Remove Stripped Screws Like a Pro

A stripped screw is one in which the slots in the top of a screw have worn out. This makes it difficult for a screwdriver to grasp the screw and turn it. Check out this video to see how we remove a stripped screw with the soldering iron and paste flux.

[@nxtmobilerepair4794]

😂 car mechanics have been doing this awhile - great concept

[@dolanvincent9630]

Lmao I was Ganna say that, I didn't know there was a tech version of welding a nut lol

[@surajsurya1928]

But there is a twist ?...it can only be done if the frame(especially screw thread) is made of metal...Else RIP screw threads:)

[@localnyraccoon]

it's all fun and games until the second screw gets stripped

[@siddhesh6530]

i used to just solder a screwdriver lol

[@SixSilverStones]

Solder fixes everything, doesn’t it

[@KabutoRyu]

Rewa? They have all skills what they needed

[@JuanSosa-sk7li]

Por la cantidad de calor que se produce al momento de realizar la soldadura, se dañan las partes plásticas circundantes.

[@emcee-rit]

Amazing man

[@SaiyedR]

I hope all screws are tin able

[@bobspong777]

good job!

[@fanfan54old]

It works... but you need to solder and to use solder flux / paste. When I was younger, when I had to take off the plastic mid frame of my ZenFone 2, secured by a lot of screws (and 3 or 4 stripped screws), after trying a couple methods (including the elastic)... I ended up cutting the plastic mid frame around the tripped screws 🤣 🤣 🤣

[@TtechA-ml2ju]

I ripped my iphone 8 screen off when the pentolope screw stripped lol

[@sshaikh3878]

Awesome!

[@makc54321678]

Ещё проще - после пропаривания "остатков шлицов", вставить в припой биту. И открутить так.

[@user-kn5kj2do5i]

Возьму на вооружение

[@Patrik2166]

Work smart not hard :)

[@paulcresswell6268]

Now put it back together again.

[@Perfectmobilecare]

thx bro

[@yadulchandradas9636]

I think there are way too simple ways of doing that

[@TechnoWolf]

Tell me another way

[@mustafaefe3740]

Greetings from Turkey, thanks for this practical information 👏👏

[@lewiscalvert5439]

Just wondering why the gut added flux to the screw before soldering it

[@Dan_711]

so the solder adheres to the screw better

[@GORILLAZ41]

Can't solder without flux

[@lewiscalvert5439]

@@GORILLAZ41 do you know the full purpose of flux ?

[@lewiscalvert5439]

It uses capillary action to draw the molten led or solder into places you need them like with pipes and stuff but if you have easy access to the area there is no need

[@onixthedestroyer5928]

I don't have any of those things

[@TFIta369]

What can I do if the solder doesn't stick to the screw I want to remove? 😔

[@rewatechnology2008]

How about removing the stripped screw with a grinding pen? kzbin.info/www/bejne/nJWmZKiwn7GcbMk

[@iml404]

Вот это ты гений (нет)

[@arvetiashok8599]

Super

[@sumonhossain412]

So funuy..🤣🤣🤣🤣

[@ItaloLoureiro]

Yo dawg..

[@milonahmed2726]

Good job rewa love you 😍

[@Cerberus4982]

Now put it back

[@andrew-qp9qn]

totally rewa has wasted 2 screws 😂😂😂

[@davidsicca2352]

Try a hammer next time...

[@Revon-Feuer]

How to break your phone

[@hsuit23]

0:00

[@ulilamrimanik9533]

Malah copot ntar yang di casenya

[@yagzsonmez6070]

System GG

[@AbdulAziz4CaNaDa]

Over complicated & Time consuming.

[@alonsoechevarriaadrian506]

Noooooo amigo, gente porfavor no le hagan eso a sus dispositivos xd

[@potatoperson3875]

Just use rubber band daaammmm.

[@Dariuszdaro-eu6hv]

thank you 👍🏻

[@user-bt3oq1ul3c]

Очень неаккуратно..

[@pukesey1]

wow best way 😋thanks🙏

[@gudelauneee]

Seriously? Omg

[@skfarook1796]

Kai bar n k my

[@hifunfactz]

😂

[@dark_mode]

Chance of damaging cables with heat

[@abhisheknaik8317]

Great 🔥

[@NeverFamous.T-T]

low quality than those made from chaina

[@roodeecanplay]

just use the rubber

[@OggyShows]

If you do it wrong it will stick all over the motherboard

[@nemvictor]

А сразу нормальную отскоку взять не судьба 😢

[@ilyasg2108]

what about using a rubber band.... it's so much easier

[@13aaryan]

You need to put a lot of downward force for it to work. Phones are fragile for that to work properly..

[@duckidenis11]

Just use a small rubberband over the screw

[@konner1166]

ive tried that so many times and it has never worked

[@lovedale111]

It doesnt work. The rubber band breaks when we use the screwdriver on it

[@mahiakash6352]

Ideot ideo

[@wishdankpods]

just do the rubber band trick

[@CreepyJoe69]

Create a problem that doesnt exist.

[@4_hass]

Нахуя и зачем? Взять бормашину, сделать насечку и открутить плоской отвёрткой не портя антену нельзя? Где сейчас этот нига который всем обьясняет как правельно делать элементарные вещи? 👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎

[@user-ro5is7mw6o]

Говнофоны рулят !

[@newrijanmobilelaptopsolution]

3rd comment😍

[@Neeraj_kumar]

Super