Hope that helps... it's the best I can do for you these days... Best, Matt

[@tomcooper748]

@@NextLevelCarpentry ohhhh, that pipe knife. I thought it was something you invented for yourself. Thanks for the link to your sheetrock removal video. A couple of more likes coming up!

[@paulheitkemper1559]

Totally remove or just cut them short? If it's just cut them short, I'd spike a 2x6 to the face of them and support it by that while you cut them and install the beam.

[@Tolgahan-mk8ux]

I want to be a boss... In trucking

[@larrydew6960]

4" or 6" length of Pipe would have a sharper edge and be easier to hold when using the BFH.

[@NextLevelCarpentry]

Right you are Larry... in fact the electrician suggested using a piece of 2" dia EMT. With it's thin wall we guess it would take less of a whack to pop out the stucco stuff. Next time I have to do this stuff I'll combine suggestions and use a 6" piece of 2" EMT and see if we're right. I always appreciate alternate viewpoints from viewers like you who are comfortable thinking outside the box... Thanks for the comment/suggestion! Best, Matt

[@azcharlie2009]

We built our house in 2017. I've notice that we now have some massive cracks in the Dryvit! Can you patch this stuff, or does it have to be removed and redone?

[@mattjackson3996]

A certified contractor can repair cracks with an overlay but massive cracks are more likely an indication of structural issues so repairing the cracks is like putting Band-Aids on a deep wound. Far better to Define and address underlying issues to avoid recurring cracks or structural failures IMHO

[@azcharlie2009]

@@mattjackson3996 Normally, I'd agree that it's structural. But, we live in Arizona, and it has been REALLY HOT. Lots of UV exposure. The cracks are only where there's lots of exposure to the sun. Getting someone to work on it is about impossible. Everyone is so busy, they don't need your business.

[@NextLevelCarpentry]

@@azcharlie2009 Ah... I see. FWIW I recently had a couple guys from a commercial crew 'repair' a gap on dryvit on my own home. Never could have got the company they work for to do the little job but, being ambitious guys, they seemed almost eager to do my little project after hours. Probably charged me 2~3x what they get paid on their day job but I didn't balk because it was what it took to get it done. You might consider stopping by an ongoing project jobsite at lunch or end of day and talking to they guy who drives the nicest truck because he could probably earn an extra truck payment by moonlighting for you...

[@fullmetalsasquach8229]

So what if the foam is glued on ?

[@NextLevelCarpentry]

It's going to be messier and mpre difficult but this is still the best way to start IMHO.

[@pirakoXX]

Hi. This is off-topic of this video, but I really need some advice about kitchen cabinet drawer finish.. (As in finish, not Finish, like when our crown prince is known for saying this when he's abroad and servants after a meal come and ask him "Are you finish?" and he always answers: "No, I'm Danish"... ) I know, I need to work on my humor too! Back to this topic: I just got my (first :D) table saw and one of my first projects is trying to make 2+2+3 big drawers for 3 cabinets under my kitchen tabletop, where I now have just one shelf in the middle of each. With 23 x 23 inches (w x d) there is a ton of space (and things) in each cabinet, but it's impossible to reach anything in the back of the shelves without taking more than half of the things out... I don't want to use paint or lacquer on the plywood, as I like the natural look/color, and how it darkens over time, but what kind of finish should I use instead? I'm considering a natural bee wax, as the drawers are for the kitchen; dry food, plates, bowls, etc. But is there a better solution? Perhaps a combination of 2 materials? And easy to put on and to clean? I really appreciate all kinds of advice, what to do as what not to do, as I'm now entering my pre-level carpentry skills. 👍 Greetings from Denmark ❤️

[@NextLevelCarpentry]

My favorite 'tactile' finish for wood is NOT Danish oil... sorry... my humor is lacking too... but is gel polyurethane as you can see me use near the end of this video: kzbin.info/www/bejne/d2fQppyAaZeMaKs It's easy to apply like beeswax (also a nice product) but much more durable and permanent. Not sure if you can find the Old Master's brand there so another brand is Bartley's but I've not used their product for full endorsement... hope that helps? Best, Matt

[@pirakoXX]

Thank you SO much, Matt, it sure helps me a lot! :D Just saw yesterday we now can buy the "Danish Oil" I've seen in videos from USA; online from a Danish company ... imported from the USA! :D Many years ago this product "Amerikansk Olie" (American Oil) was very common used ere in Denmark, not for wood working, though, but 1-2 spoonful of this thick, brown fluid, that tasted awful ... but was very effective as a laxative!! :D Last thing about "Danish", and a lot more tasty: The American "Danish" pastry is here in Denmark called "Wienerbrød" (bread from Wien / Vienna). What a crazy and wonderful world we are living in! Until next time, stay safe (Y) Pia

[@dirkg7062]

Great tips but unfortunately E.I.F.S. is not always installed with screws.

[@prototype3a]

logs? WHAT? lol

[@ksingleton101]

This will only work if the Dryvit application is not installed correctly. The correct application is when the mesh is embedded in the base coat. I'm not saying this process won't work but I'm just saying it won't be so easy or clean. The screw heads will also be embedded with the base coat making it almost impossible to use a screw driver or screw gun to remove the screws. Most likely this was not done by Licensed Dryvit Technician's but rather by illegals, those who have only learned from others that don't know the application processes .

[@NextLevelCarpentry]

Thanks for watching the video and commenting Low Joe but it's important for me to tell others who read your comment that it's not true. If you look closely you'll notice that the mesh IS embedded in the base coat... you can see the blue colored mesh in the circles left after driving the pipe. You'll also see that it's very possible to the point of being easy to remove the screws exactly as shown. It might be easier to remove stuff installed by unlicensed techs who omit the mesh but it works just as easily as seen in the video when installed correctly. Best, Matt