Remove internal BEARING without EXTRACTOR

  Рет қаралды 3,834

Jorge E. Penagos P.

Jorge E. Penagos P.

Күн бұрын

To remove an internal bearing, either because it is very small or we do not have a suitable extractor, we can use this simple and quick method.
We need a little wet flour dough or plasticine that we will fill in the hole of the bearing that we want to remove.
With an old drill bit with a diameter smaller than the bearing hole and using some tape to prevent the flour dough from escaping, we began to hit and compress the dough.
The mass begins to push the bearing outwards, add more mass and compact again with the drill bit and hammer, in a few seconds we open and remove the internal bearing without an extractor and very easily.

Пікірлер
Engine overheating due to COUNTERFEIT oil filter: How to know
3:22
Jorge E. Penagos P.
Рет қаралды 2 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
Cómo Probar BOMBA DE GASOLINA con multimetro SIN DESMONTAR
6:48
Jorge E. Penagos P.
Рет қаралды 3,5 М.
Si MOTOR NO ENCIENDE prueba la BOMBA DE GASOLINA
9:04
Jorge E. Penagos P.
Рет қаралды 4,3 М.
Video Explicando sobre Rolamento Coluna DIREÇAO Renault Logan Sandero
2:33
Knife Like Razor Sharp! Sharpen Any Knife in 1 Minute with an Old Battery
10:12
How to know if the ALTERNATOR IS CHARGING BATTERY with TORQUE application
4:12
Amazing Hydraulic Press!! Powerful DIY Hydraulic Press!!
15:51
KEVGEN MASTER
Рет қаралды 40 М.
Cómo COMPRAR UNA BATERÍA  de auto
1:43
Jorge E. Penagos P.
Рет қаралды 1,8 М.